[1] W GAO, S IBARAKI, M A DONMEZ et al. Machine tool calibration： measurement， modeling， and compensation of machine tool errors. International Journal of Machine Tools and Manufacture, 187, 104017(2023).

[2] Z ZHANG, F JIANG, M LU et al. Geometric error measuring， modeling， and compensation for CNC machine tools： a review. Chinese Journal of Aeronautics(2023).

[3] [3] 徐凯， 李国龙， 李喆裕， 等. 基于参数化建模的旋转轴误差快速辨识方法［J］. 仪器仪表学报， 2020， 41（8）： 21-29. doi: 10.19650/j.cnki.cjsi.J2006557XUK， LIG L， LIZH Y， et al. Fast error identification method for rotary axis based on parametric modeling［J］. Chinese Journal of Scientific Instrument， 2020， 41（8）： 21-29.（in Chinese）. doi: 10.19650/j.cnki.cjsi.J2006557

[4] D W RUAN, J MAO, G LIU et al. Synchronous motion error identification method of dual-five-axis CNC machine tool based on R-test. The International Journal of Advanced Manufacturing Technology, 1-9(2021).

[5] [5] 殷建， 李明. 基于激光跟踪仪的五轴机床旋转轴误差测量［J］. 中国激光， 2015， 42（4）： 0408005. doi: 10.3788/cjl201542.0408005YINJ， LIM. Error measurement of rotating shaft of five-axis machine tool based on laser tracker［J］. Chinese Journal of Lasers， 2015， 42（4）： 0408005.（in Chinese）. doi: 10.3788/cjl201542.0408005

[6] S YIN, H ZHOU. A vision-based error identification method for separating geometric errors of rotating axes in five-axis platforms. Measurement, 205, 112185(2022).

[7] S OSEI, W WANG, Q DING. A new method to identify the position-independent geometric errors in the rotary axes of five-axis machine tools. Journal of Manufacturing Processes, 87, 46-53(2023).

[8] [8] 郭世杰， 姜歌东， 梅雪松， 等. 转台-摆头式五轴机床几何误差测量及辨识［J］. 光学 精密工程， 2018， 26（11）：2684-2694. doi: 10.3788/ope.20182611.2684GUOSH J， JIANGG D， MEIX S， et al. Measurement and identification of geometric errors for turntable-tilting head type five-axis machine tools［J］. Opt. Precision Eng.， 2018， 26（11）：2684-2694.（in Chinese）. doi: 10.3788/ope.20182611.2684

[9] [9] 郑华林， 项锡平， 胡腾， 等. 五轴加工中心旋转轴几何误差元素区别建模辨识技术［J］. 中国机械工程， 2021， 32（5）：547-555. doi: 10.3969/j.issn.1004-132X.2021.05.006ZHENGH L， XIANGX P， HUT， et al. Distinct modeling and identification technology for rotary axes geometric error elements of five axis machining centers［J］. China Mechanical Engineering， 2021， 32（5）：547-555.（in Chinese）. doi: 10.3969/j.issn.1004-132X.2021.05.006

[10] (2012).

[11] [11] 阮大文， 茅健， 刘钢， 等. 双五轴数控铣削机床旋转轴误差辨识方法［J］. 中国机械工程， 2020， 31（13）：1548-1554. doi: 10.3969/j.issn.1004-132X.2020.13.005RUAND W， MAOJ， LIUG， et al. A method for error identification of rotation axes of dual-five-axis CNC milling machines［J］. China Mechanical Engineering， 2020， 31（13）：1548-1554.（in Chinese）. doi: 10.3969/j.issn.1004-132X.2020.13.005

[12] Y Z PU, L WANG, M YIN et al. Modeling， identification， and measurement of geometric errors for a rotary axis of a machine tool using a new R-test. The International Journal of Advanced Manufacturing Technology, 117, 1491-1503(2021).

[13] [13] 皮世威， 刘强， 孙鹏鹏. 基于激光干涉仪的旋转轴误差快速检定方法［J］. 仪器仪表学报， 2017， 38（10）： 2484-2491. doi: 10.3969/j.issn.0254-3087.2017.10.017PISH W， LIUQ， SUNP P. Geometric error detection for rotary feed drive based on laser interferometer［J］. Chinese Journal of Scientific Instrument， 2017， 38（10）： 2484-2491.（in Chinese）. doi: 10.3969/j.issn.0254-3087.2017.10.017

[14] M DENG, H LI, S XIANG et al. Geometric errors identification considering rigid-body motion constraint for rotary axis of multi-axis machine tool using a tracking interferometer. International Journal of Machine Tools and Manufacture, 158, 103625(2020).

[15] W H CHEN, B R LI, T ZHAO et al. Vision measurement system for position-dependent geometric error calibration of five-axis machine tools. The International Journal of Advanced Manufacturing Technology, 123, 3969-3981(2022).

[16] [16] 刘巍， 李肖， 李辉， 等. 基于双目视觉的数控机床动态轮廓误差三维测量方法［J］. 机械工程学报， 2019， 55（10）：1-9. doi: 10.3901/jme.2019.10.001LIUW， LIX， LIH， et al. Binocular vision-based three-dimensional contouring error calibration method for NC machine tools［J］. Journal of Mechanical Engineering， 2019， 55（10）：1-9.（in Chinese）. doi: 10.3901/jme.2019.10.001

[17] [17] 侯艳丽， 苏显渝， 陈文静. 旋转视觉测量系统相机光心与转轴距离的标定方法［J］. 光学学报， 2022， 42（21）： 2112001. doi: 10.3788/AOS202242.2112001HOUY L， SUX Y， CHENW J. Calibration method of distance between optical center of camera and rotation axis in rotating vision measurement system［J］. Acta Optica Sinica， 2022， 42（21）： 2112001.（in Chinese）. doi: 10.3788/AOS202242.2112001

[18] Z FANG, Z C CHEN, T FANG et al. Simultaneous calibration of probe parameters and location errors of rotary axes on multi-axis CNC machines by using a sphere. Measurement, 188, 110389(2022).

[19] S IBARAKI, R OKUMURA. A machining test to evaluate thermal influence on the kinematics of a five-axis machine tool. International Journal of Machine Tools and Manufacture, 163, 103702(2021).

[20] Test conditions for machining centres - Part 7： Accuracy of finished test pieces： ISO 10791-7： 2014［S］. International Organization for Standardization(2014).

[21] Test conditions for machining centres - Part 7： Accuracy of finished test pieces： ISO 10791-7： 2020［S］. International Organization for Standardization(2020).

[22] S IBARAKI. A machining test to calibrate rotary axis error motions of five-axis machine tools and its application to thermal deformation test. International Journal of Machine Tools and Manufacture, 86, 81-88(2014).

[23] Z JIANG, B SONG, X ZHOU et al. On-machine measurement of location errors on five-axis machine tools by machining tests and a laser displacement sensor. International Journal of Machine Tools and Manufacture, 95, 1-12(2015).

[24] S IBARAKI, I YOSHIDA, T ASANO. A machining test to identify rotary axis geometric errors on a five-axis machine tool with a swiveling rotary table for turning operations. Precision Engineering, 55, 22-32(2019).