Journal of the Chinese Ceramic Society, Volume. 51, Issue 8, 1920(2023)

Constitutive Model and Failure Criteria of Alkali-Activated Concrete Under Confining Pressure

LIU Shan1... SHI Xiaobei1 and HAO Yifei2 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    References(31)

    [1] [1] GKE H S, TUYAN M, NEHDI M L. Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: a critical review[J]. Constr Build Mater, 2021, 303: 124483.

    [3] [3] PASUPATHY K, SINGH CHEEMA D, SANJAYAN J. Durability performance of fly ash-based geopolymer concrete buried in saline environment for 10years[J]. Constr Build Mater, 2021, 281: 122596.

    [4] [4] BATUECAS E, RAMN-LVAREZ I, SNCHEZ-DELGADO S, et al. Carbon footprint and water use of alkali-activated and hybrid cement mortars[J]. J Clean Prod, 2021, 319: 128653.

    [8] [8] NATH P, SARKER P K. Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete[J]. Constr Build Mater, 2017, 130: 22-31.

    [9] [9] PAN Z, SANJAYAN J G, RANGAN B V. Fracture properties of geopolymer paste and concrete[J]. Mag Concr Res, 2011, 63(10): 763-771.

    [10] [10] CHEN P, CUI X M, ZHENG H J, et al. A mesoscale study on the dilation of actively confined concrete under axial compression[J]. Materials (Basel), 2022, 15(18): 6490.

    [11] [11] LIU P F, LIU K, ZHANG Q B. Experimental characterisation of mechanical behaviour of concrete-like materials under multiaxial confinement and high strain rate[J]. Constr Build Mater, 2020, 258: 119638.

    [13] [13] LYU S J, HSIAO Y H, WANG T T, et al. Microstructure of geopolymer accounting for associated mechanical characteristics under various stress states[J]. Cem Concr Res, 2013, 54: 199-207.

    [14] [14] NASVI M C M, RANJITH P G, SANJAYAN J. A numerical study of triaxial mechanical behaviour of geopolymer at different curing temperatures: an application for geological sequestration wells[J]. J Nat Gas Sci Eng, 2015, 26: 1148-1160.

    [15] [15] HAIDER G M, SANJAYAN J G, RANJITH P G. Complete triaxial stress-strain curves for geopolymer[J]. Constr Build Mater, 2014, 69: 196-202.

    [16] [16] KHAN M Z N, HAO Y F, HAO H, et al. Mechanical properties of ambient cured high-strength plain and hybrid fiber reinforced geopolymer composites from triaxial compressive tests[J]. Constr Build Mater, 2018, 185: 338-353.

    [17] [17] ZHENG J J, LI C Q, ZHOU X Z. Characterization of microstructure of interfacial transition zone in concrete[J]. ACI Mater J, 2005, 102(4): 265-271.

    [18] [18] FENG M Y, WANG Z, WU L C. Experimental study on high-strength concrete, ultrahigh-strength concrete and corresponding mortar under triaxial compression[J].Arab J Sci Eng, 2021, 46(11): 11179-11194.

    [20] [20] GHOLAMPOUR A, OZBAKKALOGLU T, NG C T. Ambient- and oven-cured geopolymer concretes under active confinement[J]. Constr Build Mater, 2019, 228: 116722.

    [21] [21] LIM J C, OZBAKKALOGLU T. Stress-strain model for normal- and light-weight concretes under uniaxial and triaxial compression[J]. Constr Build Mater, 2014, 71: 492-509.

    [22] [22] FARNAM Y, MOOSAVI M, SHEKARCHI M, et al. Behaviour of slurry infiltrated fibre concrete (SIFCON) under triaxial compression[J]. Cem Concr Res, 2010, 40(11): 1571-1581.

    [23] [23] ANSARI F, LI Q. High-strength concrete subjected to triaxial compression[J]. ACI Mater J, 1998, 95(6): 747-755.

    [24] [24] LIU S, HAO Y F, MA G W. Approaches to enhance the carbonation resistance of fly ash and slag based alkali-activated mortar- experimental evaluations[J]. J Clean Prod, 2021, 280: 124321.

    [26] [26] CHEN Y L, CHEN Z P, XU J J, et al. Performance evaluation of recycled aggregate concrete under multiaxial compression[J]. Constr Build Mater, 2019, 229: 116935.

    [27] [27] MALECOT Y, ZINGG L, BRIFFAUT M, et al. Influence of free water on concrete triaxial behavior: the effect of porosity[J]. Cem Concr Res, 2019, 120: 207-216.

    [28] [28] TIJANI I A, WU Y F, LIM C W. Aggregate size effects and general static loading response on mechanical behavior of passively confined concrete[J]. Constr Build Mater, 2019, 205: 61-72.

    [29] [29] WANG Y R, CAO Y B, ZHANG Z H, et al. Study of acidic degradation of alkali-activated materials using synthetic C-(N)-A-S-H and N-A-S-H gels[J]. Compos B Eng, 2022, 230: 109510.

    [30] [30] DAVIDOVITS J. Geopolymers[J]. J Therm Anal, 1991, 37(8): 1633-1656.

    [31] [31] XIAO Q G, TENG J G, YU T. Behavior and modeling of confined high-strength concrete[J]. J Compos Constr, 2010, 14(3): 249-259.

    [32] [32] LEE N K, LEE H K. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature[J]. Constr Build Mater, 2013, 47: 1201-1209.

    [33] [33] International Federation For Structural Concrete. Fib Model Code for Concrete Structures[M]. Lausanne, Switzerland, Wiley, 2013: 75-82.

    [35] [35] MENG E C, YU Y L, ZHANG X G, et al. Experimental and theoretical research on the mechanical performance of totally recycled concrete under triaxial compression after high temperatures[J]. Constr Build Mater, 2020, 261: 120012.

    [36] [36] WANG H L, WU Y H, WEI M, et al. Hysteretic behavior of geopolymer concrete with active confinement subjected to monotonic and cyclic axial compression: an experimental study[J]. Materials (Basel), 2020, 13(18): 3997.

    [37] [37] IMRAN I, PANTAZOPOULOU S J. Experimental study of plain concrete under triaxial stress[J]. ACI Mater J, 1996, 93(6): 589-601.

    [38] [38] BABANAJAD S K, FARNAM Y, SHEKARCHI M. Failure criteria and triaxial behaviour of HPFRC containing high reactivity metakaolin and silica fume[J]. Constr Build Mater, 2012, 29: 215-229.

    [39] [39] YU F, SUN D Q, SUN G Q, et al. A modified mix design method for pervious concrete based on Mohr-Coulomb failure criterion[J]. Constr Build Mater, 2021, 269: 121801.

    Tools

    Get Citation

    Copy Citation Text

    LIU Shan, SHI Xiaobei, HAO Yifei. Constitutive Model and Failure Criteria of Alkali-Activated Concrete Under Confining Pressure[J]. Journal of the Chinese Ceramic Society, 2023, 51(8): 1920

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Oct. 8, 2022

    Accepted: --

    Published Online: Oct. 7, 2023

    The Author Email:

    DOI:

    CSTR:32186.14.

    Topics