[1] [1] HAN X S．Investigation atomic level micromechanism about tool wear in the case of nanometric cutting using molecular dynamics method［J］．Chinese Journal of Mechanical Engineering，2007，43(9)：107-112．(in Chinese)

[2] [2] WANG D ZH，HAN R D，LIU H M，et al.．Wear model and characteristics between cutting tool and chips in ultraprecision machining of SiC reinforced aluminum composites［J］．Tribology，2005，25(6)：569-573．(in Chinese)

[3] [3] CARRILERO M S，BIENVENIDO R，SNCHEZ J M．A SEM and EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al–Cu alloy［J］．International Journal of Machine Tools and Manufacture，2002，42(2)：215-220．

[4] [4] KIM J D,MARINOV V R,KIM D S．Built-up edge analysis of orthogonal cutting by the visco-plastic finite-element method［J］．Journal of Materials Processing Technology，1997，71(3)：367-372．

[5] [5] MANNA A,BHATTACHARAYYA B．A study on machinability of Al/SiC-MMC［J］．Journal of Materials Processing Technology，2003，140：711-716．

[6] [6] MENG Q，ARSECULARATNE J A，MATHEW P．Calculation of optimum cutting conditions for turning operations using a machining theory［J］．International Journal of Machine Tools & Manufacture，2000，40：1709-1733．

[7] [7] OZCATABLBAS Y．Chip and built-up edge formation in the machining of in situ Al4C3-Al composite［J］．Materials & Design，2003，24(3)：215-221．

[8] [8] AKASAWA T，FUKUDA I，NAKAMURA K，et al.．Effect of microstructure and hardness on the machinability of medium-carbon chrome-molybdenum steel［J］．Journal of Materials Processing Technology，2004，153-154：48-53．

[9] [9] KIM J D，KANG Y H．High-speed machining of aluminium using diamond endmills［J］．International Journal of Machine Tools & Manufacture，1997，37：1155-1165．

[10] [10] SANCHEZ J M，RUBIO E，LVAREZ M，et al.．Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys ［J］．Journal of Materials Processing Technology，2005，164-165：911-918．

[11] [11] ARSECULARATNE J A，FOWLE R F，MATHEW P．Nose radius oblique tool: cutting force and built-up edge prediction［J］．Journal of Materials Processing Technology，2005，164-165：911-918．

[12] [12] FANG N，DEWHURST P．Slip-line modeling of built-up edge formation in machining［J］．International Journal of Mechanical Sciences，2005，47(7)：1079-1098．