[1] [1] Grand View Research 2022 3D printing market size, share & trends analysis report by component (hardware, software, services), by printer type, by technology, by software, by application, by vertical, by region, and segment forecasts 2024–2030 (available at: www.grandviewresearch.com/industry-analysis/3d-printing-industry-analysis)

[2] [2] Wang P P, Li G W, Li K, Liu X L, Wang J, Liu T Y and Wu W Z 2023 Enhanced multi-material 4D printing hybrid composites based on shape memory polymer/thermoplastic elastomer Smart Mater. Struct.32 055025

[3] [3] Lee H, Jang Y, Choe J K, Lee S, Song H, Lee J P, Lone N and Kim J 2020 3D-printed programmable tensegrity for soft robotics Sci. Robot.5 eaay9024

[4] [4] Georgopoulou A, Vanderborght B and Clemens F 2021 Fabrication of a soft robotic gripper with integrated strain sensing elements using multi-material additive manufacturing Front. Robot. AI8 615991

[5] [5] Ntagios M, Nassar H, Pullanchiyodan A, Navaraj W T and Dahiya R 2020 Robotic hands with intrinsic tactile sensing via 3D printed soft pressure sensors Adv. Intell. Syst.2 1900080

[6] [6] Keong B A W and Hua R Y C 2018 A novel fold-based design approach toward printable soft robotics using flexible 3D printing materials Adv. Mater. Technol.3 1700172

[7] [7] Wagner M A, Huang J L, Okle P, Paik J and Spolenak R 2020 Hinges for origami-inspired structures by multimaterial additive manufacturing Mater. Des.191 108643

[8] [8] Lahaie R G, Hansen C J and Kazmer D O 2024 Development of fused deposition modeling of multiple materials (FD3M) through dynamic coaxial extrusion 3D Print. Addit. Manuf.11 485–95

[9] [9] Weeks R D, Truby R L, Uzel S G M and Lewis J A 2023 Embedded 3D printing of multimaterial polymer lattices via graph-based print path planning Adv. Mater.35 2206958

[10] [10] Choi I, Jang S, Jung S, Woo S, Kim J, Bak C, Lee Y and Park S 2023 A dual stimuli-responsive smart soft carrier using multi-material 4D printing Mater. Horiz.10 3668–79

[11] [11] Boley J W, van Rees W M, Lissandrello C, Horenstein M N, Truby R L, Kotikian A, Lewis J A and Mahadevan L 2019 Shape-shifting structured lattices via multimaterial 4D printing Proc. Natl Acad. Sci. USA116 20856–62

[12] [12] Hardin J O, Ober T J, Valentine A D and Lewis J A 2015 Microfluidic printheads for multimaterial 3D printing of viscoelastic inks Adv. Mater.27 3279–84

[13] [13] Wang Z B, Wu Y G, Zhu B, Chen Q X, Wang L Y, Zhao Y, Sun D H, Zheng J Y and Wu D Z 2023 A magnetic soft robot with multimodal sensing capability by multimaterial direct ink writing Addit. Manuf.61 103320

[14] [14] Vinciguerra M R, Patel D K, Zu W Z, Tavakoli M, Majidi C and Yao L N 2023 Multimaterial printing of liquid crystal elastomers with integrated stretchable electronics ACS Appl. Mater. Interfaces15 24777–87

[15] [15] Hassan I and Selvaganapathy P R 2022 A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing Addit. Manuf.50 102559

[16] [16] Simi′nska-Stanny J, Nizio M, Szymczyk-Zikowska P, Bro˙zyna M, Junka A, Shavandi A and Podstawczyk D 2022 4D printing of patterned multimaterial magnetic hydrogel actuators Addit. Manuf.49 102506

[17] [17] Wan X, He Y, Liu Y J and Leng J S 2022 4D printing of multiple shape memory polymer and nanocomposites with biocompatible, programmable and selectively actuated properties Addit. Manuf.53 102689

[18] [18] Zhou L Y, Gao Q, Fu J Z, Chen Q Y, Zhu J P, Sun Y and He Y 2019 Multimaterial 3D printing of highly stretchable silicone elastomers ACS Appl. Mater. Interfaces11 23573–83

[19] [19] Beck D et al 2023 Additive manufacturing of multimaterial composites for radiation shielding and thermal management ACS Appl. Mater. Interfaces15 35400–10

[20] [20] Malas A, Saleh E, Del Carmen Gimnez-lpez M, Rance G A, Helps T, Taghavi M, Rossiter J M, Tuck C J, Ashcroft I A and Goodridge R D 2022 Reactive jetting of high viscosity nanocomposites for dielectric elastomer actuation Adv. Mater. Technol.7 2101111

[21] [21] Xie M Y, Zhu M Z, Yang Z S, Okada S and Kawamura S 2021 Flexible self-powered multifunctional sensor for stiffness-tunable soft robotic gripper by multimaterial 3D printing Nano Energy79 105438

[22] [22] Sheng X J, Xu H P, Zhang N B, Ding N Y, Zhu X Y and Gu G Y 2020 Multi-material 3D printing of caterpillar-inspired soft crawling robots with the pneumatically bellow-type body and anisotropic friction feet Sens. Actuators A 316 112398

[23] [23] Schlatter S, Grasso G, Rosset S and Shea H 2020 Inkjet printing of complex soft machines with densely integrated electrostatic actuators Adv. Intell. Syst.2 2000136

[24] [24] Zhu M Z, Xie M Y, Lu X M, Okada S and Kawamura S 2020 A soft robotic finger with self-powered triboelectric curvature sensor based on multi-material 3D printing Nano Energy73 104772

[25] [25] Bartlett N W, Tolley M T, Overvelde J T B, Weaver J C, Mosadegh B, Bertoldi K, Whitesides G M and Wood R J 2015 A 3D-printed, functionally graded soft robot powered by combustion Science349 161–5

[26] [26] Wu L L, Li B and Zhou J 2016 Isotropic negative thermal expansion metamaterials ACS Appl. Mater. Interfaces8 17721–7

[27] [27] Zhao Z A, Yuan C, Lei M, Yang L, Zhang Q, Chen H S, Qi H J and Fang D N 2019 Three-dimensionally printed mechanical metamaterials with thermally tunable auxetic behavior Phys. Rev. Appl.11 044074

[28] [28] Akbari S, Sakhaei A H, Kowsari K, Yang B, Serjouei A, Yuanfang Z and Ge Q 2018 Enhanced multimaterial 4D printing with active hinges Smart Mater. Struct.27 065027

[29] [29] Yuan C, Wang F F, Qi B Y, Ding Z, Rosen D W and Ge Q 2020 3D printing of multi-material composites with tunable shape memory behavior Mater. Des.193 108785

[30] [30] Deng X H, Zhang G Y, Yu Z W, Shao G B and Li L Q 2023 Manufacturing of mesoscale non-assembly mechanism with water-soluble support in projection stereolithography process J. Manuf. Process.85 658–65

[31] [31] Joralmon D, Alfarhan S, Kim S, Tang T T, Jin K L and Li X J 2022 Three-dimensional printing of liquid crystals with thermal sensing capability via multimaterial vat photopolymerization ACS Appl. Polym. Mater.4 2951–9

[32] [32] Han D, Wang Y P, Yang C and Lee H 2021 Multimaterial printing for cephalopod-inspired light-responsive artificial chromatophores ACS Appl. Mater. Interfaces13 12735–45

[33] [33] Matte C D, Pearson M, Trottier-Cournoyer F, Dafoe A and Kwok T H 2019 Automated storage and active cleaning for multi-material digital-light-processing printer Rapid Prototyp. J.25 864–74

[34] [34] Khatri B, Frey M, Raouf-Fahmy A, Scharla M V and Hanemann T 2020 Development of a multi-material stereolithography 3D printing device Micromachines11 532

[35] [35] Truby R L and Lewis J A 2016 Printing soft matter in three dimensions Nature540 371–8

[36] [36] Faber J A, Arrieta A F and Studart A R 2018 Bioinspired spring origami Science359 1386–91

[37] [37] Ye H T, Liu Q J, Cheng J X, Li H G, Jian B C, Wang R, Sun Z C, Lu Y and Ge Q 2023 Multimaterial 3D printed self-locking thick-panel origami metamaterials Nat. Commun.14 1607

[38] [38] Kolesky D B, Truby R L, Gladman A S, Busbee T A, Homan K A and Lewis J A 2014 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs Adv. Mater.26 3124–30

[39] [39] Liu W J et al 2017 Rapid continuous multimaterial extrusion bioprinting Adv. Mater.29 1604630

[40] [40] Skylar-Scott M A, Mueller J, Visser C W and Lewis J A 2019 Voxelated soft matter via multimaterial multinozzle 3D printing Nature575 330–5

[41] [41] Bader C, Kolb D, Weaver J C, Sharma S, Hosny A, Costa J and Oxman N 2018 Making data matter: voxel printing for the digital fabrication of data across scales and domains Sci. Adv.4 eaas8652

[42] [42] Ding Z, Yuan C, Peng X R, Wang T H, Qi H J and Dunn M L 2017 Direct 4D printing via active composite materials Sci. Adv.3 e1602890

[43] [43] Sitthi-Amorn P, Ramos J E, Wangy Y, Kwan J, Lan J, Wang W and Matusik W 2015 MultiFab: a machine vision assisted platform for multi-material 3D printing ACM Trans. Graph.34 129

[44] [44] Wang Q M, Jackson J A, Ge Q, Hopkins J B, Spadaccini C M and Fang N X 2016 Lightweight mechanical metamaterials with tunable negative thermal expansion Phys. Rev. Lett.117 175901

[45] [45] Ge Q et al 2021 3D Printing of highly stretchable hydrogel with diverse UV curable polymers Sci. Adv.7 eaba4261

[46] [46] Cheng J X et al 2022 Centrifugal multimaterial 3D printing of multifunctional heterogeneous objects Nat. Commun.13 7931

[47] [47] Guy B J, Morris A and Mirjalili S A 2022 Toward emulating human movement: adopting a data-driven bitmap-based “voxel” multimaterial workflow to create a flexible 3D printed neonatal lower limb 3D Print. Addit. Manuf.9 349–64

[48] [48] Stratasys Inc 2023 Product catalog for PolyJet printers (available at: www.stratasys.com/en/3d-printers/printercatalog/polyjet/)

[49] [49] Ge Q, Qi H J and Dunn M L 2013 Active materials by four-dimension printing Appl. Phys. Lett.103 131901

[50] [50] Ge Q, Dunn C K, Qi H J and Dunn M L 2014 Active origami by 4D printing Smart Mater. Struct.23 094007

[51] [51] Ge Q, Sakhaei A H, Lee H, Dunn C K, Fang N X and Dunn M L 2016 Multimaterial 4D printing with tailorable shape memory polymers Sci. Rep.6 31110

[52] [52] Yuan C, Wang F F and Ge Q 2021 Multimaterial direct 4D printing of high stiffness structures with large bending curvature Extrem. Mech. Lett.42 101122

[53] [53] Zhang B et al 2021 Mechanically robust and UV-curable shape-memory polymers for digital light processing based 4D printing Adv. Mater.33 2101298

[54] [54] Eckel Z C, Zhou C Y, Martin J H, Jacobsen A J, Carter W B and Schaedler T A 2016 Additive manufacturing of polymer-derived ceramics Science351 58–62

[55] [55] Park S, Shou W, Makatura L, Matusik W and Fu K 2022 3D printing of polymer composites: materials, processes, and applications Matter5 43–76

[56] [56] Ge Q, Li Z Q, Wang Z L, Kowsari K, Zhang W, He X N, Zhou J L and Fang N X 2020 Projection micro stereolithography based 3D printing and its applications Int. J. Extrem. Manuf.2 022004

[57] [57] Kuang X, Wu J T, Chen K J, Zhao Z A, Ding Z, Hu F J Y, Fang D N and Qi H J 2019 Grayscale digital light processing 3D printing for highly functionally graded materials Sci. Adv.5 eaav5790

[58] [58] Moore D G, Barbera L, Masania K and Studart A R 2020 Three-dimensional printing of multicomponent glasses using phase-separating resins Nat. Mater.19 212–7

[59] [59] Caprioli M, Roppolo I, Chiappone A, Larush L, Pirri C F and Magdassi S 2021 3D-printed self-healing hydrogels via digital light processing Nat. Commun.12 2462

[60] [60] Yue L, Macrae Montgomery S, Sun X H, Yu L X, Song Y Y, Nomura T, Tanaka M and Qi HJ 2023 Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability Nat. Commun.14 1251

[61] [61] Li S, Bai H D, Liu Z, Zhang X Y, Huang C Q, Wiesner L W, Silberstein M and Shepherd R F 2021 Digital light processing of liquid crystal elastomers for self-sensing artificial muscles Sci. Adv.7 eabg3677

[62] [62] Bauer J, Crook C and Baldacchini T 2023 A sinterless, low-temperature route to 3D print nanoscale optical-grade glass Science380 960–6

[63] [63] Wen X W et al 2021 3D-printed silica with nanoscale resolution Nat. Mater.20 1506–11

[64] [64] Geng Q, Wang D E, Chen P F and Chen S C 2019 Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization Nat. Commun.10 2179

[65] [65] Saha S K, Wang D E, Nguyen V H, Chang Y N, Oakdale J S and Chen S C 2019 Scalable submicrometer additive manufacturing Science366 105–9

[66] [66] Zhang W et al 2021 Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers Nat. Commun.12 112

[67] [67] Huang T Y, Huang H W, Jin D D, Chen Q Y, Huang J Y, Zhang L and Duan H L 2020 Four-dimensional micro-building blocks Sci. Adv.6 eaav8219

[68] [68] Kelly B E, Bhattacharya I, Heidari H, Shusteff M, Spadaccini C M and Taylor H K 2019 Volumetric additive manufacturing via tomographic reconstruction Science363 1075–9

[69] [69] Toombs J T, Luitz M, Cook C C, Jenne S, Li C C, Rapp B E, Kotz-Helmer F and Taylor H K 2022 Volumetric additive manufacturing of silica glass with microscale computed axial lithography Science376 308–12

[70] [70] Thijssen Q, Quaak A, Toombs J, De Vlieghere E, Parmentier L, Taylor H and Van Vlierberghe S 2023 Volumetric printing of thiol-ene photo-cross-linkable poly(-caprolactone): a tunable material platform serving biomedical applications Adv. Mater.35 2210136

[71] [71] Cook C C et al 2020 Highly tunable thiol-ene photoresins for volumetric additive manufacturing Adv. Mater.32 2003376

[72] [72] Zhang Q, Kuang X, Weng S Y, Yue L, Roach D J, Fang D N and Qi H J 2021 Shape-memory balloon structures by pneumatic multi-material 4D printing Adv. Funct. Mater.31 2010872

[73] [73] Wang Y, Sachyani Keneth E, Kamyshny A, Scalet G, Auricchio F and Magdassi S 2022 4D multimaterial printing of programmable and selective light-activated shape-memory structures with embedded gold nanoparticles Adv. Mater. Technol.7 2101058

[74] [74] Mao H C, Jia W X, Leung Y S, Jin J and Chen Y 2021 Multi-material stereolithography using curing-on-demand printheads Rapid Prototyp. J.27 861–71

[75] [75] Chen D and Zheng X Y 2018 Multi-material additive manufacturing of metamaterials with giant, tailorable negative Poisson's ratios Sci. Rep.8 9139

[76] [76] Cui H C et al 2022 Design and printing of proprioceptive three-dimensional architected robotic metamaterials Science376 1287–93

[77] [77] Song Q C, Chen Y N, Hou P L, Zhu P, Helmer D, Kotz-Helmer F and Rapp B E 2023 Fabrication of multi-material pneumatic actuators and microactuators using stereolithography Micromachines14 244

[78] [78] Joyee E B, Szmelter A, Eddington D and Pan Y Y 2022 3D printed biomimetic soft robot with multimodal locomotion and multifunctionality Soft Robot.9 1–13

[79] [79] Mishra A K, Wallin T J, Pan W Y, Xu A, Wang K Y, Giannelis E P, Mazzolai B and Shepherd R F 2020 Autonomic perspiration in 3D-printed hydrogel actuators Sci. Robot.5 eaaz3918

[80] [80] Zhang Y F, Ng C J X, Chen Z, Zhang W, Panjwani S, Kowsari K, Yang H Y and Ge Q 2019 Miniature pneumatic actuators for soft robots by high-resolution multimaterial 3D printing Adv. Mater. Technol.4 1900427

[81] [81] He X N et al 2023 Multimaterial three-dimensional printing of ultraviolet-curable ionic conductive elastomers with diverse polymers for multifunctional flexible electronics ACS Appl. Mater. Interfaces15 3455–66

[82] [82] Zhang B et al 2018 Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing J. Mater. Chem. B 6 3246–53

[83] [83] Li Z Q, He X N, Cheng J X, Li H G, Zhang Y F, Shi X J, Yu K, Yang H Y and Ge Q 2021 Hydrogel-elastomer-based stretchable strain sensor fabricated by a simple projection lithography method Int. J. Smart Nano Mater.12 256–68

[84] [84] Ma X Y et al 2016 Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting Proc. Natl Acad. Sci. USA113 2206–11

[85] [85] Miri A K et al 2018 Microfluidics-enabled multimaterial maskless stereolithographic bioprinting Adv. Mater.30 1800242

[86] [86] Ma X Y, Yu C, Wang P R, Xu W Z, Wan X Y, Lai C S E, Liu J, Koroleva-Maharajh A and Chen S C 2018 Rapid 3D bioprinting of decellularized extracellular matrix with regionally varied mechanical properties and biomimetic microarchitecture Biomaterials185 310–21

[87] [87] Bhusal A, Dogan E, Nguyen H A, Labutina O, Nieto D, Khademhosseini A and Miri A K 2022 Multi-material digital light processing bioprinting of hydrogel-based microfluidic chips Biofabrication14 014103

[88] [88] Wu J T, Zhao Z A, Hamel C M, Mu X M, Kuang X, Guo Z Y and Qi H J 2018 Evolution of material properties during free radical photopolymerization J. Mech. Phys. Solids112 25–49

[89] [89] Montgomery S M, Hamel C M, Skovran J and Qi H J 2022 A reaction–diffusion model for grayscale digital light processing 3D printing Extrem. Mech. Lett.53 101714

[90] [90] Yuan C, Kowsari K, Panjwani S, Chen Z C, Wang D, Zhang B, Ng C J X, Alvarado P V Y and Ge Q 2019 Ultrafast three-dimensional printing of optically smooth microlens arrays by oscillation-assisted digital light processing ACS Appl. Mater. Interfaces11 40662–8

[91] [91] Han D, Yang C, Fang N X and Lee H 2019 Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control Addit. Manuf.27 606–15

[92] [92] Wang M, Li W L, Mille L S, Ching T, Luo Z Y, Tang G S, Garciamendez C E, Lesha A, Hashimoto M and Zhang Y S 2022 Digital light processing based bioprinting with composable gradients Adv. Mater.34 2107038

[93] [93] Zhou C, Chen Y, Yang Z G and Khoshnevis B 2013 Digital material fabrication using mask-image-projection-based stereolithography Rapid Prototyp. J.19 153–65

[94] [94] Maruyama T, Hirata H, Furukawa T and Maruo S 2020 Multi-material microstereolithography using a palette with multicolor photocurable resins Opt. Mater. Express10 2522–32

[95] [95] Kowsari K, Akbari S, Wang D, Fang N X and Ge Q 2018 High-efficiency high-resolution multimaterial fabrication for digital light processing-based three-dimensional printing 3D Print. Addit. Manuf.5 185–93

[96] [96] Inamdar A, Magana M, Medina F, Grajeda Y and Wicker R 2006 Development of an automated multiple material stereolithography machine Proc. 17th Annual Solid Freeform Fabrication Symp. (Austin, TX) pp 624–35

[97] [97] Kim H, Choi J W and Wicker R 2010 Scheduling and process planning for multiple material stereolithography Rapid Prototyp. J.16 232–40

[98] [98] Kim H C, Choi J W, MacDonald E and Wicker R 2010 Slice overlap-detection algorithm for process planning in multiple-material stereolithography Int. J. Adv. Manuf. Technol.46 1161–70

[99] [99] Choi J W, Kim H C and Wicker R 2011 Multi-material stereolithography J. Mater. Process. Technol.211 318–28

[100] [100] Wicker R B and MacDonald E W 2012 Multi-material, multi-technology stereolithography Virtual Phys. Prototyp.7 181–94

[101] [101] Wang R, Ye H T, Cheng J X, Li H G, Zhu P F, Li B, Fan R, Chen J Z, Lu Y and Ge Q 2023 Ultrastrong and damage-tolerant ceramic architectures via 3D printing Addit. Manuf.61 103361

[102] [102] Xu Z P, Ha C S, Kadam R, Lindahl J, Kim S, Wu H F, Kunc V and Zheng X Y 2020 Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices Addit. Manuf.32 101106

[103] [103] Hensleigh R, Cui H C, Xu Z P, Massman J, Yao D S, Berrigan J and Zheng X Y 2020 Charge-programmed three-dimensional printing for multi-material electronic devices Nat. Electron.3 216–24

[104] [104] Fang N, Lee H, Sun C and Zhang X 2005 Sub-diffraction-limited optical imaging with a silver superlens Science308 534–7

[105] [105] Zheng X Y et al 2016 Multiscale metallic metamaterials Nat. Mater.15 1100–6

[106] [106] Kim S, Handler J J, Cho Y T, Barbastathis G and Fang N X 2021 Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation Sci. Adv.7 eabh1200

[107] [107] Hegde M, Meenakshisundaram V, Chartrain N, Sekhar S, Tafti D, Williams C B and Long T E 2017 3D printing all-aromatic polyimides using mask-projection stereolithography: processing the nonprocessable Adv. Mater.29 1701240

[108] [108] Traugutt N A, Mistry D, Luo C Q, Yu K, Ge Q and Yakacki C M 2020 Liquid-crystal-elastomer-based dissipative structures by digital light processing 3D printing Adv. Mater.32 2000797

[109] [109] Ye X L, Wang C, Wang L, Lu B H, Gao F L and Shao D 2022 DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries Chem. Commun.58 7642–5

[110] [110] Lopez-Larrea N, Criado-Gonzalez M, Dominguez-Alfaro A, Alegret N, Del Agua I, Marchiori B and Mecerreyes D 2022 Digital light 3D printing of PEDOT-based photopolymerizable inks for biosensing ACS Appl. Polym. Mater.4 6749–59

[111] [111] Bi M H, Tran P, Xia L W, Ma G W and Xie Y M 2022 Topology optimization for 3D concrete printing with various manufacturing constraints Addit. Manuf.57 102982

[112] [112] Schwartz J J and Boydston A J 2019 Multimaterial actinic spatial control 3D and 4D printing Nat. Commun.10 791

[113] [113] Li C C, Cheng J X, He Y F, He X N, Xu Z Y, Ge Q and Yang C H 2023 Polyelectrolyte elastomer-based ionotronic sensors with multi-mode sensing capabilities via multi-material 3D printing Nat. Commun.14 4853

[114] [114] He X N, Cheng J X, Li Z Q, Ye H T, Sun Z C, Liu Q J, Li H G, Wang R and Ge Q 2023 Stretchable ultraviolet curable ionic conductive elastomers for digital light processing based 3D printing Adv. Mater. Technol.8 2202088

[115] [115] Wang D, Li L, Zhang B, Zhang Y F, Wu M S, Gu G Y and Ge Q 2020 Effect of temperature on the programmable helical deformation of a reconfigurable anisotropic soft actuator Int. J. Solids Struct.199 169–80

[116] [116] Wang D, Li L, Serjouei A, Dong L T, Weeger O, Gu G Y and Ge Q 2018 Controllable helical deformations on printed anisotropic composite soft actuators Appl. Phys. Lett.112 181905

[117] [117] Hamel C M, Roach D J, Long K N, Demoly F, Dunn M L and Qi H J 2019 Machine-learning based design of active composite structures for 4D printing Smart Mater. Struct.28 065005

[118] [118] Sun X H, Yue L, Yu L X, Shao H, Peng X R, Zhou K, Demoly F, Zhao R K and Qi H J 2022 Machine learning-evolutionary algorithm enabled design for 4D-printed active composite structures Adv. Funct. Mater.32 2109805