[1] [1] ZHANG J, WANG J, DONG S, et al. A review of the current progress and application of 3D printed concrete［J］. Compos Part A: Appl S, 2019, 125: 105533.

[3] [3] LI Z, HOJATI M, WU Z, et al. Fresh and hardened properties of extrusion-based 3D-printed cementitious materials: A review［J］. Sustainability, 2020, 12(14): 5628.

[5] [5] BABAFEMI A J, KOLAWOLE J T, MIAH M J, et al. A concise review on interlayer bond strength in 3D concrete printing［J］. Sustainability, 2021, 13(13): 7137.

[6] [6] MOELICH G M, KRUGER J, COMBRINCK R. Modelling the interlayer bond strength of 3D printed concrete with surface moisture［J］. Cem Concr Res, 2021, 150: 106559.

[7] [7] LIANG R, LIU Q, HOU D, et al. Flexural strength enhancement of cement paste through monomer incorporation and in situ bond formation［J］. Cem Concr Res, 2022, 152: 106675.

[9] [9] GENG Z, SHE W, ZUO W, et al. Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization［J］. Cem Concr Res, 2020, 138: 106220.

[10] [10] CHEN J, QIAO M, GAO N, et al. Acrylate based post-acting polymers as novel viscosity modifying admixtures for concrete［J］. Constr Build Mater, 2021, 312: 125414.

[12] [12] YIN B, HUA X, QI D, et al. Performance cement-based composite obtained by in-situ growth of organic-inorganic frameworks during the cement hydration［J］. Constr Build Mater, 2022, 336: 127533.

[15] [15] LIU Q, LIU W, LI Z, et al. Ultra-lightweight cement composites with excellent flexural strength, thermal insulation and water resistance achieved by establishing interpenetrating network［J］. Constr Build Mater, 2020, 250: 118923.

[16] [16] LIU Q, LU Z, HU X, et al. A mechanical strong polymer-cement composite fabricated by in situ polymerization within the cement matrix［J］. J Build Eng, 2021, 42: 103048.

[19] [19] YAO H, XIE Z, LI Z, et al. The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite［J］. Constr Build Mater, 2022, 316: 125809.

[20] [20] CHEN B, QIAO G, HOU D, et al. Cement-based material modified by in-situ polymerization: From experiments to molecular dynamics investigation［J］. Compos Part B: Eng, 2020, 194: 108036.

[21] [21] CHU Y Y, SONG X F, ZHAO H X. Water-swellable, tough, and stretchable inorganic-organic sulfoaluminate cement/polyacrylamide double-network hydrogel composites［J］. J Appl Polym Sci, 2019, 136(35): 47905.

[29] [29] YU S, XIA M, SANJAYAN J, et al. Microstructural characterization of 3D printed concrete［J］. J Build Eng, 2021, 44: 102948.

[30] [30] LIU J, LI S, GUNASEKARA C, et al. 3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure［J］. Constr Build Mater, 2022, 314: 125561.