[1] [1] HU D J J, HUMBERT G, DONG H, et al. Review of specialty fiber based Brillouin optical time domain analysis technology[J]. Photonics, 2021, 8(10): 421.

[2] [2] FENG T, ZHOU J, SHANG Y, et al. Distributed trans-verse-force sensing along a single-mode fiber using po-larization-analyzing OFDR[J]. Optics express, 2020, 28(21): 31253-31271.

[3] [3] GU K, SHI B, LIU C, et al. Investigation of land subsi-dence with the combination of distributed fiber optic sensing techniques and microstructure analysis of soils[J]. Engineering geology, 2018, 240: 34-47.

[4] [4] DONG Y. High-performance distributed Brillouin opti-cal fiber sensing[J]. Photonic sensors, 2021, 11(1): 22.

[5] [5] LIU Y, LI H, WANG Y, et al. Damage detection of tun-nel based on the high-density cross-sectional curvature obtained using strain data from BOTDA sensors[J]. Mechanical systems and signal processing, 2021, 158(3): 107728.

[6] [6] LI H, LIU Y, CAO J, et al. Investigation of the BOTDA technology for structural condition monitoring of urban tunnel[J]. IOP conference series: materials science and engineering, 2019, 603(4): 042003.

[7] [7] HU T, HOU G, LI Z. The field monitoring experiment of the roof strata movement in coal mining based on DFOS[J]. Sensors, 2020, 20(5): 1318.

[8] [8] LI Y Q, AN Q, ZHANG L X, et al. High-accuracy Bril-louin frequency shift measurement system based on stimulated Brillouin scattering phase shift[J]. Optical engineering, 2017, 56(5): 056102.

[9] [9] SHEN L, HAO W, ZHAO C, et al. Distributed curva-ture sensing based on a bending loss-resistant ring-core fiber[J]. Photonics research, 2020, 8(2): 10.

[10] [10] ZHANG L X, LI Y Q, TIAN M, et al. Performance improvement method of single-ended BOTDA system based on Fresnel reflection[J]. Optoelectronics letters, 2022, 18(3): 170-174.

[11] [11] ZUO M Q, GE D W, LIU J X, et al. Long-haul inter-modal-MIMO-free MDM transmission based on a weakly coupled multiple-ring-core few-mode fiber[J]. Optics express, 2022, 30(4): 5868-5878.

[12] [12] GUPTA R, KALER R S. Nonlinear Kerr and intermodal four-wave mixing effect in mode-division multiplexed multimode fiber link[J]. Optical engineering, 2019, 58(03): 036108.

[13] [13] SONG K Y, KIM Y H. Characterization of stimulated Brillouin scattering in a few-mode fiber[J]. Optics let-ters, 2013, 38(22): 4841.

[14] [14] ZHANG Y J, GAO H L, FU X H, et al. Characterization of Brillouin scattering in a few-mode fiber[J]. Acta physica sinica, 2017, 66(2): 7.

[15] [15] LI Y Q, LI X J, AN Q, et al. New method to improve the performance of Brillouin optical time domain re-flectometer system[J]. Acta optica sinica, 2015, 35(01):69-78.

[16] [16] EZNAVEH Z S, LOPEZ J E A, ZACARIAS J C A, et al. All-fiber few-mode multicore photonic lantern mode multiplexer[J]. Optics express, 2017, 25(14): 16701-16707.

[17] [17] WANG Y, ZHANG C, FU S, et al. Design of ellipti-cal-core five-mode group selective photonic lantern over the C-band[J]. Optics express, 2019, 27(20): 27979-27990.

[18] [18] LI Y Q, ZHAO X, ZHAO L J, et al. Brillouin scattering parameters of different modes in multimode optical fibers[J]. Acta photonica sinica, 2015, 44(3): 27-33.

[19] [19] LI Y Q, FAN H J, ZHANG L X, et al. Single-mode input fiber combined with multimode sensing fiber used in Brillouin optical time-domain reflectometry[J]. Photonics, 2022, 9(6): 398.

[20] [20] LI A, WANG Y F, FANG J, et al. Few-mode fiber multi-parameter sensor with distributed temperature and strain discrimination[J]. Optics letters, 2015, 40(7): 12722-12732.

[21] [21] WU H, WANG R, LIU D, et al. Few-mode fiber based distributed curvature sensor through quasi-single-mode Brillouin frequency shift[J]. Optics letters, 2016, 41(7): 1514-1517.

[22] [22] WU H, TANG M. Few-mode optical fiber based simul-taneously distributed curvature and temperature sens-ing[J]. Optics express, 2017, 25(11): 12722.