[1] [1] Ohmori H and Nakagawa T 1995 Analysis of mirror surface generation of hard and brittle materials by ELID (electronic in-process dressing) grinding with superfine grain metallic bond wheels CIRP Ann. 44 287–90

[2] [2] Agarwal S and Rao P V 2008 Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding Int. J. Mach. Tools Manuf. 48 698–710

[3] [3] LiC,PiaoY, MengBB,HuYX,LiLQandZhangFH 2022 Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals Int. J. Mach. Tools Manuf. 172 103827

[4] [4] Santailler J L et al 2020 From 5” CdZnTe ingots to high quality (111) CdZnTe substrates for SWIR 2K2 15 μm pitch infrared focal plane arrays manufacturing Proc. SPIE 11407 114070G

[5] [5] Szeles C 2004 Advances in the crystal growth and device fabrication technology of CdZnTe room temperature radiation detectors IEEE Trans. Nucl. Sci. 51 1242–9

[6] [6] Dwivedi A D D 2011 Analytical modeling and numerical simulation of P+-Hg0.69 Cd0.31Te/n-Hg0.78Cd0.22Te/CdZnTe heterojunction photodetector for a long-wavelength infrared free space optical communication system J. Appl. Phys. 110 043101

[7] [7] Gavrishchuk E M and Yashina ′E V 2004 Zinc sulfide and zinc selenide optical elements for IR engineering J. Opt. Technol. 71 822–7

[8] [8] ChenWQ,LiangYC,LuoXC,SunYZandWangHR 2014 Multi-scale surface simulation of the KDP crystal fly cutting machining Int. J. Adv. Manuf. Technol. 73 289–97

[9] [9] LiY, KangRK,GaoH,WangJHandLangYJ2009 Nanomechanical behaviors of (110) and (111) CdZnTe crystals investigated by nanoindentation Rare Met. 28 570–5

[10] [10] Broult T, Kerlain A, Destefanis V, Guinedor P, Bourhis E L and Patriarche G 2021 Development of a cryogenic indentation tool with in situ optical observation, application to the mechanical characterization of II–VI semiconductors Semicond. Sci. Technol. 36 035015

[11] [11] Irwan R, Huang H, Zheng H Y and Wu H 2013 Mechanical properties and material removal characteristics of soft-brittle HgCdTe single crystals Mater. Sci. Eng. A 559 480–5

[12] [12] Lei W, Antoszewski J and Faraone L 2015 Progress, challenges, and opportunities for HgCdTe infrared materials and detectors Appl. Phys. Rev. 2 041303

[13] [13] Deadmore D L and Sliney H E 1987 Hardness of CaF2 and BaF2 Solid Lubricants at 25–670 .C NASA Technical Memorandum 88979 (Cleveland, Ohio)

[14] [14] Schultz R A, Jensen M C and Bradt R C 1994 Single crystal cleavage of brittle materials Int. J. Fract. 65 291–312

[15] [15] Hahn D 2014 Calcium fluoride and barium fluoride crystals in optics Opt. Photon. 9 45–48

[16] [16] Grillo S E, Ducarroir M, Nadal M, Tourni E and Faurie J P 2002 Nanoindentation of Si, GaP, GaAs and ZnSe single crystals J. Phys. D: Appl. Phys. 36 L5–9

[17] [17] Huang W H and Yan J W 2020 Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe Int. J. Mach. Tools Manuf. 153 103554

[18] [18] Fang T and Lambropoulos J C 2002 Microhardness and indentation fracture of potassium dihydrogen phosphate (KDP) J. Am. Ceram. Soc. 85 174–8

[19] [19] Mizumoto Y, Aoyama T and Kakinuma Y 2011 Basic study on Ultraprecision machining of single-crystal calcium fluoride Proc. Eng. 19 264–9

[20] [20] Julie L L, James J P, John D H and William R R 2005 Hardness, elastic modulus, and fracture toughness bulk properties in corning calcium fluoride Proc. SPIE 5754 1329–38

[21] [21] Canon Optron, Inc 2021 Products CaF2 (fluorite) (available at: https://optron.canon/en/fluorite/products_caf2.html)

[22] [22] Lawn B R and Marshall D B 1979 Hardness, toughness, and brittleness: an indentation analysis J. Am. Ceram. Soc. 62 347–50

[23] [23] Zong W J, Cao Z M, He C L and Xue C X 2016 Theoretical modelling and FE simulation on the oblique diamond turning of ZnS crystal Int. J. Mach. Tools Manuf. 100 55–71

[24] [24] Aldabib J M and Ishak Z A M 2020 Effect of hydroxyapatite filler concentration on mechanical properties of poly (methyl methacrylate) denture base SN Appl. Sci. 2 732

[25] [25] Khadraoui S, Hachemi M, Allal A, Rabiei M, Arabi A, Khodja M, Lebouachera S E I and Drouiche N 2021 Numerical and experimental investigation of hydraulic fracture using the synthesized PMMA Polym. Bull. 78 3803–20

[26] [26] Mukaida M and Yan J W 2017 Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo Int. J. Mach. Tools Manuf. 115 2–14

[27] [27] Giredmet Company. CdZnTe substrate (available at: https:// giredmet.ru/ru/production/podlozhki-cdznte/)

[28] [28] Sumitomo Electric Industries, Ltd ZnSe lens (available at: www.sumitool.com/products/laser-optics/co2laser/lens. html)

[29] [29] Canon Optron, Inc History of fluorite lenses (available at: https://optron.canon/ja/domain/fluorite/history.html)

[30] [30] Zhang Y, Hou N and Zhang L C 2020 Effect of ultra-precision fly-cutting on the surface integrity of potassium dihydrogen phosphate crystals Opt. Mater. Express 10 971–80

[31] [31] Fang F Z and Chen L J 2000 Ultra-precision cutting for ZKN7 glass CIRP Ann. 49 17–20

[32] [32] Yan J W, Asami T, Harada H and Kuriyagawa T 2009 Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining Precis. Eng. 33 378–86

[33] [33] Antwi E K, Liu K and Wang H 2018 A review on ductile mode cutting of brittle materials Front. Mech. Eng. 13 251–63

[34] [34] Huang H, Li X L, Mu D K and Lawn B R 2021 Science and art of ductile grinding of brittle solids Int. J. Mach. Tools Manuf. 161 103675

[35] [35] You K Y, Yan G P, Luo X C, Gilchrist M D and Fang F Z 2020 Advances in laser assisted machining of hard and brittle materials J. Manuf. Process. 58 677–92

[36] [36] Wang J J, Zhang J F, Feng P F and Guo P 2018 Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review Ceram. Int. 44 1227–39

[37] [37] Lawn B R, Borrero-Lopez O, Huang H and Zhang Y 2021 Micromechanics of machining and wear in hard and brittle materials J. Am. Ceram. Soc. 104 5–22

[38] [38] Zhang T, Jiang F, Huang H, Lu J, Wu Y Q, Jiang Z Y and Xu X P 2021 Towards understanding the brittle–ductile transition in the extreme manufacturing Int. J. Extreme Manuf. 3 022001

[39] [39] Zhang B and Yin J F 2019 The ‘skin effect’ of subsurface damage distribution in materials subjected to high-speed machining Int. J. Extreme Manuf. 1 012007

[40] [40] GuoXG,LiQ,LiuT, KangRK,JinZJandGuoDM2017 Advances in molecular dynamics simulation of ultra-precision machining of hard and brittle materials Front. Mech. Eng. 12 89–98

[41] [41] Goel S, Luo X C, Agrawal A and Reuben R L 2015 Diamond machining of silicon: a review of advances in molecular dynamics simulation Int. J. Mach. Tools Manuf. 88 131–64

[42] [42] Zhu W L and Beaucamp A 2020 Compliant grinding and polishing: a review Int. J. Mach. Tools Manuf. 158 103634

[43] [43] Luo H, Ajmal K M, Liu W, Yamamura K and Deng H 2021 Polishing and planarization of single crystal diamonds: state-of-the-art and perspectives Int. J. Extreme Manuf. 3 022003

[44] [44] Qu M N, Xie G Z, Jin T, Cai R and Lu A G 2019 Realization of high efficiency and low damage machining of anisotropic KDP crystal by grinding Precis. Eng. 55 464–73

[45] [45] Zhang Y, Hou N and Zhang L C 2019 Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultra-precision fly cutting Adv. Manuf. 7 270–7

[46] [46] ZhangZY, XuCG,ZhangXZandGuoDM2012 Mechanical characteristics of nanocrystalline layers containing nanotwins induced by nanogrinding of soft-brittle CdZnTe single crystals Scr. Mater. 67 392–5

[47] [47] WangSF, AnCH,ZhangFH,WangJ,LeiXYand Zhang J F 2016 An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal Int. J. Mach. Tools Manuf. 106 98–108

[48] [48] Azami S, Kudo H, Mizumoto Y, Tanabe T, Yan J W and Kakinuma Y 2015 Experimental study of crystal anisotropy based on ultra-precision cylindrical turning of single-crystal calcium fluoride Precis. Eng. 40 172–81

[49] [49] Yao L X, Zhang L, Jiang Q Q and Yang C F 2020 Prediction of critical undeformed chip thickness for ductile mode to brittle transition in the cutting of single-crystal silicon Semicond. Sci. Technol. 35 095010

[50] [50] Gao H, Wang X, Guo D M and Chen Y C 2017 Research progress on ultra-precision machining technologies for soft-brittle crystal materials Front. Mech. Eng. 12 77–88

[51] [51] Momma K and Izumi F 2011 VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data J. Appl. Crystallogr. 44 1272–6

[52] [52] Hou Z B and Komanduri R 2003 On the mechanics of the grinding process—part I. Stochastic nature of the grinding process Int. J. Mach. Tools Manuf. 43 1579–93

[53] [53] Kumar S, Tong Z and Jiang X Q 2022 Advances in the design and manufacturing of novel freeform optics Int. J. Extreme Manuf. 4 032004

[54] [54] ZhouTF, HeYP, WangTX,ZhuZC,XuRZ,Yu Q, Zhao B, Zhao W X, Liu P and Wang X B 2021 A review of the techniques for the mold manufacturing of micro/nanostructures for precision glass molding Int. J. Extreme Manuf. 3 042002

[55] [55] Nagayama K and Yan J W 2021 Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy J. Manuf. Process. 64 45–57

[56] [56] Yan J W, Tamaki J, Syoji K and Kuriyagawa T 2004 Ductile regime machining of single-crystal CaF2 for aspherical lenses Key Eng. Mater. 257–258 95–100

[57] [57] Chen Y H, Sun L H and Wu Y B 2022 Improving the machining performance in single-point diamond turning of curved Zerodur optics by using straight-nosed cutting tools J. Mater. Process. Technol. 310 117777

[58] [58] Jasinevicius R G, Duduch J G, Cirino G A and Pizani P S 2013 Diamond turning of small Fresnel lens array in single crystal InSb J. Micromech. Microeng. 23 055025

[59] [59] Gao X, Xue C X, Chao Y and Liu Y 2021 Optimization method of manufacturing for diamond turning soft-brittle materials’ harmonic diffractive optical elements Appl. Opt. 60 162–71

[60] [60] Yan J W, Maekawa K, Tamaki J and Kuriyagawa T 2005 Micro grooving on single-crystal germanium for infrared Fresnel lenses J. Micromech. Microeng. 15 1925–31

[61] [61] Blake P N and Scattergood R O 1990 Ductile-regime machining of germanium and silicon J. Am. Ceram. Soc. 73 949–57

[62] [62] Heidari M, Akbari J and Yan J W 2019 Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon J. Manuf. Process. 37 321–31

[63] [63] Ohta T, Yan J W, Yajima S, Takahashi Y, Horikawa N and Kuriyagawa T 2007 High-efficiency machining of single-crystal germanium using large-radius diamond tools Int. J. Surf. Sci. Eng. 1 374–92

[64] [64] Fuchs B A, Hed P P and Baker P C 1986 Fine diamond turning of KDP crystals Appl. Opt. 25 1733–5

[65] [65] ZongWJ,LiZQ,ZhangL,LiangYC,SunT, AnCH, Zhang J F, Zhou L and Wang J 2013 Finite element simulation of diamond tool geometries affecting the 3D surface topography in fly cutting of KDP crystals Int. J. Adv. Manuf. Technol. 68 1927–36

[66] [66] Huang W H and Yan J W 2021 Effect of tool shape on the machined surface integrity of polycrystalline ZnSe In Proc. 21st Int. Conf. European Society for Precision Engineering and Nanotechnology, EUSPEN 2021 (EUSPEN) pp 387–90 (available at: www.euspen. eu/knowledge-base/ICE21236.pdf)

[67] [67] Xiao H P, Liang R G, Spires O, Wang H R, Wu H and Zhang Y Y 2019 Evaluation of surface and subsurface damages for diamond turning of ZnSe crystal Opt. Express 27 28364–82

[68] [68] Geng R W, Yang X J, Xie Q M, Zhang W Q, Kang J, Liang Y Q and Li R 2021 Ultra-precision diamond turning of ZnSe ceramics: surface integrity and ductile regime machining mechanism Infrared Phys. Technol. 115 103706

[69] [69] Kakinuma Y, Azami S and Tanabe T 2015 Evaluation of subsurface damage caused by ultra-precision turning in fabrication of CaF2 optical micro resonator CIRP Ann. 64 117–20

[70] [70] Mizumoto Y, Kangawa H, Nakagawa Y, Itobe H, Tanabe T and Kakinuma Y 2016 Influence of nose radius on surface integrity in ultra-precision cylindrical turning of single-crystal calcium fluoride Proc. CIRP 45 139–42

[71] [71] Mizumoto Y, Kangawa H, Itobe H, Tanabe T and Kakinuma Y 2017 Influence of crystal anisotropy on subsurface damage in ultra-precision cylindrical turning of CaF2 Precis. Eng. 49 104–14

[72] [72] Yan J 2011 Ultraprecision cutting of photoresist/gold composite microstructures CIRP Ann. 60 133–6

[73] [73] Mahajan K A, Pawade R S and Mishra V 2022 Tool vibration effect on surface roughness of polymethylmethacrylate in diamond turning Mater. Manuf. Process. 37 271–82

[74] [74] Bodlapati C, Dow T, Wong A and Garrard K 2018 Surface finish and diamond tool wear when machining PMMA and PC optics Proc. SPIE 10742 107420D

[75] [75] Yan J W, Syoji K and Tamaki J I 2004 Crystallographic effects in micro/nanomachining of single-crystal calcium fluoride J. Vac. Sci. Technol. B 22 46–51

[76] [76] Yan J W, Syoji K, Kuriyagawa T and Suzuki H 2002 Ductile regime turning at large tool feed J. Mater. Process. Technol. 121 363–72

[77] [77] Yan J W, Tamaki J I, Syoji K and Kuriyagawa T 2004 Single-point diamond turning of CaF2 for nanometric surface Int. J. Adv. Manuf. Technol. 24 640–6

[78] [78] Huang W H and Yan J W 2021 Fundamental investigation of diamond cutting of micro V-shaped grooves on a polycrystalline soft-brittle material J. Manuf. Mater. Process. 5 17

[79] [79] Lee Y J, Senthil Kumar A and Wang H 2021 Beneficial stress of a coating on ductile-mode cutting of single-crystal brittle material Int. J. Mach. Tools Manuf. 168 103787

[80] [80] Wang H, Riemer O, Rickens K and Brinksmeier E 2016 On the mechanism of asymmetric ductile–brittle transition in microcutting of (111) CaF2 single crystals Scr. Mater. 114 21–26

[81] [81] Fang F Z and Xu F F 2018 Recent advances in micro/nano-cutting: effect of tool edge and material properties Nanomanuf. Metrol. 1 4–31

[82] [82] Rahman M A, Amrun M R, Rahman M and Kumar A S 2017 Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties Int. J. Mach. Tools Manuf. 115 15–28

[83] [83] Xie W K and Fang F Z 2020 Effect of tool edge radius on material removal mechanism in atomic and close-to-atomic scale cutting Appl. Surf. Sci. 504 144451

[84] [84] Yan J W, Zhao H W and Kuriyagawa T 2009 Effects of tool edge radius on ductile machining of silicon: an investigation by FEM Semicond. Sci. Technol. 24 075018

[85] [85] Ameli Kalkhoran S N, Vahdati M and Yan J W 2020 Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: a molecular dynamics approach Mater. Sci. Semicond. Process. 108 104868

[86] [86] Fang F Z, Wu H and Liu Y C 2005 Modelling and experimental investigation on nanometric cutting of monocrystalline silicon Int. J. Mach. Tools Manuf. 45 1681–6

[87] [87] Chen M J, Jiang W B and Li M Q 2011 Effects of tool edge radius and rake angle on ductile machining process of CaF2 Int. J. Nanomanuf. 7 350–60

[88] [88] Zhang S and Zong W J 2020 Micro defects on diamond tool cutting edge affecting the ductile-mode machining of KDP crystal Micromachines 11 1102

[89] [89] Liu Q, Liao Z R, Cheng J, Xu D D and Chen M J 2021 Mechanism of chip formation and surface-defects in orthogonal cutting of soft-brittle potassium dihydrogen phosphate crystals Mater. Des. 198 109327

[90] [90] Yan J W, Asami T, Harada H and Kuriyagawa T 2012 Crystallographic effect on subsurface damage formation in silicon microcutting CIRP Ann. 61 131–4

[91] [91] Chen X, Xu J F, Fang H S and Tian R J 2017 Influence of cutting parameters on the ductile-brittle transition of single-crystal calcium fluoride during ultra-precision cutting Int. J. Adv. Manuf. Technol. 89 219–25

[92] [92] Zhang S, Zhang H J and Zong W J 2019 Modeling and simulation on the effect of tool rake angle in diamond turning of KDP crystal J. Mater. Process. Technol. 273 116259

[93] [93] Chen M J, Wang J H, Liang Y C and Yuan D Y 2007 Research on influence of the cutter rake angle to the surface quality during SPDT machining of crystal KDP Key Eng. Mater. 339 1–5

[94] [94] Zhou T F, Ruan B S, Zhou J, Dong X B, Liang Z Q and Wang X B 2019 Mechanism of brittle fracture in diamond turning of microlens array on polymethyl methacrylate Adv. Manuf. 7 228–37

[95] [95] Fang F Z, Venkatesh V C and Zhang G X 2002 Diamond turning of soft semiconductors to obtain nanometric mirror surfaces Int. J. Adv. Manuf. Technol. 19 637–41

[96] [96] Yan J W, Zhang Z Y, Kuriyagawa T and Gonda H 2010 Fabricating micro-structured surface by using single-crystalline diamond endmill Int. J. Adv. Manuf. Technol. 51 957–64

[97] [97] Matsumura T 2018 Micro milling for functional surface Micro and Nano Fabrication Technology 1st edn ed J W Yan Micro/Nano Technologies (Singapore: Springer) pp 1–34

[98] [98] ChenN,LiHN,Wu JM,LiZJ,LiL,LiuGYandHeN 2021 Advances in micro milling: from tool fabrication to process outcomes Int. J. Mach. Tools Manuf. 160 103670

[99] [99] FangFZ,Wu H,LiuXD,LiuYCandNgST2003Tool geometry study in micromachining J. Micromech. Microeng. 13 726–31

[100] [100] Chen N, Chen M J, Wu C Y, Pei X D, Qian J and Reynaerts D 2017 Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal Int. J. Mech. Sci. 134 387–98

[101] [101] Arif M, Rahman M and San W Y 2011 Ultraprecision ductile mode machining of glass by micromilling process J. Manuf. Process. 13 50–59

[102] [102] Rusnaldy N, Ko T J and Kim H S 2007 Micro-end-milling of single-crystal silicon Int. J. Mach. Tools Manuf. 47 2111–9

[103] [103] Oliaei S N B and Karpat Y 2018 Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon Precis. Eng. 51 403–14

[104] [104] Xiao Y, Chen M J, Yang Y T and Cheng J 2015 Research on the critical condition of brittle-ductile transition about micro-milling of KDP crystal and experimental verification Int. J. Precis. Eng. Manuf. 16 351–9

[105] [105] Ono T and Matsumura T 2008 Influence of tool inclination on brittle fracture in glass cutting with ball end mills J. Mater. Process. Technol. 202 61–69

[106] [106] Foy K, Wei Z, Matsumura T and Huang Y 2009 Effect of tilt angle on cutting regime transition in glass micromilling Int. J. Mach. Tools Manuf. 49 315–24

[107] [107] Aurich J C, Reichenbach I G and Schüler G M 2012 Manufacture and application of ultra-small micro end mills CIRP Ann. 61 83–86

[108] [108] Choong Z J, Huo D H, Degenaar P and O’Neill A 2019 Micro-machinability and edge chipping mechanism studies on diamond micro-milling of monocrystalline silicon J. Manuf. Process. 38 93–103

[109] [109] Huo D H, Lin C, Choong Z J, Pancholi K and Degenaar P 2015 Surface and subsurface characterisation in micro-milling of monocrystalline silicon Int. J. Adv. Manuf. Technol. 81 1319–31

[110] [110] Liu Q, Cheng J, Liao Z R, Yang H, Zhao L J and Chen M J 2019 Incident laser modulation by tool marks on micro-milled KDP crystal surface: numerical simulation and experimental verification Opt. Laser Technol. 119 105610

[111] [111] Chen N, Chen M J, Guo Y Q and Wang X B 2015 Effect of cutting parameters on surface quality in ductile cutting of KDP crystal using self-developed micro PCD ball end mill Int. J. Adv. Manuf. Technol. 78 221–9

[112] [112] Spaeth M L et al 2016 Optics recycle loop strategy for NIF operations above UV laser-induced damage threshold Fusion Sci. Technol. 69 265–94

[113] [113] Liu Q, Cheng J, Yang H, Xu Y F, Zhao L J, Tan C and Chen M J 2019 Modeling of residual tool mark formation and its influence on the optical performance of KH2PO4 optics repaired by micro-milling Opt. Mater. Express 9 3789–807

[114] [114] Ali M Y and Ong A S 2006 Fabricating micromilling tool using wire electrodischarge grinding and focused ion beam sputtering Int. J. Adv. Manuf. Technol. 31 501–8

[115] [115] Yan J W, Uchida K, Yoshihara N and Kuriyagawa T 2009 Fabrication of micro end mills by wire EDM and some micro cutting tests J. Micromech. Microeng. 19 025004

[116] [116] Zhang Z Y, Peng H M and Yan J W 2013 Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools Int. J. Mach. Tools Manuf. 65 99–106

[117] [117] Chen N, Chen M J, Wu C Y and Pei X D 2017 Cutting surface quality analysis in micro ball end-milling of KDP crystal considering size effect and minimum undeformed chip thickness Precis. Eng. 50 410–20

[118] [118] O’Toole L, Kang C W and Fang F Z 2021 Precision micro-milling process: state of the art Adv. Manuf. 9 173–205

[119] [119] ChenN,ChenMJ,Wu CY, GuoYQandWangYN2016 The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal Precis. Eng. 43 345–55

[120] [120] Yan Y, Zhou P, Wang H P and Mao Y 2020 Thermal effect on poly(methyl methacrylate) (PMMA) material removal in the micromilling process Polymers 12 2122

[121] [121] Ali M Y, Khan A A, Mohamad Asharaf A B and Abdul Wahab A 2012 Prediction of minimum chip thickness in tool based micro end milling Int. J. Integr. Eng. 4 6–10 (available at: https://publisher.uthm.edu.my/ojs/index. php/ijie/article/view/147)

[122] [122] Son S M, Lim H S and Ahn J H 2005 Effects of the friction coefficient on the minimum cutting thickness in micro cutting Int. J. Mach. Tools Manuf. 45 529–35

[123] [123] Chen N, Li L, Wu J M, Qian J, He N and Reynaerts D 2019 Research on the ploughing force in micro milling of soft-brittle crystals Int. J. Mech. Sci. 155 315–22

[124] [124] Korkmaz E, Onler R and Ozdoganlar O B 2017 Micromilling of poly(methyl methacrylate, PMMA) using single-crystal diamond tools Proc. Manuf. 10 683–93

[125] [125] Cheng X, Wang Z G, Nakamoto K and Yamazaki K 2010 Design and development of PCD micro straight edge end mills for micro/nano machining of hard and brittle materials J. Mech. Sci. Technol. 24 2261–8

[126] [126] Cheng X, Wang Z G, Nakamoto K and Yamazaki K 2009 Design and development of a micro polycrystalline diamond ball end mill for micro/nano freeform machining of hard and brittle materials J. Micromech. Microeng. 19 115022

[127] [127] Uchiyama R, Inoue Y, Uchiyama F and Matsumura T 2021 Optimization in milling of polymer materials for high quality surfaces Int. J. Autom. Technol. 15 512–20

[128] [128] Ko T J, Kim H S and Lee S S 2001 Selection of the machining inclination angle in high-speed ball end milling Int. J. Adv. Manuf. Technol. 17 163–70

[129] [129] Liu Q, Cheng J, Xiao Y, Yang H and Chen M J 2018 Effect of milling modes on surface integrity of KDP crystal processed by micro ball-end milling Proc. CIRP 71 260–6

[130] [130] Liu Q, Cheng J, Xiao Y, Chen M J, Yang H and Wang J H 2018 Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling Int. J. Adv. Manuf. Technol. 99 2777–88

[131] [131] Matsumura T and Ono T 2008 Cutting process of glass with inclined ball end mill J. Mater. Process. Technol. 200 356–63

[132] [132] Zhang Z Y, Yan J W and Kuriyagawa T 2019 Manufacturing technologies toward extreme precision Int. J. Extreme Manuf. 1 022001

[133] [133] Namba Y, Yoshida K, Yoshida H and Nakai S 1998 Ultraprecision grinding of optical materials for high-power lasers Proc. SPIE 3244 320–30

[134] [134] Katagiri M and Namba Y 1999 Optical surface generation of KDP inorganic nonlinear optical crystals by ultraprecision surface grinding J. Japan Soc. Precis. Eng. 65 888–92

[135] [135] Qu M N, Jin T, Xie G Z and Cai R 2020 Developing a novel binderless diamond grinding wheel with femtosecond laser ablation and evaluating its performance in grinding soft and brittle materials J. Mater. Process. Technol. 275 116359

[136] [136] QuMN,JinT, XieGZ,CaiRandLuAG2020Designof binderless grinding wheel with positive rake angle and fabrication used femtosecond laser ablation for grinding soft and brittle crystals Opt. Lasers Eng. 124 105803

[137] [137] Wang Q G, Gao H, Zhang Q Z, Cao X S and Kang R K 2008 Experimental researches on precision grinding of KDP crystal Key Eng. Mater. 359–360 113–7

[138] [138] Namba Y, Yoshida T, Yoshida S, Yoshida K and Iwata K 2005 Surfaces of calcium fluoride single crystals ground with an ultra-precision surface grinder CIRP Ann. 54 503–6

[139] [139] ZhangZY, MengYW, GuoDM,Wu LL,TianYJand Liu R P 2010 Material removal mechanism of precision grinding of soft-brittle CdZnTe wafers Int. J. Adv. Manuf. Technol. 46 563–9

[140] [140] Zhang Z Y, Wu Y Q and Huang H 2010 New deformation mechanism of soft-brittle CdZnTe single crystals under nanogrinding Scr. Mater. 63 621–4

[141] [141] Wang Y, Zou J, Huang H, Zhou L, Wang B L and Wu Y Q 2007 Formation mechanism of nanocrystalline high-pressure phases in silicon during nanogrinding Nanotechnology 18 465705

[142] [142] Gao S, Wu Y Q, Kang R K and Huang H 2018 Nanogrinding induced surface and deformation mechanism of single crystal β-Ga2O3 Mater. Sci. Semicond. Process. 79 165–70

[143] [143] Zhang Z Y, Zhang X Z, Xu C G and Guo D M 2013 Characterization of nanoscale chips and a novel model for face nanogrinding on soft-brittle HgCdTe films Tribol. Lett. 49 203–15

[144] [144] Zhang Z Y, Song Y X, Xu C G and Guo D M 2012 A novel model for undeformed nanometer chips of soft-brittle HgCdTe films induced by ultrafine diamond grits Scr. Mater. 67 197–200

[145] [145] Zhang Z Y, Song Y X, Huo F W and Guo D M 2012 Nanoscale material removal mechanism of soft-brittle HgCdTe single crystals under nanogrinding by ultrafine diamond grits Tribol. Lett. 46 95–100

[146] [146] Lawn B 1993 Fracture of Brittle Solids 2nd edn (Cambridge: Cambridge University Press)

[147] [147] Suratwala T, Steele R, Shen N, Ray N, Wong L, Miller P E and Feit M 2020 Lateral cracks during sliding indentation on various optical materials J. Am. Ceram. Soc. 103 1343–57

[148] [148] Hou N, Zhang Y, Zhang L C and Wang M H 2021 Material removal mechanisms and characteristics of potassium dihydrogen phosphate crystals under nanoscratching Adv. Manuf. 9 558–67

[149] [149] Zhang Y, Zhang L C, Liu M, Zhang F H, Mylvaganam K and Liu W D 2015 Understanding the friction and wear of KDP crystals by nanoscratching Wear 332–333 900–6

[150] [150] Rahaman M L and Zhang L C 2021 An investigation on the friction, wear and deformation of potassium dihydrogen phosphate Wear 476 203624

[151] [151] Li C, Zhang Y, Zhou G Z, Wei Z J and Zhang L C 2020 Theoretical modelling of brittle-to-ductile transition load of KDP crystals on (001) plane during nanoindentation and nanoscratch tests J. Mater. Res. Technol. 9 14142–57

[152] [152] Axinte D, Butler-Smith P, Akgun C and Kolluru K 2013 On the influence of single grit micro-geometry on grinding behavior of ductile and brittle materials Int. J. Mach. Tools Manuf. 74 12–18

[153] [153] Zhou H X, Qiu S, Zhang X Z and Xu C G 2012 Mechanical characteristics of soft-brittle HgCdTe single crystals investigated using nanoindentation and nanoscratching Appl. Surf. Sci. 258 9756–61

[154] [154] Li Y, Kang R K, Gao H and Wu D J 2010 Effect of mechanical anisotropy on grinding of CdZnTe wafers Mater. Manuf. Process. 25 412–7

[155] [155] Yang S Y, Zhang L C and Wu Z H 2021 An investigation on the nano-abrasion wear mechanisms of KDP crystals Wear 476 203692

[156] [156] Yang S Y, Zhang L C, Xie H T and Liu W D 2021 Interaction potential function for the deformation analysis of potassium dihydrogen phosphate using molecular dynamics simulation Comput. Mater. Sci. 187 110122

[157] [157] Zhang C L, Feng P F and Wang D 2012 The effect of crystallographic orientation on material removal behavior of (001) plane KDP crystal in nano-scratch test Proc. ASME 2012 Int. Mechanical Engineering Congress and Exposition. Volume 3: Design, Materials and Manufacturing, Parts A, B, and C (Houston, Texas, USA, 9–15 November 2012) (New York: ASME) pp 1883–9

[158] [158] Liu Q, Liao Z R and Axinte D 2020 Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale Int. J. Mach. Tools Manuf. 159 103620

[159] [159] ChenL,HuLC,XiaoC,QiYQ,Yu BJandQianLM2017 Effect of crystallographic orientation on mechanical removal of CaF2 Wear 376–377 409–16

[160] [160] Wu Y Q, Huang H and Zou J 2011 Transmission electron microscopy characterization of the deformation of CdZnTe single crystals induced by nanoscratching Scr. Mater. 65 392–5

[161] [161] Huang W H and Yan J W 2021 Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter Precis. Eng. 72 717–29

[162] [162] ZhangSH,GuoXG,JinZJ,KangRKandGuoDM2020 Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation model during nanoscratch process Tribol. Int. 143 106027

[163] [163] Huang L, Bonifacio C, Song D, Benthem K V, Mukherjee A K and Schoenung J M 2011 Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire Acta Mater. 59 5181–93

[164] [164] Li C, Zhang F H, Wu Y Q and Zhang X 2018 Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal Ceram. Int. 44 21486–98

[165] [165] Li C, Zhang F H and Piao Y 2019 Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal Ceram. Int. 45 15015–24

[166] [166] LTS Research Laboratories, Inc 2021 Safety data sheet cadmium zinc tellurium (available at: www.ltschem.com/ msds/CdZnTe.pdf)

[167] [167] The Toxin and Toxin Target Database 2021 Mercury cadmium telluride (T3D0347) (available at: http://www.t3db.ca/toxins/T3D0347)

[168] [168] National Center for Biotechnology Information 2022 PubChem compound summary for CID 62670, barium fluoride (available at: https://pubchem.ncbi.nlm.nih.gov/ compound/Barium-fluoride)

[169] [169] National Center for Biotechnology Information 2022 PubChem compound summary for CID 4298215, zinc selenide (ZnSe) (available at: https://pubchem.ncbi.nlm. nih.gov/compound/Zinc-selenide-_ZnSe)

[170] [170] National Center for Biotechnology Information 2022 PubChem compound summary for CID 516951, potassium dihydrogen phosphate (available at: https:// pubchem.ncbi.nlm.nih.gov/compound/516951)

[171] [171] National Center for Biotechnology Information 2022 PubChem compound summary for CID 84512, calcium fluoride (available at: https://pubchem.ncbi.nlm.nih.gov/ compound/Calcium-fluoride)

[172] [172] National Center for Biotechnology Information 2022 PubChem compound summary for CID 14821, zinc sulfide (available at: https://pubchem.ncbi.nlm.nih.gov/ compound/ZINC-sulfide)

[173] [173] Korzynski M 2007 Modeling and experimental validation of the force-surface roughness relation for smoothing burnishing with a spherical tool Int. J. Mach. Tools Manuf. 47 1956–64

[174] [174] Korzynski M, Lubas J, Swirad S and Dudek K 2011 Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended tool J. Mater. Process. Technol. 211 84–94

[175] [175] Li F L, Xia W, Zhou Z Y, Zhao J and Tang Z Q 2012 Analytical prediction and experimental verification of surface roughness during the burnishing process Int. J. Mach. Tools Manuf. 62 67–75

[176] [176] Teramachi A and Yan J W 2019 Improving the surface integrity of additive-manufactured metal parts by ultrasonic vibration-assisted burnishing J. Micro Nano-Manuf. 7 024501

[177] [177] Chueca De Bruijn A, Gómez-Gras G and Pérez M A 2021 On the effect upon the surface finish and mechanical performance of ball burnishing process on fused filament fabricated parts Addit. Manuf. 46 102133

[178] [178] Attabi S, Himour A, Laouar L and Motallebzadeh A 2021 Mechanical and wear behaviors of 316L stainless steel after ball burnishing treatment J. Mater. Res. Technol. 15 3255–67

[179] [179] Huang W H and Yan J W 2021 Chip-free surface patterning of toxic brittle polycrystalline materials through micro/nanoscale burnishing Int. J. Mach. Tools Manuf. 162 103688

[180] [180] PuC,DaiLD,LiHP, HuHY, LiuKX,YangLFand Hong M L 2019 Pressure-induced phase transitions of ZnSe under different pressure environments AIP Adv. 9 025004

[181] [181] Lai M, Zhang X D, Fang F Z and Bi M H 2017 Fundamental investigation on partially overlapped nano-cutting of monocrystalline germanium Precis. Eng. 49 160–8

[182] [182] Wang J S, Fang F Z and Zhang X D 2015 An experimental study of cutting performance on monocrystalline germanium after ion implantation Precis. Eng. 39 220–3

[183] [183] FangFZ,LaiM,WangJS,LuoXC,Yan JWandYan Y D 2022 Nanometric cutting: mechanisms, practices and future perspectives Int. J. Mach. Tools Manuf. 178 103905

[184] [184] XuWH et al 2022 Electrostatic atomization minimum quantity lubrication machining: from mechanism to application Int. J. Extreme Manuf. 4 042003

[185] [185] Kozlowski M R, Thomas I M, Edwards G J, Stanion K A, Fuchs B A and Latanich L 1991 Influence of diamond turning and surface cleaning processes on the degradation of KDP crystal surfaces Proc. SPIE 1561 59–69

[186] [186] Montesanti R C and Thompson S L 1995 A procedure for diamond turning KDP crystals USDOE Economic Regulatory Administration (Washington, DC) (https://doi. org/10.2172/105024)

[187] [187] Li L H, Wong H C and Lee R B 2020 Evaluation of a novel nanodroplet cutting fluid for diamond turning of optical polymers Polymers 12 2213

[188] [188] Tie G, Dai Y F, Guan C L, Zhu D C and Song B 2013 Research on full-aperture ductile cutting of KDP crystals using spiral turning technique J. Mater. Process. Technol. 213 2137–44