[1] [1] HOU X R, ZHOU S M, LI Y K, et al. Effect of ZrO2 on the sinterability and spectral properties of (Yb0.05Y0.95)2O3 transparent ceramic[J]. Opt Mater, 2010, 32(9): 920-923.

[2] [2] PARKHOMENKO S, BALABANOV A, KRYZHANOVSKA O, et al. Effect of green body annealing on microstructure and optical properties of Y2O3:Yb3+ ceramics[J]. Ceram Int, 2023, 49(17): 29048-29054.

[3] [3] CHERNOMORETS D G, PIANCASTELLI A, ESPOSITO L, et al. Effect of milling parameters on the morphology and sinterability of the yttrium oxide powders for transparent ceramics[J]. Open Ceram, 2023, 15: 100391.

[4] [4] KEAR B H, COLAIZZI J, MAYO W E, et al. On the processing of nanocrystalline and nanocomposite ceramics[J]. Scr Mater, 2001, 44(8/9): 2065-2068.

[5] [5] YIN D L, WANG J, WANG Y, et al. Fabrication of Er:Y2O3 transparent ceramics for 2.7 μm mid-infrared solid-state lasers[J]. J Eur Ceram Soc, 2020, 40(2): 444-448.

[6] [6] BALABANOV S, PERMIN D, EVSTROPOV T, et al. Hot pressing of Yb:Y2O3 laser ceramics with LiF sintering aid[J]. Opt Mater, 2021, 119: 111349.

[7] [7] ZHANG L, YANG J, YU H Y, et al. Highly efficient up-conversion in Nd:Y2O3 transparent ceramics[J]. Scr Mater, 2020, 178: 281-284.

[8] [8] ZHU L L, PARK Y J, GAN L, et al. Effects of the Zr content on transparent Y2O3 ceramics fabricated by vacuum pre-sintering and a subsequent HIP treatment[J]. J Mater Sci Mater Electron, 2017, 28(11): 7854-7861.

[9] [9] ZHANG J Y, ZHANG Z T, TANG Z L, et al. Luminescent properties of Y2O3:Eu synthesized by sol-gel processing[J]. J Mater Process Technol, 2002, 121(2/3): 265-268.

[10] [10] RULISON A J, FLAGAN R C. Synthesis of yttria powders by electrospray pyrolysis[J]. J Am Ceram Soc, 1994, 77(12): 3244-3250.

[11] [11] DELL’AGLI G, MASCOLO G. Hydrothermal synthesis of ZrO2-Y2O3 solid solutions at low temperature[J]. J Eur Ceram Soc, 2000, 20(2): 139-145.

[12] [12] WANG Y, WANG J, NI M, et al. Exploring the evolution of pores in HIPed Y2O3 transparent ceramics[J]. Ceram Int, 2021, 47(8): 11637-11643.

[13] [13] WANG H Z, GAO L, NIIHARA K. Synthesis of nanoscaled yttrium aluminum garnet powder by the co-precipitation method[J]. Mater Sci Eng A, 2000, 288(1): 1-4.

[14] [14] YANG Y, XU S M, XIE M, et al. Growth mechanisms for spherical mixed hydroxide agglomerates prepared by co-precipitation method: A case of Ni1/3Co1/3Mn1/3(OH)2[J]. J Alloys Compd, 2015, 619: 846-853.

[15] [15] SERIVALSATIT K, KOKUOZ B, YAZGAN-KOKUOZ B, et al. Synthesis, processing, and properties of submicrometer-grained highly transparent yttria ceramics[J]. J Am Ceram Soc, 2010, 93(5): 1320-1325.

[16] [16] CHEN P H, WANG Q, HU D J, et al. Fabrication and microstructure evolution of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics from co-precipitated nanopowders[J]. Opt Mater, 2023, 142: 113997.

[17] [17] NIKOLIC N. Preparation of fine oxide ceramic powders by freeze drying[J]. Ann De Chim Sci Des Mat??riaux, 2001, 26(5): 35-41.

[18] [18] NAJAFZADEHKHOEE A, TALIMIAN A, SEDLá?EK J, et al. Translucent yttrium oxide ceramics from low-density green bodies shaped by uniaxial pressing[J]. J Eur Ceram Soc, 2022, 42(11): 4623-4630.

[19] [19] CAO Y F, LI H Y, ZHENG X Y, et al. Simultaneous precipitation of Zr4+ and Y3+ ions induced refinement of precursors and powders in fabrication of Zr4+ doped Y2O3 transparent ceramics[J]. Opt Mater, 2023, 139: 113802.

[20] [20] ZHANG J A, AN L Q, LIU M, et al. Sintering of Yb3+:Y2O3 transparent ceramics in hydrogen atmosphere[J]. J Eur Ceram Soc, 2009, 29(2): 305-309.

[21] [21] HUANG Z G, SUN X D, XIU Z M, et al. Precipitation synthesis and sintering of yttria nanopowders[J]. Mater Lett, 2004, 58(15): 2137-2142.

[22] [22] OH H M, PARK Y J, KIM H N, et al. Effect of milling ball size on the densification and optical properties of transparent Y2O3 ceramics[J]. Ceram Int, 2021, 47(4): 4681-4687.

[23] [23] KIMURA H, KATO T, YAMAMOTO S I, et al. Influence of Yb doping on optical and upconversion photoluminescence properties of Yb-, Er-co-doped Y2O3 transparent ceramics prepared by SPS[J]. J Mater Sci Mater Electron, 2021, 32(5): 6304-6311.

[24] [24] HU Z W, LIU P, WANG X D, et al. Spectroscopic investigations and Judd-Ofelt analysis of Sm3+ doped Y2O3 transparent ceramics[J]. Phys B Condens Matter, 2023, 669: 415283.

[25] [25] YIN D L, WANG J, NI M, et al. Fabrication of highly transparent Y2O3 ceramics with CaO as sintering aid[J]. Materials, 2021, 14(2): 444.

[26] [26] OH H M, PARK Y J, KIM H N, et al. Remarkable plasma-resistance performance by nanocrystalline Y2O3·MgO composite ceramics for semiconductor industry applications[J]. Sci Rep, 2021, 11(1): 10288.

[27] [27] DUTTA S K, GAZZA G E. Transparent Y2O3 by hot-pressing[J]. Mater Res Bull, 1969, 4(11): 791-796.

[28] [28] MAJIMA K, NIIMI N, WATANABE M, et al. Effect of LiF addition on the preparation of transparent Y2O3 by the vacuum hot pressing method[J]. J Alloys Compd, 1993, 193(1/2): 280-282.

[29] [29] LIU C R, ZHOU G H, JIANG J, et al. Fabrication and luminescence properties of highly transparent and submicrometer-grained Yb:Y2O3 ceramics by hot-pressing sintering[J]. J Alloys Compd, 2022, 898: 163002.

[30] [30] GAN L, PARK Y J, PARK M J, et al. Facile fabrication of highly transparent yttria ceramics with fine microstructures by a hot-pressing method[J]. J Am Ceram Soc, 2015, 98(7): 2002-2004.

[31] [31] SAKAJIO M, SHTER G E, MANN-LAHAV M, et al. Carbon contamination prevention during spark plasma sintering[J]. ACS Appl Mater Interfaces, 2023, 15(31): 38080-38089.

[32] [32] KHAJELAKZAY M, RAZAVI R S, BAREKAT M. Synthesis and characterization of yttria nanopowders by precipitation method[J]. Trans Indian Ceram Soc, 2015, 74(4): 208-212.

[33] [33] LIU Z F, JIN Z G, LI W, et al. Preparation of ZnO porous thin films by so-gel method using PEG template[J]. Mater Lett, 2005, 59(28): 3620-3625.

[34] [34] SREENIVASULU G, JAYARAJU N, SUNDARA RAJA REDDY B C, et al. Organic matter from benthic foraminifera (Ammonia beccarii) shells by FT-IR spectroscopy: A study on Tupilipalem, South east coast of India[J]. MethodsX, 2017, 4: 55-62.

[35] [35] GONG H, TANG D Y, HUANG H, et al. Effect of grain size on the sinterability of yttria nanopowders synthesized by carbonate- precipitation process[J]. Mater Chem Phys, 2008, 112(2): 423-426.

[36] [36] FROLOVA E A, KONDAKOV D F, YAPRYNTSEV A D, et al. Synthesis of basic yttrium nitrate[J]. Russ J Inorg Chem, 2015, 60(3): 259-264.

[37] [37] IKEGAMI T, LI J G, MORI T, et al. Fabrication of transparent yttria ceramics by the low-temperature synthesis of yttrium hydroxide[J]. J Am Ceram Soc, 2002, 85(7): 1725-1729.

[38] [38] DEARMITT C, ROTHON R. Dispersants and coupling agents[M]// Applied Plastics Engineering Handbook. Amsterdam: Elsevier, 2011: 441-454.

[39] [39] GAN L, PARK Y J, KIM H, et al. The effects of the temperature and pressure on ZrO2-doped transparent yttria ceramics fabricated by a hot-pressing method[J]. Opt Mater, 2017, 71: 109-116.

[40] [40] YALU M, YU Z, JUNPING Z. Agglomeration control of ultrafine Y2O3-ZrO2 and (MgO, Y2O3)-ZrO2 powders synthesized by coprecipitation process[J]. Transact Tianjin Univ, 2005, 11(1): 17-21.