Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 9, 3386(2024)

Ceramic Slabs Prepared Using Different Flux System and Its Properties

ZHAO Cunhe1...2, NIE Guanglin1,2,*, LIU Yijun1,2, ZUO Fei3, PANG Weike1,2, WANG Qinggang1,2 and BAO Yiwang4 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • 4[in Chinese]
  • show less
    References(33)

    [4] [4] ISO/TC 189. Ceramic tiles: definitions, classification, characteristics and marking: ISO 13006:2018(E)[S]. Switzerland: International Organization for Standardization, 2018.

    [7] [7] DA SILVA A L, FELTRIN J, DAL B M, et al. Effect of reduction of thickness on microstructure and properties of porcelain stoneware tiles[J]. Ceramics International, 2014, 40(9): 14693-14699.

    [9] [9] LEONELLI C, BONDIOLI F, VERONESI P, et al. Enhancing the mechanical properties of porcelain stoneware tiles[J]. Journal of the European Ceramic Society, 2001, 21(6): 785-793.

    [10] [10] PREZ J M, RINCN J M, ROMERO M. Effect of moulding pressure on microstructure and technological properties of porcelain stoneware[J]. Ceramics International, 2012, 38(1): 317-325.

    [11] [11] BRAGANA S R, BERGMANN C P, HBNER H. Effect of quartz particle size on the strength of triaxial porcelain[J]. Journal of the European Ceramic Society, 2006, 26(16): 3761-3768.

    [12] [12] GIL C, PEIR M C, GMEZ J J, et al. Study of porosity in porcelain tile bodies[J]. Proceedings Qualicer, 2006: 43-48.

    [13] [13] TAI W P, KIMURA K, JINNAI K. Fabrication of new porcelain body using nonplastic raw materials by slip casting[J]. Journal of Materials Science, 2002, 37(6): 1273-1279.

    [14] [14] SNCHEZ E, GARCA-TEN J, SANZ V, et al. Porcelain tile: almost 30 years of steady scientific-technological evolution[J]. Ceramics International, 2010, 36(3): 831-845.

    [15] [15] CORREIA S L, OLIVEIRA A P N, HOTZA D, et al. Properties of triaxial porcelain bodies: interpretation of statistical modeling[J]. Journal of the American Ceramic Society, 2006, 89(11): 3356-3365.

    [16] [16] BRAGANA S R, BERGMANN C P. Effect of quartz of fine particle size on porcelain properties[J]. Materials Science Forum, 2006, 530/531: 493-498.

    [17] [17] MARTN-MRQUEZ J, RINCN J M, ROMERO M. Effect of microstructure on mechanical properties of porcelain stoneware[J]. Journal of the European Ceramic Society, 2010, 30(15): 3063-3069.

    [19] [19] KAMOCHI N, NISHIYAMA K, KATSUKI H. Effect of talc addition on pyroplastic deformation of an alumina strengthened porcelain[J]. Journal of the Ceramic Society of Japan, 2016, 124(8): 787-790.

    [20] [20] TURKMEN O, KUCUK A, AKPINAR S. Effect of wollastonite addition on sintering of hard porcelain[J]. Ceramics International, 2015, 41(4): 5505-5512.

    [21] [21] ISO/TC 189. Ceramic tiles-Part 3: determination of water absorption, apparent porosity, apparent relative density and bulk density: ISO 10545-3:2018(E)[S]. Switzerland: International Organization for Standardization, 2018.

    [22] [22] ISO/TC 189. Ceramic tiles-Part 4: determination of modulus of rupture and breaking strength: ISO 10545-4:2019(E)[S]. Switzerland: International Organization for Standardization, 2019.

    [24] [24] DELAGE J, SAIZ E, AL NASIRI N. Fracture behaviour of SiC/SiC ceramic matrix composite at room temperature[J]. Journal of the European Ceramic Society, 2022, 42(7): 3156-3167.

    [25] [25] MEI H, SUN Y Y, ZHANG L D, et al. Acoustic emission characterization of fracture toughness for fiber reinforced ceramic matrix composites[J]. Materials Science and Engineering: A, 2013, 560: 372-376.

    [26] [26] COLDEA A, SWAIN M V, THIEL N. Mechanical properties of polymer-infiltrated-ceramic-network materials[J]. Dental Materials, 2013, 29(4): 419-426.

    [27] [27] NARA S, KOMIYA T. Studies on the relationship between water-satured state and crystallinity by the diffraction method for moistened potato starch[J]. Starch-Strke, 1983, 35(12): 407-410.

    [28] [28] ZHU H B, LI H, LI Z X. Plasma sprayed TiB2-Ni cermet coatings: effect of feedstock characteristics on the microstructure and tribological performance[J]. Surface and Coatings Technology, 2013, 235: 620-627.

    [29] [29] PENG L H, QIN S. Sintering behavior and technological properties of low-temperature porcelain tiles prepared using a lithium ore and silica crucible waste[J]. Minerals, 2019, 9: 731.

    [30] [30] TASKIRAN M U, DEMIRKOL N, CAPOGLU A. A new porcelainised stoneware material based on anorthite[J]. Journal of the European Ceramic Society, 2005, 25(4): 293-300.

    [31] [31] ABADIR M F, SALLAM E H, BAKR I M. Preparation of porcelain tiles from Egyptian raw materials[J]. Ceramics International, 2002, 28(3): 303-310.

    [32] [32] ROMERO M, PREZ J M. Relation between the microstructure and technological properties of porcelain stoneware: a review[J]. Materiales De Construcción, 2015, 65(320): e065.

    [33] [33] JIANG F, LI Y, ZHAO L H, et al. Novel ceramics prepared from inferior clay rich in CaO and Fe2O3: properties, crystalline phases evolution and densification process[J]. Applied Clay Science, 2017, 143: 199-204.

    [35] [35] WATTANASIRIWECH S, WATTANASIRIWECH D. Roles of talc-illite on phase transformation, vitrification and physical properties of a triaxial porcelain body[J]. Journal of Ceramic Processing Research, 2019, 20(6): 643-648.

    [36] [36] AMIG J. X-ray powder diffraction phase analysis and thermomechanical properties of silica and alumina porcelains[J]. Journal of the European Ceramic Society, 2004, 24(1): 75-81.

    [37] [37] DUDDI D, SINGH G P, KALRA S, et al. XRD and SEM study of alumina silicate porcelain insulator[C]//AIP Conference Proceedings. Bikaner, India: 2018.

    [38] [38] MARTN-MRQUEZ J, RINCN J M, ROMERO M. Effect of firing temperature on sintering of porcelain stoneware tiles[J]. Ceramics International, 2008, 34(8): 1867-1873.

    [39] [39] RANACHOWSKI P, REJMUND F, RANACHOWSKI Z, et al. Evaluation of the ml lute hypothesis in respect of electrotec hnical porcelains[J]. Archives of Metallurgy and Materials, 2013, 58(4): 1177-1181.

    [40] [40] OLUPOT P W, JONSSON S, BYARUHANGA J K. Development and characterisation of triaxial electrical porcelains from Ugandan ceramic minerals[J]. Ceramics International, 2010, 36(4): 1455-1461.

    [41] [41] CONTRERAS J E, TAHA-TIJERINA J, LPEZ-PERALES J F, et al. Enhancing the quartz-clay-feldspar system by nano-Al2O3 addition for electrical insulators: from laboratory to prototype scale[J]. Materials Chemistry and Physics, 2021, 263: 124389.

    [44] [44] ZANELLI C, RAIMONDO M, GUARINI G, et al. The vitreous phase of porcelain stoneware: composition, evolution during sintering and physical properties[J]. Journal of Non-Crystalline Solids, 2011, 357(16/17): 3251-3260.

    Tools

    Get Citation

    Copy Citation Text

    ZHAO Cunhe, NIE Guanglin, LIU Yijun, ZUO Fei, PANG Weike, WANG Qinggang, BAO Yiwang. Ceramic Slabs Prepared Using Different Flux System and Its Properties[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(9): 3386

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Feb. 2, 2024

    Accepted: --

    Published Online: Nov. 5, 2024

    The Author Email: Guanglin NIE (buildingmaterials8@163.com)

    DOI:

    CSTR:32186.14.

    Topics