Journal of the Chinese Ceramic Society, Volume. 50, Issue 3, 691(2022)
Effects of Sintering Temperature on Properties of Porous PZT Ceramics
[1] [1] TANG H S, JIANG X L, LI L, et al. Electromechanical properties of ultra-low porous auxetic piezocomposite: from the perspective of Poisson's ratio[J]. J Am Ceram Soc, 2021, 104(6): 2628-2645.
[2] [2] CURECHERIU L, LUKACS V A, PADURARIU L, et al. Effect of porosity on functional properties of Lead-free piezoelectric BaZr0.15Ti0.85O3 porous ceramics[J]. Materials, 2020, 13(15): 3324.
[3] [3] ZHANG Y, TOPOLOV V Y, ISAEVA A N, et al. Piezoelectric performance of PZT-based materials with aligned porosity: experiment and modeling[J]. Smart Mater Struct, 2019, 28(12): 125021.
[4] [4] LIU W, XU J, WANG Y Z, et al. Processing and properties of porous PZT ceramics from particle-stabilized foams via gel casting[J]. J Am Ceram Soc, 2013, 96(6):1827-1831.
[6] [6] YANG A K, WANG C A, GUO R, et al. Porous PZT ceramics with high hydrostatic figure of merit and low acoustic impedance by TBA-based gel-casting[J]. J Am Ceram Soc, 2010, 93(5): 1427-1431.
[8] [8] LIU W, CAO Y, WANG J H, et al. Piezoelectric properties of 3-1 type porous PMN-PZT ceramics doped with strodium[J]. Mater Sci Eng B-Adv, 2021, 263: 114847.
[9] [9] TOPOLOV V Y, ISAEVA A N, et al. Comparison of effective parameters of lead-free 1-3 type composites based on ferroelectric single crystals[J]. Ferroelectrics, 2020, 567(1): 182-192.
[10] [10] WANG S H, MA W B, WU J Q, et al. Preparation technology of 3-3 composite piezoelectric material and its influence on performance[J]. J Alloys Compd, 2021, 864: 148137.
[11] [11] SKINNER D P, NEWNHAM R E, CROSS L E. Flexible composite transducers[J]. Mater Res Bull, 1978, 13(6): 599-607.
[12] [12] KARA H, RAMESH R, STEVENS R, et al. Porous PZT ceramics for receiving transducers[J]. IEEE T Ultrason Ferr, 2003, 50(3): 289-296.
[13] [13] HU X P, LI X S, YAN K, et al. Fabrication of porous PZT ceramics using micro-stereolithography technology[J]. Ceram Int, 2021, 47(22): 32376-32381.
[14] [14] ABHINAY S, DIXIT P, MAZUMDER R. Effect of pore former sucrose on microstructure and electrical properties of porous BZT-0.5BCT ceramics[J]. Ferroelectrics, 2020, 557(S1): 18-27.
[15] [15] PIAZZA D, GALASSI C, BARZEGAR A, et al. Dielectric and piezoelectric properties of PZT ceramics with anisotropic porosity[J]. J Electroceram, 2010, 24(3): 170-176.
[16] [16] ZENG T, DONG X L, MAO C, et al. Effects of pore shape and porosity on the properties of porous PZT 95/5 ceramics[J]. J Eur Ceram Soc, 2007, 27(4): 2025-2029.
[17] [17] LIU W, DU L J, WANG Y Z, et al. Effects of foam composition on the microstructure and piezoelectric properties of macroporous PZT ceramics from ultrastable particle-stabilized foams[J]. Ceram Int, 2013, 39(8): 8781-8787.
[18] [18] ZHANG M Y, SUN H J, LIU X F, et al. Structural design of PZT porous ceramics obtained via free-casting by ice-templating and performance exploration[J]. Mater Res Bull, 2020, 127: 110862.
[19] [19] GUO R, WANG C A, YANG A K, et al. Enhanced piezoelectric property of porous lead zirconate titanate ceramics with one dimensional ordered pore structure[J]. J Appl Phys, 2010, 108: 124112.
[20] [20] LIU W, LI N, WANG Y Z, et al. Preparation and properties of 3-1 type PZT ceramics by a self-organization method[J]. J Eur Ceram Soc, 2015, 35(13): 3467-3474.
[21] [21] LIU W, XU J, LV R F, et al. Effects of sintering behavior on piezoelectric properties of porous PZT ceramics[J]. Ceram Int, 2014, 40(1): 2005-2010.
[22] [22] LIU W, LV L, WANG Y Z, et al. Structural phase transition and electrical properties of Sr2+ substituted porous PMN-PZT ceramics[J]. J Am Ceram Soc, 2018, 101(6): 2197-2201.
[23] [23] LIU W, LIU W T, WANG Y Z, et al. Piezoelectric and mechanical properties of CaO reinforced porous PZT ceramics with one-dimensional pore channels[J]. Ceram Int, 2017, 43(2): 2063-2068.
[24] [24] ZENG T, DONG X L, CHEN S T, et al. Processing and piezoelectric properties of porous PZT ceramics[J]. Ceram Int, 2007, 33(3): 395-399.
[25] [25] ZHANG H L, LI J F, ZHANG B P. Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents[J]. Acta Mater, 2007, 55(1): 171-181.
[26] [26] WAKINO K, OKADA T, YOSHIDA N, et al. A New equation for predicting the dielectric constant of a mixture[J]. J Am Ceram Soc, 1993, 76(10): 2588-2594.
[27] [27] BOWEN C R, TOPOLOV V Y. Piezoelectric sensitivity of PbTiO3-based ceramic/polymer composites with 0-3 and 3-3 connectivity[J]. Acta Mater, 2003, 51(17): 4965-4976.
[28] [28] XU T T, WANG C A. Control of pore size and wall thickness of 3-1 type porous PZT ceramics during freeze-casting process[J]. J Am Ceram Soc, 2016, 94(6): 1794-1799.
[29] [29] ZHOU C M, ZHANG J L, SU W B, et al. Large thickness-mode electromechanical coupling and good temperature stability of 1-3 PZT/epoxy composites[J]. J Mater Sci-Mater Electron, 2021, 32: 4705-5712.
[30] [30] PROMSAWAT M, WATCHARAPASORN A, SREESATTABUD T, et al. Effect of ZnO nano-particulates on structure and properties of PZT/ZnO ceramics[J]. Ferroelectrics, 2009, 382: 166-172.
[31] [31] JIANSIRISOMBOON S, PROMSAWAT M, NAMSAR O, et al. Fabrication-structure-properties relations of nano-sized NiO incorporated PZT ceramics[J]. Mater Chem Phys, 2009, 117(1): 80-85
Get Citation
Copy Citation Text
LIU Wei, SUN Haoxin, WANG Jianhong, DONG Yingge, BAI Peikang, XI Xiaoqin, YANG Jinlong. Effects of Sintering Temperature on Properties of Porous PZT Ceramics[J]. Journal of the Chinese Ceramic Society, 2022, 50(3): 691
Category:
Received: Oct. 15, 2021
Accepted: --
Published Online: Nov. 11, 2022
The Author Email: