International Journal of Extreme Manufacturing, Volume. 5, Issue 1, 12001(2023)

Review of the structure and performance of through-holed anodes and cathodes prepared with a picosecond pulsed laser for lithium-ion batteries

[in Chinese]1,*... [in Chinese]1, [in Chinese]2, [in Chinese]2, [in Chinese]3 and [in Chinese]4 |Show fewer author(s)
Author Affiliations
  • 1Department of Material and Life Chemistry, Faculty of Engineering, Kanagawa University, 3-27-1 Rokkakubashi, kanagawa-ku, Yokohama 221-8686, Japan
  • 2Department of Electrical and Electronic Systems Engineering, National Institute of Technology, Nagaoka College, 888 Nishikatakai, Nagaoka, Niigata 940-8532, Japan
  • 3Research Institute for Engineering, Kanagawa University, 3-27-1, Rokkakubashi, Kanagawa-ku, Yokohama, Kanagawa 221-8686, Japan
  • 4Wired Co., Ltd, 1628 Hitotsuyashiki Shinden, Sanjo, Niigata 959-1152, Japan
  • show less
    References(47)

    [1] [1] Zubi G, Dufo-López R, Carvalho M and Pasaoglu G 2018 The lithium-ion battery: state of the art and future perspectives Renew. Sustain. Energy Rev. 89 292–308

    [2] [2] Broussely M and Archdale G 2004 Li-ion batteries and portable power source prospects for the next 5–10 years J. Power Sources 136 386–94

    [3] [3] Hannan M A, Hoque M M, Mohamed A and Ayob A 2017 Review of energy storage systems for electric vehicle applications: issues and challenges Renew. Sustain. Energy Rev. 69 771–89

    [4] [4] Wagner F T, Lakshmanan B and Mathias M F 2010 Electrochemistry and the future of the automobile J. Phys. Chem. Lett. 1 2204–19

    [5] [5] Goodenough J B and Kim Y 2010 Challenges for rechargeable Li batteries Chem. Mater. 22 587–603

    [6] [6] Tarascon J M and Armand M 2001 Issues and challenges facing rechargeable lithium batteries Nature 414 359–67

    [7] [7] Li W D, Song B H and Manthiram A 2017 High-voltage positive electrode materials for lithium-ion batteries Chem. Soc. Rev. 46 3006–59

    [8] [8] ShiJL,QiR,ZhangXD,WangPF, FuWG,YinYX, XuJ, Wan L J and Guo Y G 2017 High-thermal-and air-stability cathode material with concentration-gradient buffer for Li-ion batteries ACS Appl. Mater. Interfaces 9 42829–35

    [9] [9] Liu K, Liu Y Y, Lin D C, Pei A and Cui Y 2018 Materials for lithium-ion battery safety Sci. Adv. 4 eaas9820

    [10] [10] Cabana J, Kwon B J and Hu L H 2018 Mechanisms of degradation and strategies for the stabilization of cathode-electrolyte interfaces in Li-ion batteries Acc. Chem. Res. 51 299–308

    [11] [11] Wang J H, Yamada Y, Sodeyama K, Watanabe E, Takada K, Tateyama Y and Yamada A 2018 Fire-extinguishing organic electrolytes for safe batteries Nat. Energy 3 22–29

    [12] [12] Zhang Z F, Chen Z L, Zhang X H, Li Y T, Zhang Q G, Hart J and Li J 2016 High capacity and high power NCM/graphite lithium ion battery using expanded metal current collectors ECS J. Solid State Sci. Technol. 5 Q3088–94

    [13] [13] Roberts M et al 2011 3D lithium ion batteries—from fundamentals to fabrication J. Mater. Chem. 21 9876–90

    [14] [14] Pfleging W 2018 A review of laser electrode processing for development and manufacturing of lithium-ion batteries Nanophotonics 7 549–73

    [15] [15] Pfleging W and Pr.ll J 2014 A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries J. Mater. Chem. A 2 14918–26

    [16] [16] Yang Y, Yuan W, Zhang X Q, Yuan Y H, Wang C, Ye Y T, Huang Y, Qiu Z Q and Tang Y 2020 Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries Appl. Energy 257 114002

    [17] [17] WangM,LeAV, ShiY, NoelleDJ,Wu DG,Fan J,LuWY and Qiao Y 2017 Sigmoidal current collector for lithium-ion battery J. Appl. Phys. 121 015303

    [18] [18] Priim.gi P, Brandell D, Srivastav S, Aabloo A, Kasem.gi H and Zadin V 2016 Optimizing the design of 3D-pillar microbatteries using finite element modelling Electrochim. Acta 209 138–48

    [19] [19] Cui L F, Hu L B, Choi J W and Cui Y 2010 Light-weight free-standing carbon nanotube-silicon films for anodes of lithium ion batteries ACS Nano 4 3671–8

    [20] [20] Baumeister M and Fleischer J 2014 Integrated cut and place module for high productive manufacturing of lithium-ion cells CIRP Ann. 63 5–8

    [21] [21] Grabmann S, Kriegler J, Harst F, Günter F J and Zaeh M F 2022 Laser welding of current collector foil stacks in battery production–mechanical properties of joints welded with a green high-power disk laser Int. J. Adv. Manuf. Technol. 118 2571–86

    [22] [22] Das A, Beaumont R, Masters I and Haney P 2021 Macro-modelling of laser micro-joints for understanding joint strength in electric vehicle battery interconnects Materials 14 3552

    [23] [23] Proell J, Kohler R, Mangang A, Ulrich S, Ziebert C and Pfleging W 2012 3D structures in battery materials J. Laser Micro Nanoeng. 7 97–104

    [24] [24] Park J, Jeon C, Kim W, Bong S J, Jeong S and Kim H J 2021 Challenges, laser processing and electrochemical characteristics on application of ultra-thick electrode for high-energy lithium-ion battery J. Power Sources 482 228948

    [25] [25] S.mann C, Kelesiadou K, Hosseinioun S S, Wachtler M, K.hler J R, Birke K P, Schubert M B and Werner J H 2018 Laser porosificated silicon anodes for lithium ion batteries Adv. Energy Mater. 8 1701705

    [26] [26] Zheng Y, Seifert H J, Shi H, Zhang Y, Kübel C and Pfleging W 2019 3D silicon/graphite composite electrodes for high-energy lithium-ion batteries Electrochim. Acta 317 502–8

    [27] [27] De Lauri V, Krumbein L, Hein S, Prifling B, Schmidt V, Danner T and Latz A 2021 Beneficial effects of three-dimensional structured electrodes for the fast charging of lithium-ion batteries ACS Appl. Energy Mater 4 13847–59

    [28] [28] Tsuda T et al 2018 Improvement of high-rate charging/discharging performance of a lithium ion battery composed of laminated LiFePO4 cathodes/ graphite anodes having porous electrode structures fabricated with a pico-second pulsed laser Electrochim. Acta 291 267–77

    [29] [29] Tsuda T et al 2019 Improvement of high-rate performance of LiFePO4 cathode with through-holed LiFePO4/activated carbon hybrid electrode structure fabricated with a pico-second pulsed laser Electrochim. Acta 298 827–34

    [30] [30] Tsuda T, Ando N, Mitsuhashi N, Tanabe T, Itagaki K, Soma N, Nakamura S, Hayashi N and Matsumoto F 2017 Fabrication of porous electrodes with a picosecond pulsed laser and improvement of the rate performance of a porous graphite anode and LiFePO4 cathode ECS Trans. 80 1391–7

    [31] [31] Yamada M, Tsuta M, Nakamura S, Ando N, Soma N, Gunji T and Matsumoto F 2022 Structure and performance of through-holed electrodes prepared with a pico-second pulsed laser for lithium-ion battery J. Surf. Finish. Soc. Japan 73 195–200

    [32] [32] Wang B, Al Abdulla W, Wang D L and Zhao X S 2015 A three-dimensional porous LiFePO4 cathode material modified with a nitrogen-doped graphene aerogel for high-power lithium ion batteries Energy Environ. Sci. 8 869–75

    [33] [33] Wang B, Xie Y, Liu T, Luo H, Wang B, Wang C H, Wang L, Wang D L, Dou S X and Zhou Y 2017 LiFePO4 quantum-dots composite synthesized by a general microreactor strategy for ultra-high-rate lithium ion batteries Nano Energy 42 363–72

    [34] [34] Tsuda T, Ando N, Mitsuhashi N, Tanabe T, Itagaki K, Soma N, Nakamura S, Hayashi N and Matsumoto F 2018 Relationship between hole design on anode electrode, the reaction temperature and the rate of Li+ ion pre-doping reaction to porous laminated graphite anodes Electrochemistry 86 10–18

    [35] [35] Ferrari A C 2007 Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects Solid State Commun. 143 47–57

    [36] [36] Chandrasiri K W D K, Nguyen C C, Zhang Y Z, Parimalam B S and Lucht B L 2017 Systematic investigation of alkali metal ions as additives for graphite anode in propylene carbonate based electrolytes Electrochim. Acta 250 285–91

    [37] [37] Teichert P, Eshetu G G, Jahnke H and Figgemeier E 2020 Degradation and aging routes of Ni-rich cathode based Li-ion batteries Batteries 6 8

    [38] [38] Tsuda T, Ando N, Nakamura S, Ishihara Y, Hayashi N, Soma N, Gunji T, Tanabe T, Ohsaka T and Matsumoto F 2019 Improvement of high-rate discharging performance of LiFePO4 cathodes by forming micrometer-sized through-holed electrode structures with a pico-second pulsed laser Electrochim. Acta 296 27–38

    [39] [39] Tsuda T, Ishihara Y, Watanabe T, Ando N, Gunji T, Soma N, Nakamura S, Hayashi N, Ohsaka T and Matsumoto F 2019 An improved high-rate discharging performance of ‘unbalanced’ LiFePO4 cathodes with different LiFePO4 loadings by a grid-patterned micrometer size-holed electrode structuring Electrochemistry 87 370–8

    [40] [40] Tsuda T, Ando N, Gunji T, Tanabe T, Kaneko S, Itagaki K, Soma N, Nakamura S and Matsumoto F 2017 Improvement of rate performance of LiFePO4 cathode with porous LiFePO4/activated carbon hybrid electrode structure Electrochemistry 85 447–50

    [41] [41] Holtstiege F, Koco, T, Hundehege T, Siozios V, Winter M and Placke T 2018 Toward high power batteries: pre-lithiated carbon nanospheres as high rate anode material for lithium ion batteries ACS Appl. Energy Mater. 1 4321–31

    [42] [42] Hu B et al 2019 Understanding of pre-lithiation of poly(acrylic acid) binder: striking the balances between the cycling performance and slurry stability for silicon-graphite composite electrodes in Li-ion batteries J. Power Sources 416 125–31

    [43] [43] Verma P, Maire P and Novák P 2010 A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries Electrochim. Acta 55 6332–41

    [44] [44] Saito M, Kato K, Ishii S, Yoshii K, Shikano M, Sakaebe H, Kiuchi H, Fukunaga T and Matsubara E 2019 Effective bulk activation and interphase stabilization of silicon negative electrode by lithium pre-doping for next-generation batteries J. Electrochem. Soc. 166 A5174–83

    [45] [45] Watanabe T, Tsuda T, Ando N, Nakamura S, Hayashi N, Soma N, Gunji T, Ohsaka T and Matsumoto F 2019 An improved pre-lithiation of graphite anodes using through-holed cathode and anode electrodes in a laminated lithium ion battery Electrochim. Acta 324 134848

    [46] [46] Tsuda T, Ando N, Mitsuhashi N, Tanabe T, Itagaki K, Soma N, Nakamura S, Hayashi N and Matsumoto F 2017 Fabrication of porous graphite anodes with pico-second pulse laser and enhancement of pre-doping of Li+ ions to laminated graphite anodes with micrometre-sized holes formed on the porous graphite anodes ECS Trans. 77 1897–903

    [47] [47] Tsuda T, Ando N, Haruki Y, Tanabe T, Gunji T, Itagaki K, Soma N, Nakamura S, Hayashi N and Matsumoto F 2018 Study on Li metal deposition, SEI formation on anodes and cathode potential change during the pre-lithiation process in a cell prepared with laminated porous anodes and cathodes ECS Trans. 85 1507–15

    Tools

    Get Citation

    Copy Citation Text

    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Review of the structure and performance of through-holed anodes and cathodes prepared with a picosecond pulsed laser for lithium-ion batteries[J]. International Journal of Extreme Manufacturing, 2023, 5(1): 12001

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Topical Review

    Received: Jun. 8, 2022

    Accepted: --

    Published Online: Jul. 26, 2024

    The Author Email: (fmatsumoto@kanagawa-u.ac.jp)

    DOI:10.1088/2631-7990/aca1f0

    Topics