Optics and Precision Engineering, Volume. 30, Issue 23, 3021(2022)
Measurement and calibration of optical axis changes caused by gravity for ground-based large-aperture telescope
[1] BELY P Y[M]. The Design and Construction of Large Optical Telescopes(2003).
[2] WILSON R N, FRANZA F, NOETHE L et al. Active optics[J]. Journal of Modern Optics, 38, 219-243(1991).
[3] GUISARD S, NOETHE L, SPYROMILIO J. Performance of active optics at the VLT[C], 4003, 154-164(2000).
[4] BORTOLETTO F, FANTINEL D, RAGAZZONI R et al. Active optics handling inside Galileo Telescope[C]. Kona, 2199, 212-222(1994).
[5] SCHIPANI P, D’ORSI S, FIERRO D et al. Active optics control of VST telescope secondary mirror[J]. Applied Optics, 49, 3199-3207(2010).
[6] PERNECHELE C, BORTOLETTO F, REIF K. Position control for active secondary mirror of a two-mirror telescope[C], 3112, 172-180(97).
[7] SCHIPANI P, PERROTTA F, MOLFESE C et al. The VST secondary mirror support system[C], 7018, 1380-1389(2008).
[8] SCHIPANI P, D'ORSI S, FIERRO D et al. Performance of the VST secondary mirror support system[C], 7739, 1102-1110(2010).
[9] HILEMAN E A, ELIAS J, JOYCE R et al. Passive compensation of gravity flexure in optical instruments[C], 5495, 622-635(2004).
[10] WANG H, ZHAO Y X. Pointing model for LAMOST experiment set[C], 6267, 1157-1164(2006).
[11] MEEKS R L. Sources of uncertainty in telescope pointing models[C], 5497, 140-148(2004).
[12] [12] 12李振伟, 杨文波, 张楠. 水平式光电望远镜静态指向误差的修正[J]. 中国光学, 2015, 8(2): 263-269. doi: 10.3788/CO.20150802.0263LIZH W, YANGW B, ZHANGN. Static pointing error of level mounting optoelectronic telescope[J]. Chinese Optics, 2015, 8(2): 263-269. (in Chinese). doi: 10.3788/CO.20150802.0263
[13] KEITZER S A, KIMBRELL J E, GREENWALD D. Deterministic errors in pointing and tracking systems I: identification and correction of static errors[C], 1482, 406-414(91).
[14] WALLACE P T. Rigorous algorithm for telescope pointing[C]. Hawai'i, 4848, 125-136(2002).
[15] [15] 15柳光乾, 校启公, 邓林华, 等. 1m太阳望远镜光轴变化检测与改正[J]. 中国激光, 2013, 40(1): 206-211. doi: 10.3969/j.issn.1672-7673.2013.02.012LIUG Q, XIAOQ G, DENGL H, et al. Detection and calibration of optical axes change for one meter solar telescope[J]. Chinese Journal of Lasers, 2013, 40(1): 206-211. (in Chinese). doi: 10.3969/j.issn.1672-7673.2013.02.012
[16] [16] 16周超, 杨洪波, 吴小霞, 等. 地基大口径望远镜结构的性能分析[J]. 光学 精密工程, 2011, 19(1): 138-145. doi: 10.3788/OPE.20111901.0138ZHOUCH, YANGH B, WUX X, et al. Structural analysis of ground-based large telescopes[J]. Opt. Precision Eng., 2011, 19(1): 138-145. (in Chinese). doi: 10.3788/OPE.20111901.0138
[17] [17] 17车鑫, 贾平, 田大鹏. 机载光电载荷视轴指向控制技术综述[J]. 光学 精密工程, 2018, 26(7): 1642-1652.CHEX, JIAP, TIAND P. A survey of line of sight control technology for airborne photoelectric payload[J]. Opt. Precision Eng., 2018, 26(7): 1642-1652. (in Chinese)
[18] [18] 18胡守伟, 宋晓莉, 张惠. 巨型望远镜方位轴系的集成系统[J]. 光学 精密工程, 2018, 26(4): 850-856.HUSH W, SONGX L, ZHANGH. Integrated system of azimuth structure for extremely large telescopes[J]. Opt. Precision Eng., 2018, 26(4): 850-856. (in Chinese)
[19] [19] 19程向明, 陈林飞, 许骏, 等. YNST光电导行镜机械设计[J]. 天文研究与技术, 2011, 8(2): 196-204. doi: 10.3969/j.issn.1672-7673.2011.02.015CHENGX M, CHENL F, XUJ, et al. Mechanical design of the auto-Guiding telescope of the YNST[J]. Astronomical Research & Technology, 2011, 8(2): 196-204. (in Chinese). doi: 10.3969/j.issn.1672-7673.2011.02.015
[20] HUSSAIN G, IKRAM M. Optical measurements of angle and axis of rotation[J]. Optics Letters, 33, 2419-2421(2008).
[21] MORETTO G, KUHN J R. Optical performance of the 6.5-m off-axis new planetary telescope[J]. Applied Optics, 39, 2782-2789(2000).
[22] [22] 22张雏, 周冰, 沈学举, 段晓峰. 精确校正激光测距仪三光轴平行的理论计算方法研究[J]. 光学 精密工程, 2002, 10(6): 650-654. doi: 10.3321/j.issn:1004-924X.2002.06.023ZHANGCH, ZHOUB, SHENX J, et al. Study of the calculation method for accurately adjusting laser-range-finder's three-optic-axes to parallel to each other[J]. Opt. Precision Eng., 2002, 10(6): 650-654. (in Chinese). doi: 10.3321/j.issn:1004-924X.2002.06.023
[23] [23] 23张桢君, 王建成, 程向明, 等. 多功能天文经纬仪光轴指向变化实测与修正[J]. 光学 精密工程, 2019, 27(11): 2321-2329.ZHANGZH J, WANGJ CH, CHENGX M, et al. Measurement and calibration of optical axis changes for multi-function astronomical theodolite[J]. Opt. Precision Eng., 2019, 27(11): 2321-2329. (in Chinese)
[24] [24] 24曹玉岩, 王建立, 陈涛, 等. 基于Hexapod平台的地基大型光学望远镜失调误差主动补偿[J]. 光学 精密工程, 2020, 28(11): 2452-2465. doi: 10.37188/OPE.20202811.2452CAOY Y, WANGJ L, CHENT, et al. Active compensation of aberration for large ground-based telescope based on Hexapod platform[J]. Opt. Precision Eng., 2020, 28(11): 2452-2465. (in Chinese). doi: 10.37188/OPE.20202811.2452
[25] REN B C, JIN G, ZHONG X. Third-order coma-free point in two-mirror telescopes by a vector approach[J]. Applied Optics, 50, 3918-3923(2011).
Get Citation
Copy Citation Text
Honghao WANG, Jianli WANG, Tao CHEN, Yuyan CAO, Baogang CHEN. Measurement and calibration of optical axis changes caused by gravity for ground-based large-aperture telescope[J]. Optics and Precision Engineering, 2022, 30(23): 3021
Received: Oct. 18, 2022
Accepted: --
Published Online: Jan. 10, 2023
The Author Email: Honghao WANG (whh_hit@163.com)