[1] [1] Yuan G J, Zhang X C, Chen B, Tu S T and Zhang C C 2020 Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach J. Mater. Sci. Technol. 38 28–38

[2] [2] Li S C, Xiao G J, Zhuo X Q, Chen B Q, Zhao Z Y and Huang Y 2023 Fatigue performance and failure mechanism of ultrasonic-assisted abrasive-belt-ground Inconel 718 Int.J. Fatigue 168 107406

[3] [3] de Bartolomeis A, Newman S T, Jawahir I S, Biermann D and Shokrani A 2021 Future research directions in the machining of Inconel 718 J. Mater. Process. Technol.297 117260

[4] [4] Sreenivasa Rao M, Venkata Naresh Babu A and Venkaiah N 2018 Modified flower pollination algorithm to optimize WEDM parameters while machining Inconel-690 alloy Mater. Today 5 7864–72

[5] [5] Sun G Y, Zhao L L, Ma Z and Zhao Q L 2018 Force prediction model considering material removal mechanism for axial ultrasonic vibration-assisted peripheral grinding of Zerodur Int. J. Adv. Manuf. Technol. 98 2775–89

[6] [6] Liao Z R, Xu D D, Luna G G, Axinte D, Augustinavicius G,Sarasua J A and Wretland A 2021 Influence of surface integrity induced by multiple machining processes upon the fatigue performance of a nickel based superalloy J. Mater.Process. Technol. 298 117313

[7] [7] Teti R, Jemielniak K, O’Donnell G and Dornfeld D 2010 Advanced monitoring of machining operations CIRP Ann.59 717–39

[8] [8] Chen H T, Liu Z B, Wang X B, Wang Y and Liu S Y 2022 Effect of surface integrity on fatigue life of 2024 aluminum alloy subjected to turning J. Manuf. Process. 83 650–66

[9] [9] Chauhan S and Muthulingam S 2023 Fatigue life estimation of TMT reinforcing steel bar considering pitting corrosion and high temperature impacted surface topography Int. J.Fatigue 175 107810

[10] [10] Stopka K S, Yaghoobi M, Allison J E and McDowell D L 2023 Microstructure-Sensitive modeling of surface roughness and notch effects on extreme value fatigue response Int. J.Fatigue 166 107295

[11] [11] Klotz T, Delbergue D, Bocher P, Lévesque M and Brochu M 2018 Surface characteristics and fatigue behavior of shot peened Inconel 718 Int. J. Fatigue 110 10–21

[12] [12] He C L, Yan J W, Wang S Q, Zhang S, Chen G and Ren C Z 2023 A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials Int. J. Extrem. Manuf. 5 035102

[13] [13] Chiocca A, Frendo F, Aiello F and Bertini L 2022 Influence of residual stresses on the fatigue life of welded joints. Numerical simulation and experimental tests Int. J. Fatigue162 106901

[14] [14] Schubnell J, Pontner P, Wimpory R C, Farajian M and Schulze V 2020 The influence of work hardening and residual stresses on the fatigue behavior of high frequency mechanical impact treated surface layers Int. J. Fatigue 134 105450

[15] [15] Samadi F, Mourya J, Wheatley G, Nizam Khan M, Masoudi Nejad R, Branco R and Macek W 2022 An investigation on residual stress and fatigue life assessment of T-shape welded joints Eng. Fail. Anal. 141 106685

[16] [16] Suárez A, Veiga F, de Lacalle L N L, Polvorosa R, Lutze S and Wretland A 2016 Effects of ultrasonics-assisted face milling on surface integrity and fatigue life of Ni-alloy 718 J. Mater. Eng. Perform. 25 5076–86

[17] [17] Li X, Wang Y X, Xu R F, Yang S L, Guan C M and Zhou Y X 2019 Influence of surface integrity on fatigue behavior of Inconel 718 and Ti6Al4V workpieces with CBN electroplated wheel Int. J. Adv. Manuf. Technol.102 2345–56

[18] [18] Han L, Kang R K, Zhang Y, Dong Z G and Bao Y 2021 Research on surface integrity of GH4169 machined by ultrasonic assisted grinding Diam. Abras. Eng. 41 46–51

[19] [19] Zong L, Liu H, Ding Y and Cui Y 2024 Experimental and numerical study on fatigue damage evolution of Q690D welding details J. Constr. Steel Res. 212 108264

[20] [20] Lopes J P and Malcher L 2017 Fatigue life estimates under non-proportional loading through continuum damage evolution law Theor. Appl. Fract. Mech. 88 64–73

[21] [21] Li W Y, Yu Y, Li X Z, Wang L and Xu J Q 2023 Quantitative characterization of material uniformity and fatigue life reliability based on the initial damage discreteness Int. J.Fatigue 167 107382

[22] [22] Liu Y B, Li Y D, Li S X, Yang Z G, Chen S M, Hui W J and Weng Y Q 2010 Prediction of the S–N curves of high-strength steels in the very high cycle fatigue regime Int. J. Fatigue 32 1351–7

[23] [23] Zhao Y X, Yang B, Feng M F and Wang H 2009 Probabilistic fatigue S–N curves including the super-long life regime of a railway axle steel Int. J. Fatigue 31 1550–8

[24] [24] Remes H, Korhonen E, Lehto P, Romanoff J, Niemel? A,Hiltunen P and Kontkanen T 2013 Influence of surface integrity on the fatigue strength of high-strength steels J.Constr. Steel Res. 89 21–29

[25] [25] Cai X J and Xu J Q 2015 A quantitative relationship of high cycle fatigue limit with mean stresses Eng. Mech. 32 25–30

[26] [26] Choi Y 2015 Influence of feed rate on surface integrity and fatigue performance of machined surfaces Int. J. Fatigue78 46–52

[27] [27] Hu B R, Liu J Z and Chen J F 2007 Relationship between fatigue notch factor Kf and stress concentration factor Kt J.Mater. Eng. 25 70–73

[28] [28] Neuber H 1961 Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain law J. Appl. Mech. 28 544–50

[29] [29] Peterson R E 1959 Notch sensitivity Metal Fatigue ed G Sines and J L Waisman (McGraw-Hill) pp 290–306

[30] [30] Sutherland H J and Mandell J F 2005 Optimized constant-life diagram for the analysis of fiberglass composites used in wind turbine blades J. Sol. Energy Eng. 127 563–9

[31] [31] Sui S, Chew Y, Weng F, Tan C L, Du Z L and Bi G J 2022 Study of the intrinsic mechanisms of nickel additive for grain refinement and strength enhancement of laser aided additively manufactured Ti-6Al-4V Int. J. Extrem. Manuf.4 035102

[32] [32] Dong Z G, Xu N W, Zhang Y, Han L, Kang R K, Wu X F and Wang Y 2022 Mechanism of gradient strengthening layer formation based on microstructure and microhardness of Inconel 718 grinding surface Int. J. Adv. Manuf. Technol.120 2363–72

[33] [33] Zhang P, Li S X and Zhang Z F 2011 General relationship between strength and hardness Mater. Sci. Eng. A 529 62–73

[34] [34] Ren X P and Liu Z Q 2016 Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718 Int. J. Adv. Manuf. Technol. 86 2319–27

[35] [35] Hou S Q, Cai X J and Xu J Q 2015 A life evaluation formula for high cycle fatigue under uniaxial and multiaxial loadings with mean stresses Int. J. Mech. Sci. 93 229–39

[36] [36] Zhong L Q, Hu H, Liang Y L and Huang C W 2019 High cycle fatigue performance of Inconel 718 alloys with different strengths at room temperature Metals 9 13

[37] [37] Xu L and Lei X S 2021 Experimental study on mechanical properties of GH4169 superalloy Mach. Build. Autom.50 32–34

[38] [38] Wang J J, Wen Z X, Zhang X H, Zhao Y C and Yue Z F 2019 Effect mechanism and equivalent model of surface roughness on fatigue behavior of nickel-based single crystal superalloy Int. J. Fatigue 125 101–11

[39] [39] Li X K, Wolf S, Zhi G and Rong Y M 2014 The modelling and experimental verification of the grinding wheel topographical properties based on the ‘through-the-process’ method Int. J. Adv. Manuf. Technol. 70 649–59

[40] [40] Chen S Q, Zhao W X, Yan P, Qiu T Y, Gu H Q, Jiao L and Wang X B 2022 Effect of milling surface topography and texture direction on fatigue behavior of ZK61M magnesium alloy Int. J. Fatigue 156 106669

[41] [41] Yang Z C, Zhu L D, Zhang G X, Ni C B and Lin B 2020 Review of ultrasonic vibration-assisted machining in advanced materials Int. J. Mach. Tools Manuf. 156 103594

[42] [42] Chirita B and Tampu N C 2014 Study of residual stresses distribution generated from milling of magnesium alloy parts Appl. Mech. Mater. 657 18–22

[43] [43] Fleury R M N and Nowell D 2017 Evaluating the influence of residual stresses and surface damage on fatigue life of nickel superalloys Int. J. Fatigue 105 27–33

[44] [44] Wen J, Tang J Y and Zhou W H 2021 Study on formation mechanism and regularity of residual stress in ultrasonic vibration grinding of high strength alloy steel J. Manuf.Process. 66 608–22

[45] [45] Yang M et al 2023 Temperature field model in surface grinding: a comparative assessment Int. J. Extrem. Manuf.5 042011

[46] [46] Feng L and Xuan F Z 2015 Release and redistribution of residual stress in the welded turbine rotor under service-type loadings Nucl. Eng. Des. 295 500–10

[47] [47] Dornfeld D, Min S and Takeuchi Y 2006 Recent advances in mechanical micromachining CIRP Ann. 55 745–68

[48] [48] Herasymchuk O M 2015 Microstructurally-dependent model for predicting the kinetics of physically small and long fatigue crack growth Int. J. Fatigue 81 148–61