[1] [1] NEGRO L B A, PLLMANN H, DA COSTA M L. Production of low-CO2 cements using abundant bauxite overburden “Belterra Clay”［J］. Sustainable Materials and Technologies, 2021, 29: e00299.

[2] [2] GLASSER F, ZHANG L. High-performance cement matrices based on calcium sulfoaluminate-belite compositions［J］. Cement and Concrete Research, 2001, 31(12): 1881-1886.

[3] [3] CHEN I A, JUENGER M C G. Incorporation of coal combustion residuals into calcium sulfoaluminate-belite cement clinkers［J］. Cement and Concrete Composites, 2012, 34(8): 893-902.

[4] [4] GARCA-MAT M, DE LA TORRE A G, LEN-REINA L, et al. Effect of calcium sulfate source on the hydration of calcium sulfoaluminate eco-cement［J］. Cement and Concrete Composites, 2015, 55: 53-61.

[5] [5] PRA J, AMBROISE J. New applications of calcium sulfoaluminate cement［J］. Cement and Concrete Research, 2004, 34(4): 671-676.

[6] [6] LI P, GAO X, WANG K, et al. Hydration mechanism and early frost resistance of calcium sulfoaluminate cement concrete［J］. Construction and Building Materials, 2020, 239: 117862.

[8] [8] PELLETIER-CHAIGNAT L, WINNEFELD F, LOTHENBACH B, et al. Influence of the calcium sulphate source on the hydration mechanism of Portland cement-calcium sulphoaluminate clinker-calcium sulphate binders［J］. Cement and Concrete Composites, 2011, 33(5): 551-561.

[9] [9] TAN B W, OKORONKWO M U, KUMAR A, et al. Durability of calcium sulfoaluminate cement concrete［J］. Journal of Zhejiang University: Science A, 2020, 21(2): 118-128.

[10] [10] JUENGER M, WINNEFELD F, PROVIS J, et al. Advances in alternative cementitious binders［J］. Cement and Concrete Research, 2010, 41(12): 1232-1243.

[13] [13] YOU X, HU X, HE P, et al. A review on the modelling of carbonation of hardened and fresh cement-based materials［J］. Cement and Concrete Composites, 2022, 125: 104315.

[14] [14] MORANDEAU A, THIRY M, DANGLA P. Investigation of the carbonation mechanism of CH and C-S-H in terms of kinetics, microstructure changes and moisture properties［J］. Cement and Concrete Research, 2014, 56: 153-170.

[15] [15] LI Y Q, LIU W, XING F, et al. Carbonation of the synthetic calcium silicate hydrate (C-S-H) under different concentrations of CO2: chemical phases analysis and kinetics［J］. Journal of CO2 Utilization, 2020, 35: 303-313.

[16] [16] THIERY M, VILLAIN G, DANGLA P, et al. Investigation of the carbonation front shape on cementitious materials: effects of the chemical kinetics［J］. Cement and Concrete Research, 2007, 37(7): 1047-1058.

[17] [17] PETER M A, MUNTEAN A, MEIER S A, et al. Competition of several carbonation reactions in concrete: a parametric study［J］. Cement and Concrete Research, 2008, 38(12): 1385-1393.

[21] [21] NISHIKAWA T, SUZUKI K, ITO S, et al. Decomposition of synthesized ettringite by carbonation［J］. Cement and Concrete Research, 1992, 22(1): 6-14.

[22] [22] NDIAYE K, CYR M, GINESTET S. Durability and stability of an ettringite-based material for thermal energy storage at low temperature［J］. Cement and Concrete Research, 2017, 99: 106-115.

[23] [23] PLANK J, ZHANG-PREE M, IVLEVA N, et al. Stability of single phase C3A hydrates against pressurized CO2［J］. Construction and Building Materials, 2016, 122: 426-434.

[24] [24] GROUNDS T, G MIDGLEY H, NOVELL D V. Carbonation of ettringite by atmospheric carbon dioxide［J］. Thermochimica Acta, 1988, 135: 347-352.

[25] [25] STEINER S, LOTHENBACH B, PROSKE T, et al. Effect of relative humidity on the carbonation rate of portlandite, calcium silicate hydrates and ettringite［J］. Cement and Concrete Research, 2020, 135: 106116.

[28] [28] COLLIER N C. Transition and decomposition temperatures of cement phases—a collection of thermal analysis data［J］. Ceramics-Silikty, 2016, 60(4): 338-343.

[29] [29] HARGIS C W, LOTHENBACH B, MLLER C J, et al. Carbonation of calcium sulfoaluminate mortars［J］. Cement and Concrete Composites, 2017, 80: 123-134.

[30] [30] ZHANG Y, OPUROLU O. The role of hydrotalcite-like phase and monosulfate in slag cement paste during atmospheric and accelerated carbonation［J］. Cement and Concrete Composites, 2022, 132: 104642.

[31] [31] MATSCHEI T, LOTHENBACH B, GLASSER F P. The AFm phase in Portland cement［J］. Cement and Concrete Research, 2007, 37(2): 118-130.

[32] [32] MESBAH A, CAU-DIT-COUMES C, FRIZON F, et al. A new investigation of the Cl--CO2-3 substitution in AFm phases［J］. Journal of the American Ceramic Society, 2011, 94(6): 1901-1910.

[33] [33] GLASSER F P, KINDNESS A, STRONACH S A. Stability and solubility relationships in AFm phases［J］. Cement and Concrete Research, 1999, 29(6): 861-866.

[35] [35] ZHAO J, SUN C, WANG Q, et al. Thermodynamic, mechanical, and electronic properties of ettringite and AFm phases from first-principles calculations［J］. Construction and Building Materials, 2022, 350: 128777.

[36] [36] MORANDEAU A E, WHITE C E. In situ X-ray pair distribution function analysis of accelerated carbonation of a synthetic calcium-silicate-hydrate gel［J］. Journal of Materials Chemistry A, 2015, 3(16): 8597-8605.

[37] [37] SEVELSTED T F, SKIBSTED J. Carbonation of C-S-H and C-A-S-H samples studied by 13C, 27Al and 29Si MAS NMR spectroscopy［J］. Cement and Concrete Research, 2015, 71: 56-65.

[38] [38] LIU X, FENG P, CAI Y, et al. Carbonation behavior of calcium silicate hydrate (C-S-H): its potential for CO2 capture［J］. Chemical Engineering Journal, 2022, 431: 134243.

[39] [39] BLACK L, GARBEV K, GEE I. Surface carbonation of synthetic C-S-H samples: a comparison between fresh and aged C-S-H using X-ray photoelectron spectroscopy［J］. Cement and Concrete Research, 2008, 38(6): 745-750.

[40] [40] GARBEV K, STEMMERMANN P, BLACK L, et al. Structural features of C-S-H (I) and its carbonation in air—a Raman spectroscopic study. Part I: fresh phases［J］. Journal of the American Ceramic Society, 2007, 90(3): 900-907.

[41] [41] WU B, YE G. Carbonation mechanism of different kind of CSH: rate and products［C］//Int. RILEM Conference on Materials, Systems and Structures in Civil Engineering 2016-Segment on Concrete with Supplementary Cementitious Materials. Rilem, 2016: 163-272.

[42] [42] SHAH V, SCRIVENER K, BHATTACHARJEE B, et al. Changes in microstructure characteristics of cement paste on carbonation［J］. Cement and Concrete Research, 2018, 109: 184-197.

[43] [43] KANGNI-FOLI E, POYET S, LE BESCOP P, et al. Carbonation of model cement pastes: the mineralogical origin of microstructural changes and shrinkage［J］. Cement and Concrete Research, 2021, 144: 106446.

[44] [44] LU B, HUO Z, XU Q, et al. Characteristics of CSH under carbonation and its effects on the hydration and microstructure of cement paste［J］. Construction and Building Materials, 2023, 364: 129952.

[45] [45] BERTOLA F, GASTALDI D, IRICO S, et al. Influence of the amount of calcium sulfate on physical/mineralogical properties and carbonation resistance of CSA-based cements［J］. Cement and Concrete Research, 2022, 151: 106634.

[48] [48] ZHANG D C, XU D Y, CHENG X, et al. Carbonation resistance of sulphoaluminate cement-based high performance concrete［J］. Journal of Wuhan University of Technology-Mater Sci Ed, 2009, 24(4): 663-666.

[51] [51] DUAN P, CHEN W, MA J, et al. Influence of layered double hydroxides on microstructure and carbonation resistance of sulphoaluminate cement concrete［J］. Construction and Building Materials, 2013, 48: 601-609.

[52] [52] BERNAL S A, NICOLAS R S, MYERS R J, et al. MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders［J］. Cement and Concrete Research, 2014, 57: 33-43.

[53] [53] GASTALDI D, BERTOLA F, CANONICO F, et al. A chemical/mineralogical investigation of the behavior of sulfoaluminate binders submitted to accelerated carbonation［J］. Cement and Concrete Research, 2018, 109: 30-41.

[55] [55] WINNEFELD F, BARLAG S. Calorimetric and thermogravimetric study on the influence of calcium sulfate on the hydration of ye’elimite［J］. Journal of Thermal Analysis and Calorimetry, 2010, 101(3): 949-957.

[56] [56] WINNEFELD F, LOTHENBACH B. Hydration of calcium sulfoaluminate cements—experimental findings and thermodynamic modelling［J］. Cement and Concrete Research, 2010, 40(8): 1239-1247.

[57] [57] TELESCA A, MARROCCOLI M, PACE M, et al. A hydration study of various calcium sulfoaluminate cements［J］. Cement and Concrete Composites, 2014, 53: 224-232.

[58] [58] IRICO S, GASTALDI D, CANONICO F, et al. Investigation of the microstructural evolution of calcium sulfoaluminate cements by thermoporometry［J］. Cement and Concrete Research, 2013, 53: 239-247.

[59] [59] BERNARDO G, TELESCA A, VALENTI G L. A porosimetric study of calcium sulfoaluminate cement pastes cured at early ages［J］. Cement and Concrete Research, 2006, 36(6): 1042-1047.

[60] [60] LI J, CHANG J. Effect of crystal/amorphous ratio on mechanical properties in a C4A3-C2S hydration system with or without gypsum addition［J］. Construction and Building Materials, 2019, 208: 36-45.

[61] [61] ZHANG L, GLASSER F P. Hydration of calcium sulfoaluminate cement at less than 24 h［J］. Advances in Cement Research, 2002, 14(4): 141-155.

[63] [63] SCHNEIDER M. The cement industry on the way to a low-carbon future［J］. Cement and Concrete Research, 2019, 124: 105792.

[64] [64] OZBAY E, ERDEMIR M, DURMUS H . Utilization and efficiency of ground granulated blast furnace slag on concrete properties： a review［J］. Construction and Building Materials, 2016, 105: 423-434.

[65] [65] MECHLING J M, LECOMTE A, ROUX A, et al. Sulfoaluminate cement behaviours in carbon dioxide, warm and moist environments［J］. Advances in Cement Research, 2014, 26(1): 52-61.

[66] [66] SEO J, KIM S, PARK S, et al. Carbonation of calcium sulfoaluminate cement blended with blast furnace slag［J］. Cement and Concrete Composites, 2021, 118: 103918.

[67] [67] GUO X, SHI H, HU W, et al. Durability and microstructure of CSA cement-based materials from MSWI fly ash［J］. Cement and Concrete Composites, 2014, 46: 26-31.

[68] [68] GUO X, SHI H. Calcium sulfoaluminate (CSA) blended cements［J］. Magazine of Concrete Research, 2016, 68(4): 208-215.

[69] [69] HE J, LONG G, MA K, et al. Influence of fly ash or slag on nucleation and growth of early hydration of cement［J］. Thermochimica Acta, 2021, 701: 178964.

[70] [70] CHEN H G, YANG J J. A new supplementary cementitious material: walnut shell ash［J］. Construction and Building Materials, 2023, 408: 133852.

[71] [71] PARK S. Simulating the carbonation of calcium sulfoaluminate cement blended with supplementary cementitious materials［J］. Journal of CO2 Utilization, 2020, 41: 101286.

[73] [73] CONSTANTINO V R L, PINNAVAIA T J. Basic properties of Mg2+1-xAl3+x layered double hydroxides intercalated by carbonate, hydroxide, chloride, and sulfate anions［J］. Inorganic Chemistry, 1995, 34(4): 883-892.

[74] [74] TAYLOR H F W. Cement chemistry［M］. 2nd ed. London: Thomas Telford, 1997.

[75] [75] MORANDEAU A E, WHITE C E. Role of magnesium-stabilized amorphous calcium carbonate in mitigating the extent of carbonation in alkali-activated slag［J］. Chemistry of Materials, 2015, 27(19): 6625-6634.

[78] [78] SEO J, YOON H N, KIM S, et al. Characterization of reactive MgO-modified calcium sulfoaluminate cements upon carbonation［J］. Cement and Concrete Research, 2021, 146: 106484.

[79] [79] CARSANA M, CANONICO F, BERTOLINI L. Corrosion resistance of steel embedded in sulfoaluminate-based binders［J］. Cement and Concrete Composites, 2018, 88: 211-219.

[80] [80] AFROUGHSABET V, BIOLZI L, MONTEIRO P J M, et al. Investigation of the mechanical and durability properties of sustainable high performance concrete based on calcium sulfoaluminate cement［J］. Journal of Building Engineering, 2021, 43: 102656.

[82] [82] ZHANG D, CAI X H, SHAO Y X. Carbonation curing of precast fly ash concrete［J］. Journal of Materials in Civil Engineering, 2016, 28(11): 04016127.

[83] [83] HAMEED R, SEO J, PARK S, et al. CO2 uptake and physicochemical properties of carbonation-cured ternary blend Portland cement-metakaolin-limestone pastes［J］. Materials, 2020, 13(20): E4656.

[85] [85] CHANG J, FANG Y F, SHANG X P. The role of β-C2S and γ-C2S in carbon capture and strength development［J］. Materials and Structures, 2016, 49(10): 4417-4424.

[86] [86] FANG Y F, CHANG J. Rapid hardening β-C2S mineral and microstructure changes activated by accelerated carbonation curing［J］. Journal of Thermal Analysis and Calorimetry, 2017, 129(2): 681-689.

[88] [88] SEO J, KIM S, YOON H N, et al. Effect of the molar ratio of calcium sulfate over ye’elimite on the reaction of CSA cement/slag blends under an accelerated carbonation condition［J］. Journal of Building Engineering, 2022, 46: 103785.

[89] [89] JANG J G, LEE H K. Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement［J］. Cement and Concrete Research, 2016, 82: 50-57.

[90] [90] MO L W, ZHANG F, DENG M. Mechanical performance and microstructure of the calcium carbonate binders produced by carbonating steel slag paste under CO2 curing［J］. Cement and Concrete Research, 2016, 88: 217-226.

[91] [91] ZHANG D, GHOULEH Z, SHAO Y X. Review on carbonation curing of cement-based materials［J］. Journal of CO2 Utilization, 2017, 21: 119-131.

[92] [92] SHARMA R, KIM H, LEE N K, et al. Microstructural characteristics and CO2 uptake of calcium sulfoaluminate cement by carbonation curing at different water-to-cement ratios［J］. Cement and Concrete Research, 2023, 163: 107012.

[93] [93] HUET B, TASOTI V, KHALFALLAH I. A review of Portland cement carbonation mechanisms in CO2 rich environment［J］. Energy Procedia, 2011, 4: 5275-5282.

[94] [94] ROSTAMI V, SHAO Y X, BOYD A J. Carbonation curing versus steam curing for precast concrete production［J］. Journal of Materials in Civil Engineering, 2012, 24(9): 1221-1229.