[1] Qiang Li, Chenguang Guo, Guangshuo Ding, . Research on milling subsurface layer damages of DD5 Ni-based single crystal superalloy. China Mechanical Engineering, 31, 2638-2645(2020).

[2] Hongyou Bian, Tengda Di, Shijie Wang, et al. Microstructure and wear properties of laser deposition repaired DZ125 alloy. Rare Metal Materials and Engineering, 49, 2039-2045(2020).

[3] Zhipeng Zhou, Lan Huang, Yijing Shang, et al. Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing. Materials & Design, 160, 1238-1249(2018).

[4] Jun Xue, Jiantao Feng, Changzheng Ma, . Influence of laser shock peening on microstructure and oxidation resistance of laser additive manufactured TC4 titanium alloy. Chinese Optics, 11, 198-205(2018).

[5] Yanzhou Li, Yan Shi. Microstructure and corrosion resistance of AlCrFeCoNiCu high-entropy coating by laser deposition on an aluminum alloy. Chinese Optics, 12, 344-354(2019).

[6] Guangfeng Yang, Feng Gao, Jing Cui, et al. Effect of scanning speed on microstructure and properties of 300M steel cladding C276 coating. Infrared and Laser Engineering, 52, 20220328(2023).

[7] Yanzhou Li, Yan Shi. Microstructure and process optimization of AlCrFeCoNiCu high-entropy alloy by laser deposition. Optics and Precision Engineering, 27, 795-806(2019).

[8] Chongliang Fu, Jinbao Fu, Yalin Ding, . Porosity control of Inconel 718 in high deposition-rate laser metal deposition. Optics and Precision Engineering, 23, 3005-3011(2015).

[9] Hao Chen, Yuanyuan Lu, Deng Luo, et al. Epitaxial laser deposition of single crystal Ni-based superalloys: repair of complex geometry. Journal of Materials Processing Technology, 285, 116782(2020).

[10] M Gäumann, S Henry, F Cléton, et al. Epitaxial laser metal forming: analysis of microstructure formation. Materials Science & Engineering A, 271, 232-241(1999).

[11] M Gäumann, P Bezençon, W Canalis, et al. Single-crystal laser deposition of superalloys: processing-microstructure maps. Acta Materialia, 49, 1051-1062(2001).

[12] S Kaierle, L Overmeyer, I Alfred, et al. Single-crystal turbine blade tip repair by laser cladding and remelting. CIRP Journal of Manufacturing Science and Technology, 19, 196-199(2017).

[13] Peng Rong, Jiachen Guo. Effect of substrate orientation on formation of heterocrystals in laser cladding zone. Chinese Journal of Lasers, 48, 0602110(2021).

[14] Jianwen Nie, Chaoyue Chen, Longtao Liu, et al. Effect of substrate cooling on the epitaxial growth of Ni-based single-crystal superalloy fabricated by direct energy deposition. Journal of Materials Science & Technology, 62, 148-161(2021).

[15] Yaojian Liang, Jia Li, An Li, et al. Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method. Journal of Alloys and Compounds, 697, 174-181(2017).

[16] Xiaoxin Liu, Xu Cheng, Huaming Wang, . Influence of processing conditions on formation of stray grains in DD5 single crystal superalloys by laser melting multi-traced deposition. Chinese Journal of Lasers, 44, 0602009(2017).

[17] Zhaoyang Liu, Huan Qi. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy. Acta Materialia, 87, 248-258(2015).

[18] Hongyou Bian, Quanxing Zhai, Shen Qu, . Experimental study on laser deposition repair GH738 alloy. Infrared and Laser Engineering, 47, 0706002(2018).

[19] Tao Wang, Yanyan Zhu, Shuquan Zhang, et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing. Journal of Alloys and Compounds, 632, 505-513(2015).

[20] Hongyou Bian, Xingyue Zhai, Shijie Wang, . Microstructure and properties of two-stage aging heat treated single multilayer DZ125 after laser deposition repair. Rare Metal Materials and Engineering, 49, 3122-3128(2020).

[21] Guowei Wang, Jingjing Liang, Yanhong Yang, et al. Effects of scanning speed on microstructure in laser surface-melted single crystal superalloy and theoretical analysis. Journal of Materials Science & Technology, 34, 1315-1324(2018).

[22] Shiwei Ci, Jingjing Liang, Jinguo Li, et al. Microstructure and stress-rupture property of DD32 nickel-based single crystal superalloy fabricated by additive manufacturing. Journal of Alloys and Compounds, 854, 157180(2020).

[23] Huan Yu, Lian Li, Zhenzhen Zhou, . Phase transformation and microstructure formation of K424 superalloy with different cooling rate. Journal of Aeronautical Materials, 34, 1-7(2014).

[24] Qiuge Li, Xin Lin, Xinghua Wang, . Microstructure of laser solid forming K465 superalloy. Rare Metal Materials and Engineering, 45, 1215-1219(2016).

[25] Pengyu Xing, Yiwen Zhang, Jian Jia. MC carbides in FGH4098 alloy with different Ta contents. Transactions of Materials and Heat Treatment, 39, 88-92(2018).

[26] X Cao, B Rivaux, M Jahazi, et al. Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd: YAG laser. Journal of Materials Science, 44, 4557-4571(2009).