Optics and Precision Engineering, Volume. 19, Issue 5, 1022(2011)

Supporting structure of 620 mm thin primary mirror and its active surface correction

CHEN Fu-lin1...2,*, ZHANG Jing-xu1, WU Xiao-xia1, and FAN Lei12 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    References(14)

    [1] [1] RAY F B. Active optics technology—an overview [J]. Analysis of Optical Structures. SPIE, 1991,1532:188-206.

    [2] [2] YU Y, CAO G R. A study on the corrective capability and optimization of active mirrors[J]. Transact ions of Beijing Institute of Technology,2003,23(2)229-233. (in Chinese)

    [4] [4] LI H Z, LIN X D, LIU X Y, et al.. Experiment system of 400mm thin mirror active optics [J]. Opts. Precision Eng., 2009,17(9):2077-2083.(in Chinese)

    [5] [5] WANG F G, YANG H B, LI H Z, et al.. Application and algorithm research of active optics in thin mirrors [J].Infrared Technology 2007,29(12):704-707.(in Chinese)

    [6] [6] SU D Q, CUI X Q. Active Optics — Key technology of the New Generation Telescope [J]. Progress in Astronomy 1999,17(1):1-14.(in Chinese)

    [9] [9] CUI X Q. Support System of Large Aperture Thin primary Mirror with Active Optics [D]. dissertation of doctoral degree, Nanjing observatory, Chinese Academy of Sciences, Sept 1995. (in Chinese)

    [10] [10] NEOTHE L. Use of minimum-energy modes for modal-active optics corrections of thin meniscus mirrors [J]. Journal of Modern Optics 1991, 38(6):1043-1066.

    [11] [11] SCHIPANI P, PEROTT F, AEROTTA L M. Active optics correction force for the VST 2.6m primary mirror [J]. SPIE, 2006 6273:62733A-1-12.

    [12] [12] XAVIER B, JEAN L C, RENAUD M Y, et al.. Optimization methods aimed at designing a force control active mirror II : actuator pattern optimization [J]. SPIE, 1997,3126:366-377.

    [13] [13] DOUGLAS R N, VICTOR K, JOHN A, et al.. Active tangent link system for transverse support of large thin meniscus mirrors[J]. SPIE 2007,6665 66650F-1-12.

    [14] [14] MYUNG K C, RONALD S P, II K. Optimization of the ATST primary mirror support system[J]. SPIE, 2006,6273:62731E-1-12.

    CLP Journals

    [1] CAO Yu-yan, WANG Zhi-chen, ZHOU Chao, FAN Lei, HAN Xi-da, ZHANG Yao-zu. General modeling and optimal design of flexure supporting structure for optical components[J]. Optics and Precision Engineering, 2016, 24(11): 2792

    [2] Wu Zhihui, Wang Dongping, Hua Yangyang, Ni Mingyang, Dong Lijian. Influence of Adjustable Supporting Force on Surface Shape of Optical Element[J]. Laser & Optoelectronics Progress, 2015, 52(12): 122201

    [3] WU Xiao-xia, LI Jian-feng, SONG Shu-mei, SHAO Liang, MING Ming. Active support system for 4 m SiC lightweight primary mirror[J]. Optics and Precision Engineering, 2014, 22(9): 2451

    [4] XUE Jian-xing, WANG Qi-ming, GU Xue-dong, ZHAO Qing, GAN Heng-qian. Estimation and improvement for fitting accuracy of instantaneous parabolic reflector in FAST[J]. Optics and Precision Engineering, 2015, 23(7): 2051

    [5] Zhao Lei, Gong Yan. Design and Analysis for the High-Precision Lens Support Structure of Objective Lens for Lithography[J]. Acta Optica Sinica, 2012, 32(9): 922001

    [6] Liu Yongming, Xie Jun, Li Xiangqin, Liu Zhenyu. Optimization and Figure Analysis of Elastic Thin-Film Liquid Lens[J]. Chinese Journal of Lasers, 2013, 40(12): 1216001

    [7] HAN Guang-yu, CAO Li-hua, GAO Yun-guo, QIAO Jian, XUE Xiang-yao. Supporting and assembling for primary mirrors of 1 m aperture telescopes[J]. Optics and Precision Engineering, 2012, 20(9): 1922

    [8] ZHU Yi, CHEN Tao, WANG Jian-li, LI Hong-zhuang, WU Xiao-xia. Active correction of 1.23 m SiC mirror using bending mode[J]. Optics and Precision Engineering, 2017, 25(10): 2551

    [9] Hu Haifei, Luo Xiao, Xin Hongwei, Qi Erhui, Zheng Ligong, Zhang Xuejun. Layout Optimization of Equal-Force Supports for Ultra-Large Optical Fabrication[J]. Acta Optica Sinica, 2014, 34(4): 422003

    Tools

    Get Citation

    Copy Citation Text

    CHEN Fu-lin, ZHANG Jing-xu, WU Xiao-xia, FAN Lei. Supporting structure of 620 mm thin primary mirror and its active surface correction[J]. Optics and Precision Engineering, 2011, 19(5): 1022

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Oct. 8, 2010

    Accepted: --

    Published Online: Jun. 15, 2011

    The Author Email: Fu-lin CHEN (ocean_fulin@hotmail.com)

    DOI:10.3788/ope.20111905.1022

    Topics