[1] [1] ZHANG J M, TIAN X, CHEN W, et al. Measuring environmental impacts from primary and secondary copper production under the upgraded technologies in key Chinese enterprises[J]. Environ Impact Asses, 2022(9): 106855.1-106855.9.

[3] [3] GREGUREK D, MAJCENOVIC C, SPANRING A, et al. Forsterite bursting in magnesia chromite bricks-two case studies fromlead and copper smelting furnaces[J]. Mater Sci, 2011(2): 49-53.

[5] [5] PREZ I, MORENO-VENTAS I, ROS G. Post-mortem study of magnesia-chromite refractory used in Peirce-Smith Converter for copper-making process, supported by thermochemical calculations[J]. Ceram Int, 2018, 44(12): 13476-13486.

[9] [9] GREGUREK D, SCHMIDL J, REINHARTER K, et al. Copper anode furnace: Chemical, mineralogical and thermo-chemical considerations of refractory wear mechanisms[J]. JOM, 2018, 70(11): 2428-2434.

[10] [10] PREZ I, MORENO-VENTAS I, ROS G. Fundamentals of the refractory wear in an industrial anode furnace used in the copper-making process[J]. Ceram Int, 2019, 45(8): 9788-9798.

[11] [11] PREZ I, MORENO-VENTAS I, ROS G. Study of the refractory used in a submerged arc furnace in the copper-making industry[J]. Int J Appl Ceram Technol, 2020, 17(2): 625-636.

[12] [12] JIN E D, DING D H, ZHANG N X, et al. Regulating the pore structure of periclase refractories by adding Y2O3 to enhance corrosion resistance for copper slag[J]. J Am Ceram Soc, 2024, 107(5): 3146-3158.

[15] [15] LIU G F, LI Y W, ZHU T B, et al. Influence of the atmosphere on the mechanical properties and slag resistance of magnesia-chrome bricks[J]. Ceram Int, 2020, 46(8): 11225-11231.

[17] [17] HOU X, DING D H, XIAO G Q, et al. Corrosion mechanism of magnesia-chrome refractory bricks with FetO-SiO2-Cr2O3 copper converter slag [J]. Ceram Int, 2023, 49(10): 15395-15401.

[19] [19] PREZ I, MORENO-VENTAS I, PARRA R, et al. Post-mortem study of magnesia-chromite refractory used in the gas area of a Submerged Arc Furnace for the copper-making process[J]. Boletn De La Soc Espaola De Cermica Y Vidrio, 2019, 58(4): 178-188.

[21] [21] XU L, CHEN M, WANG N, et al. Chemical wear mechanism of magnesia-chromite refractory for an oxygen bottom-blown copper-smelting furnace: A post-mortem analysis[J]. Ceram Int, 2021, 47(2): 2908-2915.

[24] [24] PETKOV V, JONES P T, JONES, E et al. Chemical corrosion mechanisms of magnesia-chromite and chrome-free refractory bricks by copper metal and anode slag[J]. J Eur Ceram Soc, 2007: 2433-2444.

[25] [25] YU Z Q, LIU Z H, YE F C, et al. Corrosion mechanism of magnesia-chrome and alumina-chrome refractories in E-scrap smelting[J]. Ceram Inter, 2022, 48(2): 2693-2703.

[26] [26] GAO J H, SU W G, WANG X, et al. Corrosion and degradation mechanisms of high chromia refractory bricks in an entrained-flow gasifier: Experimental and numerical analysis[J]. J Mater Res Technol, 2023.

[27] [27] MALFLIET A, LOTFIAN S, SCHEUNIS L, et al. Degradation mechanisms and use of refractory linings in copper production processes: A critical review[J]. J Eur Ceram Soc, 2014, 34(3): 849-876.

[28] [28] LIOW J L, TSIRIKIS P, GRAYNB. Study of Refractory Wear in the Tuyere Region of a Peirce-Smith Nickel Convertor[J]. Can Metall Quart, 1998: 99-117.

[31] [31] CHEN M, CUI Z X, WEI C D, et al. Degradation mechanisms of refractories in a bottom blown copper smelting furnace[M]//The Minerals, Metals & Materials Series. Cham: Springer International Publishing, 2018: 149-157.

[34] [34] LIU W, WANG L, MA B Z, et al. Reactions between magnesia-chrome refractories and copper converter slags: Corrosion behavior and prevention by Fe-rich layer formation[J]. Ceram Int, 2022, 48(10): 14813-14824.