[1] [1] GAO J, HUANG P L, WEN ZH, et al.. Residual error compensation of in situ inspection system for precision machining of complex components［J］. Journal of Mechanical Engineering, 2016, 52(15): 139-146. (in Chinese)

[2] [2] MORONI G, PETR S. Geometric Inspection Planning as a Key Element in Industry 4.0［M］Lecture Notes in Mechanical Engineering. Cham: Springer International Publishing, 2018: 293-310.

[3] [3] KAM C L.A geometric decomposition methods for part programming of CMMS ［C］. Proceeding of Auto Fact Europe Conference, 1983: 13-15.

[4] [4] LU W L, PAGANI L, ZHOU L P, et al.. Uncertainty-guided intelligent sampling strategy for high-efficiency surface measurement via free-knot B-spline regression modelling［J］. Precision Engineering, 2019, 56: 38-52.

[5] [5] OBEIDAT S M, RAMAN S. An intelligent sampling method for inspecting free-form surfaces［J］. The International Journal of Advanced Manufacturing Technology, 2009, 40(11/12): 1125-1136.

[6] [6] WU SH, LI R Y, LIU X L, et al.. On-machine measurement method of processing error based on the mould surface adaptive sampling［J］. Chinese Journal of Scientific Instrument, 2016, 37(1): 83-90. (in Chinese)

[7] [7] LAI J T, FU J ZH, SHEN H Y, et al.. Measuring points optimization in machining error inspection based on reconstruction of NURBS control points driven by sensitive points［J］. Journal of Zhejiang University: Engineering Science, 2015, 49(7): 1201-1207. (in Chinese)

[8] [8] WEN X L, WANG D X, ZHU X CH, et al.. Sampling strategy for free-form surface inspection by using coordinate measuring machines［J］. Opt. Precision Eng., 2014, 22(10): 2725-2732. (in Chinese)

[9] [9] ZAHMATI J, AMIRABADI H, MEHRAD V. A hybrid measurement sampling method for accurate inspection of geometric errors on freeform surfaces［J］. Measurement, 2018, 122: 155-167.

[10] [10] DUAN L M, YANG SH P, ZHANG X, et al.. Collapsing simplification of triangular mesh based on genetic algorithm［J］. Opt. Precision Eng., 2018, 26(6): 1489-1496. (in Chinese)

[11] [11] DUAN L M, SHAO H, LI ZH M, et al.. Simplification method for feature preserving of efficient triangular mesh model［J］. Opt. Precision Eng., 2017, 25(2): 460-468. (in Chinese)

[12] [12] SHENG X, HIRSCH B E. Triangulation of trimmed surfaces in parametric space［J］. Computer-Aided Design, 1992, 24(8): 437-444.

[13] [13] ZHOU M Q, YUAN J, GENG G H, et al.. Interactive reassembly of fractured fragments based on feature points of contour line［J］. Opt. Precision Eng., 2017, 25(6): 1597-1606. (in Chinese)

[14] [14] JI ZH P, LIU L G, WANG G J. Mesh simplification based on local polynomial fitting［J］. Journal of Zhejiang Universityl: Engineering Science, 2006, 40(12): 2083-2087. (in Chinese)