[1] [1] 张奇， 牛廉政， 范亚南， 等. 机器人关节扭矩测试传感器的设计［J］. 传感技术学报， 2020， 33（4）： 506-510. doi: 10.3969/j.issn.1004-1699.2020.04.005ZHANGQ， NIUL Z， FANY N， et al. Design of robot joint torque measurement sensor［J］. Chinese Journal of Sensors and Actuators， 2020， 33（4）： 506-510.（in Chinese）. doi: 10.3969/j.issn.1004-1699.2020.04.005

[2] M PERRONE, S P MELL, J MARTIN et al. Machine learning-based prediction of hip joint moment in healthy subjects， patients and post-operative subjects. Computer Methods in Biomechanics and Biomedical Engineering, 1-5(2024).

[3] [3] 马志举， 吴海彬. 无外部传感器的机器人碰撞检测［J］. 测试技术学报， 2013， 27（3）： 254-259. doi: 10.3969/j.issn.1671-7449.2013.03.014MAZ J， WUH B. Sensorless collision detection for robot manipulator［J］. Journal of Test and Measurement Technology， 2013， 27（3）： 254-259.（in Chinese）. doi: 10.3969/j.issn.1671-7449.2013.03.014

[4] [4] 姚斌， 张建勋， 代煜， 等. 用于微创外科手术机器人的多维力传感器解耦方法研究［J］. 仪器仪表学报， 2020， 41（1）： 147-153. doi: 10.19650/j.cnki.cjsi.J1905479YAOB， ZHANGJ X， DAIY， et al. Research on decoupling method of multi-dimensional force sensor used in minimally invasive surgical robot［J］. Chinese Journal of Scientific Instrument， 2020， 41（1）： 147-153.（in Chinese）. doi: 10.19650/j.cnki.cjsi.J1905479

[5] B FU, G W CAI. Design and calibration of a joint torque sensor for robot compliance control. IEEE Sensors Journal, 21, 21378-21389(2021).

[6] H W ZHANG, S AHMAD, G J LIU. Torque estimation for robotic joint with harmonic drive transmission based on position measurements. IEEE Transactions on Robotics, 31, 322-330(2015).

[7] [7] 杨聪彬， 郭庆旭， 刘志峰， 等. 谐波传动柔轮变形测量误差分析与补偿［J］. 光学 精密工程， 2021， 29（4）： 793-801. doi: 10.37188/ope.20212904.0793YANGC B， GUOQ X， LIUZ F， et al. Research on error analysis and compensation method for deformation measurement of flexible wheel of harmonic drive［J］. Opt. Precision Eng.， 2021， 29（4）： 793-801.（in Chinese）. doi: 10.37188/ope.20212904.0793

[8] [8] 王雪竹， 崔龙， 李洪谊， 等. 谐波力矩测量技术分析和优化设计［J］. 宇航学报， 2015， 36（8）： 885-892. doi: 10.3873/j.issn.10001328.2015.08.004WANGX Z， CUIL， LIH Y， et al. Analysis and optimization of torque measurement technique for harmonic drive［J］. Journal of Astronautics， 2015， 36（8）： 885-892.（in Chinese）. doi: 10.3873/j.issn.10001328.2015.08.004

[9] M HASHIMOTO, Y KIYOSAWA, R P PAUL. A torque sensing technique for robots with harmonic drives. IEEE Transactions on Robotics and Automation, 9, 108-116(1993).

[10] H D TAGHIRAD, P R BELANGER. Torque ripple and misalignment torque compensation for the built-in torque sensor of harmonic drive systems. IEEE Transactions on Instrumentation and Measurement, 47, 309-315(1998).

[11] H D TAGHIRAD, A HELMY, P R BELANGER. Intelligent built-in torque sensor for harmonic drive systems, 969-974(1997).

[12] I GODLER, M HORIUCHI, M HASHIMOTO et al. Accuracy improvement of built-in torque sensing for Harmonic Drives. IEEE/ASME Transactions on Mechatronics, 5, 360-366(2000).

[13] I GODLER, M HASHIMOTO, M HORIUCHI et al. Performance of gain-tuned harmonic drive torque sensor under load and speed conditions. IEEE/ASME Transactions on Mechatronics, 6, 155-160(2001).

[14] I GODLER. A method to compensate periodic errors by gain tuning in instrumentation. IEEE Transactions on Instrumentation and Measurement, 51, 37-42(2002).

[15] B J JUNG, B KIM, J C KOO et al. Joint torque sensor embedded in harmonic drive using order tracking method for robotic application. IEEE/ASME Transactions on Mechatronics, 22, 1594-1599(2017).

[16] [16] 潘新安， 王洪光， 姜勇. 一种机器人谐波减速器内嵌扭矩传感器的研制［J］. 仪器仪表学报， 2014， 35（1）： 154-161. doi: 10.3969/j.issn.0254-3087.2014.01.022PANX A， WANGH G， JIANGY. Development of a built-in torque sensor in harmonic drive gears for robots［J］. Chinese Journal of Scientific Instrument， 2014， 35（1）： 154-161.（in Chinese）. doi: 10.3969/j.issn.0254-3087.2014.01.022

[17] [17] 马罗文， 刘宁， 胡心语， 等. FFT幅相联合的快速高精度频率估计方法［J］. 计测技术， 2022， 42（6）： 34-39. doi: 10.11823/j.issn.1674-5795.2022.06.05MAL W， LIUN， HUX Y， et al. Fast and high-precision frequency estimation via the combination of FFT amplitude and phase information［J］. Metrology & Measurement Technology， 2022， 42（6）： 34-39.（in Chinese）. doi: 10.11823/j.issn.1674-5795.2022.06.05