Journal of Applied Optics, Volume. 44, Issue 4, 711(2023)

Analysis of factors affecting beam shaping quality of geometric steady-phase method based on SLM

Zhongsheng ZHAI1...2,*, Lang DUAN1 and Yawen ZHENG1 |Show fewer author(s)
Author Affiliations
  • 1Hubei Key Laboratory of Modern Manufacturing Quality Engineering, School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
  • 2Hubei Key Laboratory of Intelligent Transportation Technology and Device, Huangshi 435000, China
  • show less
    Figures & Tables(15)
    Schematic diagram of beam shaping with geometric steady-phase method
    Optical path diagram of beam shaping experiment with geometric steady-phase method
    Experimental platform of beam shaping with geometric steady-phase method
    Pixel arrangement on liquid crystal surface of spatial light modulator
    Superimposed shining grating
    Application effect of Gaussian light (left column) and reshaped laser beam (right column)
    Simulation diagram of output spot when incident Gaussian beam misaligned with hologram
    Energy distribution of output spot when incident Gaussian beam misaligned with hologram
    Simulation diagram of output beam change during defocusing
    Variation of output beam during defocusing
    • Table 1. Comparison of experimental results and simulation results of beam shaping by geometric steady-phase method

      View table
      View in Article

      Table 1. Comparison of experimental results and simulation results of beam shaping by geometric steady-phase method

      参数仿真结果实验结果
      相位图
      光束表面轮廓
      剖面强度曲线
      光束均匀性/%98.383.9
      能量利用率/%98.991.3
    • Table 2. Comparison of experimental results with and without removing zero-order light

      View table
      View in Article

      Table 2. Comparison of experimental results with and without removing zero-order light

      参数移除零级光不移除零级光
      相位图
      光束表面轮廓
      剖面强度曲线
      光束均匀/%97.283.9
      能量利用率/%72.391.3
    • Table 3. Experimental results of square flat-top beam generated by three methods

      View table
      View in Article

      Table 3. Experimental results of square flat-top beam generated by three methods

      参数整形方法
      GSMRAF稳相法
      相位全息图
      光束表面轮廓
      剖面强度曲线
      光束均匀性/%83.687.297.2
      能量利用率/%69.261.272.3
    • Table 4. Simulation results of impact of mismatch for incident beam waist radius on shaping quality

      View table
      View in Article

      Table 4. Simulation results of impact of mismatch for incident beam waist radius on shaping quality

      参数输入束腰半径/mm
      3.03.33.63.94.2
      光束表面轮廓
    • Table 5. Experimental results of impact of mismatch for incident beam waist radius on shaping quality

      View table
      View in Article

      Table 5. Experimental results of impact of mismatch for incident beam waist radius on shaping quality

      参数输入束腰半径/mm
      3.03.33.63.94.2
      光束表面轮廓
      剖面强度曲线
    Tools

    Get Citation

    Copy Citation Text

    Zhongsheng ZHAI, Lang DUAN, Yawen ZHENG. Analysis of factors affecting beam shaping quality of geometric steady-phase method based on SLM[J]. Journal of Applied Optics, 2023, 44(4): 711

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Research Articles

    Received: Sep. 9, 2022

    Accepted: --

    Published Online: Aug. 10, 2023

    The Author Email: ZHAI Zhongsheng (zs.zhai@hbut.edu.cn)

    DOI:10.5768/JAO202344.0401002

    Topics