[1] [1] LEE H W. Manufacture of optical glass［J］. Nature,1942,150: 214-215.

[2] [2] GERVAIS L,DE ROOIJ N,DELAMARCHE E. Microfluidic chips for point-of-care immunodiagnostics［J］. Advanced Materials,2011,23(24): H151-H176.

[3] [3] ELVIRA K S,SOLVAS X C I,WOOTTON R C R,et al. The past,present and potential for microfluidic reactor technology in chemical synthesis［J］. Nature Chemistry,2013,5: 905-915.

[4] [4] MACFARLANE A,MARTIN G. A world of glass［J］. Science,2004,305(5689): 1407-1408.

[5] [5] LI B N,LI Z J,COOPERSTEIN I,et al. Additive manufacturing of transparent multi-component nanoporous glasses［J］. Advanced Science,2023,10(35): e2305775.

[6] [6] PILKINGTON L A B. Review lecture: the float glass process［J］. Proceedings of the Royal Society of London A Mathematical and Physical Sciences,1969,314(1516): 1-25.

[7] [7] GE X Q,LIU J,CHENG Z Q,et al. Research on forming mechanism and control of flat glass by overflow method［J］. Architectural and Industrial Glass,2022,8: 7-9 (in Chinese).

[8] [8] LIU C,QIAN B,NI R P,et al. 3D printing of multicolor luminescent glass［J］. RSC Advances,2018,8(55): 31564-31567.

[9] [9] LI Y,FENG Z Y,HUANG L J,et al. Additive manufacturing high performance graphene-based composites: a review［J］. Composites Part A: Applied Science and Manufacturing,2019,124: 105483.

[10] [10] MAYNARD A D. Navigating the fourth industrial revolution［J］. Nature Nanotechnology,2015,10: 1005-1006.

[11] [11] LI Y,FENG Z Y,HAO L,et al. A review on functionally graded materials and structures via additive manufacturing: from multi-scale design to versatile functional properties［J］. Advanced Materials Technologies,2020,5(6): 1900981.

[12] [12] KLEIN J,STERN M,FRANCHIN G,et al. Additive manufacturing of optically transparent glass［J］. 3D Printing and Additive Manufacturing,2015,2(3): 92-105.

[13] [13] LUO J J,GILBERT L J,QU C,et al. Additive manufacturing of transparent soda-lime glass using a filament-fed process［J］. Journal of Manufacturing Science and Engineering,2017,139(6): 061006.

[14] [14] PETERS D,DRALLMEIER J,BRISTOW D A,et al. Sensing and control in glass additive manufacturing［J］. Mechatronics,2018,56: 188-197.

[15] [15] NGUYEN D T,MEYERS C,YEE T D,et al. 3D-printed transparent glass［J］. Advanced Materials,2017,29(26): 1701181.

[16] [16] KOTZ F,ARNOLD K,BAUER W,et al. Three-dimensional printing of transparent fused silica glass［J］. Nature,2017,544: 337-339.

[17] [17] COOPERSTEIN I,SHUKRUN E,PRESS O,et al. Additive manufacturing of transparent silica glass from solutions［J］. ACS Applied Materials & Interfaces,2018,10(22): 18879-18885.

[18] [18] HONG Z H,YE P R,LOY D A,et al. High-precision printing of complex glass imaging optics with precondensed liquid silica resin［J］. Advanced Science,2022,9(18): 2105595.

[19] [19] DE MARZI A,GIOMETTI G,ERLER J,et al. Hybrid additive manufacturing for the fabrication of freeform transparent silica glass components［J］. Additive Manufacturing,2022,54: 102727.

[20] [20] TOOMBS J T,LUITZ M,COOK C C,et al. Volumetric additive manufacturing of silica glass with microscale computed axial lithography［J］. Science,2022,376(6590): 308-312.

[21] [21] LI M Z,YUE L,RAJAN A C,et al. Low-temperature 3D printing of transparent silica glass microstructures［J］. Science Advances,2023,9(40): 2958.

[22] [22] SHIM W. Apparatus and method for creating three-dimensional object: WO2014051250A1［P］. 2014-04-13.

[23] [23] TURNER B N,STRONG R,GOLD S A. A review of melt extrusion additive manufacturing processes: I. Process design and modeling［J］. Rapid Prototyping Journal,2014,20(3): 192-204.

[24] [24] CHOI Y H,KIM C M,JEONG H S,et al. Influence of bed temperature on heat shrinkage shape error in FDM additive manufacturing of the ABS-engineering plastic［J］. World Journal of Engineering and Technology,2016,4(3): 186-192.

[25] [25] SOARES J B,FINAMOR J,SILVA F P,et al. Analysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing［J］. Rapid Prototyping Journal,2018,24(8): 1305-1316.

[26] [26] FELISMINA R,SILVA M,MATEUS A,et al. Direct digital manufacturing: a challenge to the artistic glass production［J］. Springer International Publishing,2017,65: 221-231.

[27] [27] MADER M,HAMBITZER L,SCHLAUTMANN P,et al. Melt-extrusion-based additive manufacturing of transparent fused silica glass［J］. Advanced Science,2021,8(23): 2103180.

[28] [28] XIN C X,LI Z,HAO L,et al. A comprehensive review on additive manufacturing of glass: recent progress and future outlook［J］. Materials & Design,2023,227: 111736.

[29] [29] BAUDET E,LEDEMI Y,LAROCHELLE P,et al. 3D-printing of arsenic sulfide chalcogenide glasses［J］. Optical Materials Express,2019,9(5): 2307.

[30] [30] ZAKI R M,STRUTYNSKI C,KASER S,et al. Direct 3D-printing of phosphate glass by fused deposition modeling［J］. Materials & Design,2020,194: 108957.

[31] [31] TAO Y B,KONG F G,LI Z L,et al. A review on voids of 3D printed parts by fused filament fabrication［J］. Journal of Materials Research and Technology,2021,15: 4860-4879.

[32] [32] III J C,CALVERT P D. Freeforming objects with low-binder slurry: US6401795［P］. 2002-06-11.

[33] [33] CESARANO J I,BAER T A,CALVERT P. Recent developments in freeform fabrication of dense ceramics from slurry deposition［J］. Office of Scientific & Technical Information Technical Reports,1997.

[34] [34] ROCHA V G,SAIZ E,TIRICHENKO I S,et al. Direct ink writing advances in multi-material structures for a sustainable future［J］. Journal of Materials Chemistry A,2020,8(31): 15646-15657.

[35] [35] DESTINO J F,DUDUKOVIC N A,JOHNSON M A,et al. 3D printed optical quality silica and silica-titania glasses from sol-gel feedstocks［J］. Advanced Materials Technologies,2018,3(6): 1700323.

[36] [36] SASAN K,LANGE A,YEE T D,et al. Additive manufacturing of optical quality germania-silica glasses［J］. ACS Applied Materials & Interfaces,2020,12(5): 6736-6741.

[37] [37] DYLLA-SPEARS R,YEE T D,SASAN K,et al. 3D printed gradient index glass optics［J］. Science Advances,2020,6(47): 7429.

[38] [38] SONG K K,YANG S D,WEI Y F,et al. Coaxially printed biomimetic BSPC with high strength and toughness［J］. Materials & Design,2024,238: 112648.

[39] [39] AN T,HWANG K T,KIM J H,et al. Extrusion-based 3D direct ink writing of NiZn-ferrite structures with viscoelastic ceramic suspension［J］. Ceramics International,2020,46(5): 6469-6476.

[40] [40] LUO J J,GILBERT L J,BRISTOW D A,et al. Additive manufacturing of glass for optical applications［C］//SPIE LASE. Proc SPIE 9738,Laser 3D Manufacturing III,San Francisco,California,USA. 2016,9738: 123-131.

[41] [41] PROTASOV C E,KHMYROV R S,GRIGORIEV S N,et al. Selective laser melting of fused silica: interdependent heat transfer and powder consolidation［J］. International Journal of Heat and Mass Transfer,2017,104: 665-674.

[42] [42] KHMYROV R S,PROTASOV C E,GRIGORIEV S N,et al. Crack-free selective laser melting of silica glass: single beads and monolayers on the substrate of the same material［J］. The International Journal of Advanced Manufacturing Technology,2016,85(5): 1461-1469.

[43] [43] CHEN D Y,LIU K,LIU C,et al. Preparation of tellurite glass by 3D printing and its forming process［J］. Bulletin of the Chinese Ceramic Society,2019,38(9): 2890-2894 (in Chinese).

[44] [44] LIU K,XU J,GU X J,et al. Effects of raw material ratio and post-treatment on properties of soda lime glass-ceramics fabricated by selective laser sintering［J］. Ceramics International,2020,46(13): 20633-20639.

[45] [45] TAN C L,ZHOU K S,MA W Y,et al. Microstructural evolution,nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel［J］. Materials & Design,2017,134: 23-34.

[46] [46] FRAZIER W E. Metal additive manufacturing: a review［J］. Journal of Materials Engineering and Performance,2014,23(6): 1917-1928.

[47] [47] GIBSON I,ROSEN D,STUCKER B. Additive manufacturing technologies: 3D printing,rapid prototyping,and direct digital manufacturing［M］. New York: Springer New York,2015.

[48] [48] RODRIGUES T A,DUARTE V,MIRANDA R M,et al. Current status and perspectives on wire and arc additive manufacturing (WAAM)［J］. Materials,2019,12(7): 1121.

[49] [49] WYSOCKI B,MAJ P,SITEK R,et al. Laser and electron beam additive manufacturing methods of fabricating titanium bone implants［J］. Applied Sciences,2017,7(7): 657.

[50] [50] LUO J J,HOSTETLER J M,GILBERT L,et al. Additive manufacturing of transparent fused quartz［J］. Optical Engineering,2018,57(4): 041408.

[51] [51] SVETLIZKY D,DAS M,ZHENG B L,et al. Directed energy deposition (DED) additive manufacturing: physical characteristics,defects,challenges and applications［J］. Materials Today,2021,49: 271-295.

[52] [52] HULL C W. Apparatus for production of three-dimensional objects by stereolithography: US4575330A［P］. 1984-08-08.

[53] [53] OUYANG M,ZHANG H,LI M J,et al. 3D printing of luminescent glass with controlled distribution of emission colors for multi-dimensional optical anti-counterfeiting［J］. Laser & Photonics Reviews,2023,17(8): 2300068.

[54] [54] AMBROSI A,PUMERA M. 3D-printing technologies for electrochemical applications［J］. Chemical Society Reviews,2016,45(10): 2740-2755.

[55] [55] NAKAMOTO T,YAMAGUCHI K,ABRAHA A P. Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer［C］//MHS'96 Proceedings of the Seventh International Symposium on Micro Machine and Human Science. Nagoya,Japan. IEEE,2002: 53-58.

[56] [56] BERTSCH A,ZISSI S,JZQUEL J Y,et al. Microstereophotolithography using a liquid crystal display as dynamic mask-generator［J］. Microsystem Technologies,1997,3(2): 42-47.

[57] [57] CAI P,GUO L,WANG H,et al. Effects of slurry mixing methods and solid loading on 3D printed silica glass parts based on DLP stereolithography［J］. Ceramics International,2020,46(10): 16833-16841.

[58] [58] MOORE D G,BARBERA L,MASANIA K,et al. Three-dimensional printing of multicomponent glasses using phase-separating resins［J］. Nature Materials,2020,19: 212-217.

[59] [59] MAO Q J,WANG Y F,LI Y,et al. Fabrication of liver microtissue with liver decellularized extracellular matrix (dECM) bioink by digital light processing (DLP) bioprinting［J］. Materials Science & Engineering C,Materials for Biological Applications,2020,109: 110625.

[60] [60] PARTHENOPOULOS D A,RENTZEPIS P M. Two-photon volume information storage in doped polymer systems［J］. Journal of Applied Physics,1990,68(11): 5814-5818.

[61] [61] MARUO S,NAKAMURA O,KAWATA S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization［J］. Opt Lett,1997,22: 132-134.

[62] [62] KOTZ F,QUICK A S,RISCH P,et al. Two-photon polymerization of nanocomposites for the fabrication of transparent fused silica glass microstructures［J］. Advanced Materials,2021,33(9): e2006341.

[63] [63] WEN X W,ZHANG B Y,WANG W P,et al. 3D-printed silica with nanoscale resolution［J］. Nature Materials,2021,20: 1506-1511.

[64] [64] HONG Z H,YE P R,LOY D A,et al. Three-dimensional printing of glass micro-optics［J］. Optica,2021,8(6): 904.

[65] [65] BAUER J,CROOK C,BALDACCHINI T. A sinterless,low-temperature route to 3D print nanoscale optical-grade glass［J］. Science,2023,380(6648): 960-966.

[66] [66] DOUALLE T,ANDR J C,GALLAIS L. 3D printing of silica glass through a multiphoton polymerization process［J］. Optics Letters,2021,46(2): 364-367.

[67] [67] HUANG P H,LAAKSO M,EDINGER P,et al. Three-dimensional printing of silica glass with sub-micrometer resolution［J］. Nature Communications,2023,14: 3305.

[68] [68] MARSCHNER D E,PAGLIANO S,HUANG P H,et al. A methodology for two-photon polymerization micro 3D printing of objects with long overhanging structures［J］. Additive Manufacturing,2023,66: 103474.

[69] [69] YEUNG K W,DONG Y Q,CHEN L,et al. Printability of photo-sensitive nanocomposites using two-photon polymerization［J］. Nanotechnology Reviews,2020,9(1): 418-426.

[70] [70] WEISGRAB G,OVSIANIKOV A,COSTA P F. Functional 3D printing for microfluidic chips［J］. Advanced Materials Technologies,2019,4(10): 1900275.

[71] [71] GAL-OR E,GERSHONI Y,SCOTTI G,et al. Chemical analysis using 3D printed glass microfluidics［J］. Analytical Methods,2019,11(13): 1802-1810.