[8] [8] POWERS T C. The mechanisms of frost action in concrete (Durability of Concrete, SP-8)[R]. Detroit: ACI, 1965: 42-47.

[9] [9] POWERS T, HELMUTH R. Theory of volume changes in hardened port land-cement paste during freezing[C]. Highway Research Board, 1953, 32: 285-297.

[10] [10] KESSLER S, THIEL C, GROSSE C U, et al. Effect of freeze-thaw damage on chloride ingress into concrete[J]. Materials and Structures, 2017, 50: 121-134.

[25] [25] KONG X F, LU S L, LI Y R, et al. Numerical study on the thermal performance of building wall and roof incorporating phase change material panel for passive cooling application[J]. Energy and Buildings, 2014, 81: 404-415.

[26] [26] NAZIR H, BATOOL M, BOLIVAR OSORIO F J, et al. Recent developments in phase change materials for energy storage applications: a review[J]. International Journal of Heat and Mass Transfer, 2019, 129: 491-523.

[27] [27] KUZNIK F, VIRGONE J. Experimental assessment of a phase change material for wall building use[J]. Applied Energy, 2009, 86(10): 2038-2046.

[30] [30] MA B, CHEN S S, REN Y Z, et al. The thermoregulation effect of microencapsulated phase-change materials in an asphalt mixture[J]. Construction and Building Materials, 2020, 231: 117186.

[38] [38] REGIN A F, SOLANKI S C, SAINI J S. Heat transfer characteristics of thermal energy storage system using PCM capsules: a review[J]. Renewable and Sustainable Energy Reviews, 2008, 12(9): 2438-2458.

[39] [39] ZHANG H L, BAEYENS J, CCERES G, et al. Thermal energy storage: recent developments and practical aspects[J]. Progress in Energy and Combustion Science, 2016, 53: 1-40.

[41] [41] CABEZA L F, CASTELL A, BARRENECHE C, et al. Materials used as PCM in thermal energy storage in buildings: a review[J]. Renewable and Sustainable Energy Reviews, 2011, 15(3): 1675-1695.

[42] [42] SOARES N, COSTA J J, GASPAR A R, et al. Review of passive PCM latent heat thermal energy storage systems towards buildings' energy efficiency[J]. Energy and Buildings, 2013, 59: 82-103.

[43] [43] KIM Y R, KHIL B S, JANG S J, et al. Effect of barium-based phase change material (PCM) to control the heat of hydration on the mechanical properties of mass concrete[J]. Thermochimica Acta, 2015, 613: 100-107.

[44] [44] FERNANDES F, MANARI S, AGUAYO M, et al. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials[J]. Cement and Concrete Composites, 2014, 51: 14-26.

[45] [45] QIAN C X, GAO G B. Reduction of interior temperature of mass concrete using suspension of phase change materials as cooling fluid[J]. Construction and Building Materials, 2012, 26(1): 527-531.

[46] [46] KIM G, LEE E, KIM Y, et al. Hydration heat and autogenous shrinkage of high-strength mass concrete containing phase change material[J]. Journal of Asian Architecture and Building Engineering, 2010, 9(2): 455-462.

[47] [47] MEMON S A, CUI H Z, ZHANG H, et al. Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete[J]. Applied Energy, 2015, 139: 43-55.

[48] [48] ZHANG D, LI Z J, ZHOU J M, et al. Development of thermal energy storage concrete[J]. Cement and Concrete Research, 2004, 34(6): 927-934.

[49] [49] NAYAK S, KRISHNAN N M A, DAS S. Microstructure-guided numerical simulation to evaluate the influence of phase change materials (PCMs) on the freeze-thaw response of concrete pavements[J]. Construction and Building Materials, 2019, 201: 246-256.

[50] [50] YEON J H, KIM K K. Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement[J]. Construction and Building Materials, 2018, 177: 202-209.

[53] [53] ZHOU X M, KASTIUKAS G, LANTIERI C, et al. Mechanical and thermal performance of macro-encapsulated phase change materials for pavement application[J]. Materials, 2018, 11(8): 1398-1415.

[54] [54] BENTZ D P, TURPIN R. Potential applications of phase change materials in concrete technology[J]. Cement and Concrete Composites, 2007, 29(7): 527-532.

[59] [59] SHE Z Y, WEI Z H, YOUNG B A, et al. Examining the effects of microencapsulated phase change materials on early-age temperature evolutions in realistic pavement geometries[J]. Cement and Concrete Composites, 2019, 103: 149-159.

[60] [60] LI W T, LING C W, JIANG Z W, et al. Evaluation of the potential use of form-stable phase change materials to improve the freeze-thaw resistance of concrete[J]. Construction and Building Materials, 2019, 203: 621-632.

[61] [61] LIU F, TANG R, MA W W, et al. Frost resistance and meso-deterioration analysis of microcapsulated phase change materials modified concrete[J]. Journal of Building Engineering, 2022, 61: 105214.

[62] [62] TIAN Y, LAI Y M, QIN Z P, et al. Numerical investigation on the thermal control performance and freeze-thaw resistance of a composite concrete pier with microencapsulated phase change materials[J]. Solar Energy, 2022, 231: 970-984.

[69] [69] NAYAK S, LYNGDOH G A, DAS S. Influence of microencapsulated phase change materials (PCMs) on the chloride ion diffusivity of concretes exposed to Freeze-thaw cycles: insights from multiscale numerical simulations[J]. Construction and Building Materials, 2019, 212: 317-328.

[70] [70] YUAN X S, WANG B M, CHEN P, et al. Study on the frost resistance of concrete modified with steel balls containing phase change material (PCM)[J]. Materials, 2021, 14(16): 4497.

[71] [71] LI H W X, LYNGDOH G, KRISHNAN N M A, et al. Machine learning guided design of microencapsulated phase change materials-incorporated concretes for enhanced freeze-thaw durability[J]. Cement and Concrete Composites, 2023, 140: 105090.

[75] [75] MOHSENI E, TANG W, KHAYAT K H, et al. Thermal performance and corrosion resistance of structural-functional concrete made with inorganic PCM[J]. Construction and Building Materials, 2020, 249: 118768.

[76] [76] PILEHVAR S, SZCZOTOK A M, RODRGUEZ J F, et al. Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials[J]. Construction and Building Materials, 2019, 200: 94-103.

[77] [77] LANZN M, CNUDDE V, DE KOCK T, et al. Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes[J]. Construction and Building Materials, 2015, 94: 817-825.

[78] [78] GONZLEZ M A, IRASSAR E F. Ettringite formation in low C3A Portland cement exposed to sodium sulfate solution[J]. Cement and Concrete Research, 1997, 27(7): 1061-1071.

[79] [79] ODLER I, COLN-SUBAUSTE J. Investigations on cement expansion associated with ettringite formation[J]. Cement and Concrete Research, 1999, 29(5): 731-735.

[85] [85] PILEHVAR S, CAO V D, SZCZOTOK A M, et al. Physical and mechanical properties of fly ash and slag geopolymer concrete containing different types of micro-encapsulated phase change materials[J]. Construction and Building Materials, 2018, 173: 28-39.

[87] [87] HAIDER M Z, JIN X H, SHARMA R, et al. Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes[J]. Construction and Building Materials, 2022, 314: 125659.