[1] [1] HOU X,HU Y H,GRINTHAL A,et al. Liquid-based gating mechanism with tunable multiphase selectivity and antifouling behaviour［J］. Nature,2015,519(7541): 70-73.

[2] [2] HULL C. Apparatus for production of three dimensional objects by stereolithography: US6027324［P］. 2000-02-22.

[3] [3] Canon Limited. Canon brought ceramic 3D printing service to China International Advanced Ceramics Exhibition［J］. Guangdong printing,2023(4): 76 (in Chinese).

[4] [4] YANG M M,LUO X D,XIE Z P. Review of 3D printing technology of ceramic［J］. Journal of Synthetic Crystals,2017,46(1): 183-186+191 (in Chinese).

[5] [5] SHI Z,LIU W Y,ZHAI D,et al. Akermanite scaffolds for bone tissue engineering: 3D printing using polymer precursor and scaffold properties［J］. Journal of Inorganic Materials,2023,38(7): 763-770 (in Chinese).

[6] [6] SHI Y L,WANG W Q. 3D inkjet printing of the zirconia ceramic implanted teeth［J］. Materials Letters,2020,261: 127131.

[7] [7] YU Y,ZOU B,WANG X F,et al. Rheological behavior and curing deformation of paste containing 85wt% Al2O3 ceramic during SLA-3D printing［J］. Ceramics International,2022,48(17): 24560-24570.

[8] [8] LI S,ZHANG Y B,ZHAO T,et al. Additive manufacturing of SiBCN/Si3N4w composites from preceramic polymers by digital light processing［J］. RSC Advances,2020,10(10): 5681-5689.

[9] [9] Analysis on the process and characteristics of ink-jet printing and traditional screen printing technology［J］. Screen Printing Industry,2021(7): 30-32 (in Chinese).

[10] [10] LIU K Q,FANG K J,CHEN W C,et al. Hydroxyethyl methyl cellulose controls the diffusion behavior of pico-liter scale ink droplets on silk to improve inkjet printing performance［J］. International Journal of Biological Macromolecules,2023,224: 1252-1265.

[11] [11] ZHANG K,FANG K J,SUN F Y,et al. The hydrophobicity and swelling of methyl cellulose coating synergistically enhancing the inkjet printing qualities of cotton fabric［J］. Progress in Organic Coatings,2022,173: 107187.

[12] [12] LIU Q. Analysis of inkjet printing technology［J］. Guangdong Printing,2021(2): 29-31 (in Chinese).

[13] [13] HE J Y,LI L H. Progress and trends of ink-jet printing technology［J］. China Printing and Packaging Study,2009,1(6): 1-9 (in Chinese).

[14] [14] CESARANO J,SEGALMAN R,CALVERT P. Robocasting provides moldless fabrication from slurry deposition［J］. Ceramic Industry,1998.

[15] [15] LI X M,YANG T,PENG B Y,et al. Preparation of titanium dioxide ceramic slurry and its 3D printing for direct-ink-writing［J］. Acta Materiae Compositae Sinica,2022,39(7): 3510-3517 (in Chinese).

[16] [16] LI Y H. Study on direct writing molding of alumina ceramic slurry and its performance analysis［D］. Yancheng: Yancheng Institute of Technology,2023 (in Chinese).

[17] [17] ZHOU Z H,JIANG Y G,FENG J Z,et al. Direct ink writing of porous ceramics: a review［J］. Materials Reports,2023,37(4): 77-83 (in Chinese).

[18] [18] TAN S,BIN MOHD SHAFARI M I S,CHAN C K,et al. An approach to 3D print liquid ceramic slurries［J］. Materials Today: Proceedings,2022,70: 487-491.

[19] [19] ZHOU J,FAN Y G,LU L,et al. Preparation and properties of zirconia bioceramics by direct ink writing［J］. Materials Reports,2023,37(17): 48-53 (in Chinese).

[20] [20] YE Z Y,CHU C Y,ZHANG D W,et al. Study on 3D-direct ink writing based on adding silica submicron-particles to improve the rheological properties of alumina ceramic ink［J］. Materials Today Communications,2021,28: 102534.

[21] [21] SOLA A,TRINCHI A. Fused deposition modeling of composite materials at a glance-supplementary tables［M］//Fused Deposition Modeling of Composite Materials. Amsterdam: Elsevier,2023: 329-445.

[22] [22] NIU F R,YANG X L,LI Y B,et al. Fused deposition modeling of Si3N4 ceramics: a cost-effective 3D-printing route for dense and high performance non-oxide ceramic materials［J］. Journal of the European Ceramic Society,2022,42(15): 7369-7376.

[23] [23] GUAN Z H,YANG X L,LIU P,et al. Additive manufacturing of zirconia ceramic by fused filament fabrication［J］. Ceramics International,2023,49(17): 27742-27749.

[24] [24] ZHANG L,YANG X F,XU X W,et al. 3D printed zirconia ceramics via fused deposit modeling and its mechanical properties［J］. Journal of Inorganic Materials,2021,36(4): 436-442 (in Chinese).

[25] [25] ABDUL I M,KUMAR S K,JANI S P,et al. Mechanical properties of carbon particle mixed polylactic acid via fused deposition modeling［J］. Materials Today: Proceedings,2021,46: 8590-8593.

[26] [26] YANG Q J,LI J W,LI M,et al. Research progress in fused deposition modeling 3D printing equipment［J］. China Plastics,2022,36(2): 157-171 (in Chinese).

[27] [27] DI H X,ZHANG Q Q,AN X G,et al. Research progress of 3D printing ceramics［J］. Shandong Ceramics,2018,41(3): 18-24 (in Chinese).

[28] [28] LIANG D,HE R J,FANG D N. Development of additive manufacturing of ceramics［J］. Advanced Ceramics,2017,38(4): 231-247 (in Chinese).

[29] [29] ZHENG W,WU J M,CHEN S,et al. Preparation of high-performance silica-based ceramic cores with B4C addition using selective laser sintering and SiO2-Al2O3 sol infiltration［J］. Ceramics International,2023,49(4): 6620-6629.

[30] [30] ZHAO T Y,WU W,HU H B,et al. The piperazine pyrophosphate intumescent flame retardant of polypropylene composites prepared by selective laser sintering［J］. Polymer Composites,2023,44(1): 305-317.

[31] [31] FU M H. Research of silicon carbide components via selective laser sintering combined with reaction sintering［D］.Wuhan: Huazhong University of Science and Technology,2017 (in Chinese).

[32] [32] ZHENG W,WU J M,CHEN S,et al. Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration［J］. Additive Manufacturing,2021,48: 102396.

[33] [33] YAN Y N,JING H,ZHANG D J,et al. Laser three-dimensional additive forming manufacturing platform by computer integrating for LCD-SLM-SLS［J］. Electromachining & Mould,2014(3): 1-7 (in Chinese).

[34] [34] KONG X Z. Research on SLA photocuring 3D printing forming technology［J］. China Plant Engineering,2021(11): 207-208 (in Chinese).

[35] [35] JIN Y F,DING Y C， WEN J H. Application status and prospect of stereo lithography appearance additive manufacture technology［J］. MW Metal Forming,2023(3): 18-23 (in Chinese).

[36] [36] LEWIS J A. Direct-write assembly of ceramics from colloidal inks［J］. Current Opinion in Solid State and Materials Science,2002,6(3): 245-250.

[37] [37] SANTOLIQUIDO O,COLOMBO P,ORTONA A. Additive manufacturing of ceramic components by digital light processing: a comparison between the “bottom-up” and the “top-down” approaches［J］. Journal of the European Ceramic Society,2019,39(6): 2140-2148.

[38] [38] FANG H B,CHEN J M. 3D printing based on digital light processing technology［J］. Journal of Beijing University of Technology,2015,41(12): 1775-1782 (in Chinese).

[39] [39] JANG K J,KANG J H,FISHER J G,et al. Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing［J］. Dental Materials,2019,35(5): e97-e106.

[40] [40] CHEN L,WANG Z S,CUI X D. 3D printing of shape-controllable alumina ceramics by using optimized slurry and sintering process［J］. Journal of Sichuan University (Natural Science Edition),2022,59(4): 145-152 (in Chinese).

[41] [41] ZHENG J T,LU J,WANG S J,et al. Design and physicochemical properties of UV curable ZTA ceramic paste［J］. Journal of Ceramics,2022,43(2): 227-235 (in Chinese).

[42] [42] CHEN Z W,LI J J,LIU C B,et al. Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing［J］. Ceramics International,2019,45(9): 11549-11557.

[43] [43] GU K J. Research on zirconia slurry preparation and process of zirconia ceramics fabricated via DLP additive manufacturing［D］.Nanjing: Nanjing University of Aeronautics and Astronautics,2019 (in Chinese).

[44] [44] LIU S Y,CHEN Y J,LU P,et al. Si3N4 slurry with high solid phase,low viscosity prepared via surface-oxidation and silane coupling agent modification hybrid method［J］. Journal of the European Ceramic Society,2024,44(1): 161-172.

[45] [45] LIU D D,LI F,ZHANG X M,et al. Research progress in the ceramic production by stereolithography 3D printing［J］. Journal of Hangzhou Normal University (Natural Science Edition),2019,18(6): 576-580 (in Chinese).

[46] [46] QIU Y N,HU K H,LYU Z G. Ceramic forming method based on sterolighography additive manufacturing［J］. Journal of Netshape Forming Engineering,2020,12(5): 117-121 (in Chinese).

[47] [47] MU Y H,CHEN J W,AN X L,et al. Effect of synergism of solid loading and sintering temperature on microstructural evolution and mechanical properties of 60 vol% high solid loading ceramic core obtained through stereolithography 3D printing［J］. Journal of the European Ceramic Society,2023,43(2): 661-675.

[48] [48] WANG Q,BAO C G,LI S J,et al. Fabrication of diatomite slurries and diatomite porous ceramics based on stereo lithography apparatus［J］. Bulletin of the Chinese Ceramic Society,2022,41(4): 1416-1422 (in Chinese).

[49] [49] RAO W D,LIU Y,CHENG L J,et al. Densification mechanism of stereolithographical dense Si3N4 ceramics with CeO2 as sintering additive by field assisted sintering［J］. Journal of Central South University,2021,28(4): 1233-1243.

[50] [50] CHEN F,WU Y R,ZHU H,et al. Mechanical and biological properties of ZrO2 bioceramics by stereolithography technique［J］. Journal of the Chinese Ceramic Society,2021,49(9): 1837-1845 (in Chinese).

[51] [51] LIANG J W,LIU W,YANG G,et al. Rapid preparation of hierarchically porous ceramic microspheres based on UV-curing-assisted molding［J］. Journal of the European Ceramic Society,2021,41(16): 232-238.

[52] [52] LI Q L,QIU Y X,HOU W Q,et al. Slurry flow characteristics control of 3D printed ceramic core layered structure: experiment and simulation［J］. Journal of Materials Science & Technology,2023,164: 215-228.

[53] [53] HUANG T C,GU H,ZHANG J,et al. Research on flow analysis of extruding process in direct ink writing ceramics 3D printing［J］. Machinery Design & Manufacture,2021(10): 138-140+144 (in Chinese).

[54] [54] LIU J. Study on forming process of porous ceramics based on 3D printing mould combined with gelcasting［D］.Wuxi: Jiangnan University,2021 (in Chinese).

[55] [55] ZHANG G X,ZOU B,WANG X F,et al. Design,manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology［J］. Ceramics International,2023,49(1): 1009-1019.

[56] [56] XIA X. Introduction to 3D printing ceramic materials and industrialiazation develpoment in China［J］. Ceramics,2017(5): 9-12 (in Chinese).

[57] [57] CHEN X. Research on nano-modification of light-cured 3D printing silicon oxide-based ceramic core［D］. Xi’an: Changan University,2021 (in Chinese).

[58] [58] XU X Q,NIU S X,WANG X G,et al. Fabrication and casting simulation of composite ceramic cores with silica nanopowders［J］. Ceramics International,2019,45(15): 19283-19288.

[59] [59] WANG S X,LI L,BI L N,et al. Rapid preparation of thick-walled 3D printing silica ceramics［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1943-1949 (in Chinese).

[60] [60] DONG X J,WU J Q,ZHOU Q,et al. Mechanical and dielectric properties of Si3N4-SiO2 ceramics prepared by digital light processing based 3D printing and oxidation sintering［J］. Ceramics International,2023,49(18): 29699-29708.

[61] [61] CHEN D D,BAO M D,LI X,et al. Research on anisotropy of 3D printed silicon oxide-based ceramic cores［J］. China Ceramics,2020,56(5): 33-39 (in Chinese).

[62] [62] LOPEZ-ALVAREZ M,SERRA J,DE A,et al. Marine-based carbon and silicon carbide scaffolds with patterned surface for tissue engineering applications［M］//SIKALIDIS C,ed. Advances in Ceramics-Electric and Magnetic Ceramics,Bioceramics,Ceramics and Environment. InTech,2011.

[63] [63] DING G J,HE R J,ZHANG K Q,et al. Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror［J］. Ceramics International,2020,46(11): 18785-18790.

[64] [64] CAO J W,MIAO K,XIONG S F,et al. 3D printing and in situ transformation of SiCnw/SiC structures［J］. Additive Manufacturing,2022,58: 103053.

[65] [65] LI F F,ZHU M,CHEN J,et al. High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing［J］. Journal of the European Ceramic Society,2024,44(2): 617-625.

[66] [66] XU H C. Research on key technologies of 3D printing of SiC ceramic matrix composites ［D］. Jinan: Shandong University,2022 (in Chinese).

[67] [67] GONZLEZ P,BORRAJO J P,SERRA J,et al. Extensive studies on biomorphic SiC ceramics properties for medical applications［J］. Key Engineering Materials,2003,254/255/256: 1029-1032.

[68] [68] XU M,GIRISH Y R,RAKESH K P,et al. Recent advances and challenges in silicon carbide (SiC) ceramic nanoarchitectures and their applications［J］. Materials Today Communications,2021,28: 102533.

[69] [69] ZHANG X F,YU G Q,JIANG L W. Application of alumina ceramic［J］. Foshan Ceramics,2010,20(2): 38-43 (in Chinese).

[70] [70] FAN J. Study on printing Al2O3 composites based on shear thinning DIW 3D and its properties［D］. Taiyuan: North University of China,2023 (in Chinese).

[71] [71] WU H D,LIU W,LIN L F,et al. Realization of complex-shaped and high-performance alumina ceramic cutting tools via vat photopolymerization based 3D printing: a novel surface modification strategy through coupling agents aluminic acid ester and silane coupling agent［J］. Journal of the European Ceramic Society,2023,43(3): 1051-1063.

[72] [72] LI H,LIU Y S,LIU Y S,et al. Silica strengthened alumina ceramic cores prepared by 3D printing［J］. Journal of the European Ceramic Society,2021,41(4): 2938-2947.

[73] [73] GUO J Y,XIE H H,YANG X L,et al. Preparation of fine-grained alumina ceramics by gel 3D printing［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1927-1936 (in Chinese).

[74] [74] LEE G,CARRILLO M,MCKITTRICK J,et al. Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: towards load-bearing applications［J］. Additive Manufacturing,2020,33: 101107.

[75] [75] CHEN X J,LI Y M,ZHAO G R. Preparation and characterization of 3D printed ZrO2 ceramic parts fabricated by powder extrusion printing［J］. Ceramics International,2023,49(2): 2721-2729.

[76] [76] GUO L,JIN E L,SU J M,et al. Light curing 3D printing technology of zirconia ceramic［J］. Applied Laser,2020,40(6): 1040-1044 (in Chinese).

[77] [77] WANG H,SHEN F,LI Z,et al. Preparation of high-performance ZrO2 bio-ceramics by stereolithography for dental restorations［J］. Ceramics International,2023,49(17): 28048-28061.

[78] [78] HE R X,LIU W,WU Z W,et al. Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method［J］. Ceramics International,2018,44(3): 3412-3416.

[79] [79] YAJIMA S,HAYASHI J,OMORI M,et al. Development of a silicon carbide fibre with high tensile strength［J］. Nature,1976,261: 683-685.

[80] [80] LI S,DUAN W Y,ZHAO T,et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology［J］. Journal of the European Ceramic Society,2018,38(14): 4597-4603.

[81] [81] WANG X Y. Study on 3D printing SiC ceramics based on organic precursors［D］. Shenyang: Liaoning University,2023 (in Chinese).

[82] [82] XING R Z,XU G X,QU N,et al. 3D printing of liquid-metal-in-ceramic metamaterials for high-efficient microwave absorption［J］. Advanced Functional Materials,2023: 2307499.

[83] [83] SHAO H F,HE Y,FU J Z,et al. 3D printing magnesium-doped wollastonite/β-TCP bioceramics scaffolds with high strength and adjustable degradation［J］. Journal of the European Ceramic Society,2016,36(6): 1495-1503.

[84] [84] BIN S S,KEONG T K,CHENG C H,et al. Tricalcium phosphate/hydroxyapatite (TCP-HA) bone scaffold as potential candidate for the formation of tissue engineered bone［J］. The Indian Journal of Medical Research,2013,137(6): 1093-1101.

[85] [85] JARAMILLO N,MORENO A,OSPINA V,et al. Effect of synthesis on the antimicrobial response of β-TCP/Mg with potential applications in the regeneration of dental tissue: 3D printing of ceramic paste in a β-TCP/Mg/bioglass system［J］. Materials Letters,2023,350: 134907.

[86] [86] LIU S,MO L N,BI G Y,et al. DLP 3D printing porous β-tricalcium phosphate scaffold by the use of acrylate/ceramic composite slurry［J］. Ceramics International,2021,47(15): 21108-21116.

[87] [87] ZHANG Y H,ZHANG Q,HE F P,et al. Fabrication of cancellous-bone-mimicking β-tricalcium phosphate bioceramic scaffolds with tunable architecture and mechanical strength by stereolithography 3D printing［J］. Journal of the European Ceramic Society,2022,42(14): 6713-6720.

[88] [88] WANG Y,YUAN X Y,YE J D,et al. Effects of zinc/gallium dual doping on the physicochemical properties and cell response of 3D printed β-tricalcium phosphate ceramic scaffolds［J］. Ceramics International,2022,48(19): 28557-28564.

[89] [89] LI X,ZHANG H,SHEN Y F,et al. Fabrication of porous β-TCP/58S bioglass scaffolds via top-down DLP printing with high solid loading ceramic-resin slurry［J］. Materials Chemistry and Physics,2021,267: 124587.

[90] [90] LI H. Preparation and properties of 3D printed biological β-TCP/TiO2 ceramic scaffold［D］. Chengdu: Chengdu University,2022 (in Chinese).

[91] [91] CHEN X F,CAO Q R,CHEN T,et al. 3D printing for precision construction of ceramic membranes: current status,challenges,and prospects［J］. Advanced Membranes,2023,3: 100068.

[92] [92] JI H C,ZHANG X J,PEI W C,et al. Research progress in ceramic 3D printing technology and material development［J］. Journal of Materials Engineering,2018,46(7): 19-28 (in Chinese).

[93] [93] YANG J,DUANMU C X,ZHOU Z Y. Current advances in 3D printing ceramic materials［J］. Mechanical Research & Application,2023,36(4): 182-186 (in Chinese).

[94] [94] CHEN Z W,LI Z Y,LI J J,et al. 3D printing of ceramics: a review［J］. Journal of the European Ceramic Society,2019,39(4): 661-687.