[1] [1] FENG L, LI S, LI Y, et al.. Super-hydrophobic surfaces: from natural to artificial ［J］. Advanced Materials, 2002, 14(24): 1857-1860.

[2] [2] WANG J M, WANG K, ZHENG Y M, et al.. Effects of chemical composition and nano-structures on the wetting behaviour of lotus leaves ［J］. Chemical Journal of Chinese Universities, 2010, 31(8): 1596-1599. (in Chinese)

[3] [3] YEO J, RYU J, LEE B K, et al.. Theoretical and experimental characterization of wettability of various nanolens arrayed polymer surfaces replicated with nanodimpled aluminum mold insert ［J］. Microsystem Technologies, 2010, 16(8-9): 1425-1430.

[4] [4] JIANG B Y, SHEN R X, SHEN L J, et al.. Influence of processing parameters in injection molding on replication fidelity of microstructure parts ［J］. Opt. Precision Eng., 2008, 16(2): 248-256. (in Chinese)

[5] [5] SCHIFT H. Nanoimprint lithography: an old story in modern times A review ［J］. Journal of Vacuum Science & Technology B, 2008, 26(2): 458-480.

[6] [6] XU B, WANG J ZH, LV ZH B, et al.. Effect of processing parameters on warpage of flat miro-mini parts in injection molding ［J］. Opt. Precision Eng., 2013, 21(7): 1825-1830. (in Chinese)

[7] [7] LIN H Y, CHANG C H, YOUNG W B. Experimental and analytical study on filling of nano structures in micro injection molding ［J］. International Communications in Heat and Mass Transfer, 2010, 37(10): 1477-1486.

[8] [8] HATTORI S, NAGATO K, HAMAGUCHI T, et al.. Rapid injection molding of high-aspect-ratio nanostructures ［J］. Microelectronic Engineering, 2010, 87(5):1546-1549.

[9] [9] MATSCHUK M, LARSEN N B. Injection molding of high aspect ratio sub-100 nm nanostructures ［J］. Journal of Micromechanics and Microengineering, 2013, 23(2): 025003.

[10] [10] MIKKELSEN M B, LETAILLEUR A A, SONDERGARD E, et al.. All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp ［J］. Lab on a Chip, 2012, 12(2): 262-267.

[11] [11] MASUDA H, FUKUDA K. Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina ［J］. Science, 1995, 268(5216): 1466-1468.

[12] [12] ZHANG ZH, XU ZH M, SUN T Y, et al.. Study on porous silicon template for nanoimprint lithography ［J］. Acta Physica Sinica, 2014, 63(1): 18102-1-8. (in Chinese)

[13] [13] CHOI M K, YOON H, LEE K, et al.. Simple fabrication of asymmetric high-aspect-ratio polymer nanopillars by reusable AAO templates ［J］. Langmuir, 2011, 27(6): 2132-2137.

[14] [14] HE T, ZHANG L, DENG W. Designing polystyrene honeycomb-like microstructure with high water adhesion ［J］. Materials Chemistry and Physics, 2011, 131(1): 23-26.

[15] [15] WANG J, ZHOU W, ZHANG J, et al.. High-fidelity replica molding for large-area PMMA 3D nanostructures with high performance surface-enhanced Raman scattering and hydrophobicity ［J］. Microelectronic Engineering, 2014, 115: 2-5.

[16] [16] MIIKKULAINEN V, RASILAINEN T, PUUKIL AINEN E, et al.. Atomic layer deposition as pore diameter adjustment tool for nanoporous aluminum oxide injection molding masks ［J］. Langmuir, 2008, 24(9): 4473-4477.

[17] [17] YOO Y E, KIM T H, CHOI D S, et al.. Injection molding of a nanostructured plate and measurement of its surface properties ［J］. Current Applied Physics, 2009, 9(2): 12-18.

[18] [18] PARK J M. Fabrication of various nano-structured nickel stamps using anodic aluminum oxide ［J］. Microsystem Technologies, 2014: 1-7.

[19] [19] LIN X L, PANG Y CH, FENG J. Fabricating Polypropylene Superhydrophobic Surface by Thermal Microreplica Molding ［J］. Guangzhou Chemical Industry, 2013, 41(12): 112-113. (in Chinese)