[2] [2] KOGIAS G, ZASPALIS V T. Temperature stable MnZn ferrites for applications in the frequency region of 500 kHz［J］. Ceram Intern, 2016: S0272884216002224.

[4] [4] ANDALIB P, HARRIS V. Grain boundary engineering of power inductor cores for MHz applications［J］. J Alloys Compd, 2019, 832: 153131.

[5] [5] SILVEYRA J M, FERRARA E, et al. Soft magnetic materials for a sustainable and electrified world［J］. Science, 2018, 362(6413): eaao0195.

[6] [6] LIU D, CHEN X, YING Y, et al. MnZn power ferrite with high Bs and low core loss［J］. Ceram Int, 2016, 42(7): 9152-9156.

[10] [10] WU G H, YU Z, TANG Z, et al. Effect of CaCO3 and V2O5 on the microstructure and magnetic property of MnZn ferrites［C］// 2018 IEEE Intern Magn Conf (INTERMAG). IEEE, 2018.

[11] [11] SUN K, LAN Z W, YU Z, et al. Analysis of losses in NiO doped MnZn ferrites［J］. J Alloys Compd, 2009, 468(1/2): 315-320.

[12] [12] GILES A D, WESTENDORP F F, The effect of cobalt substitutions on some properties of manganese Zinc ferrites［J］, J Phys D: Appl Phys,1976,9(14): 2117-2122.

[13] [13] TOKATLIDIS S, KOGIAS G, ZASPALIS V T. Low loss MnZn ferrites for applications in the frequency region of 1-3 MHz［J］. J Magn Magn Mater, 2018: S0304885317331062.

[14] [14] WANG N C, YING Y, et al. Development of Mn-Zn power ferrite with low losses over a broad temperature range for applications in the high frequency region of 0.5-3.0 MHz - Science Direct［J］. Ceram Int, 2021, (15): 47.

[17] [17] SHOKROLLAHI H, JANGHORBAN K. Influence of additives on the magnetic properties, microstructure and densification of Mn-Zn soft ferrites-science direct［J］. Mater Sci Eng: B, 2007, 141(3): 91-107.

[18] [18] SUN K, WANG J, YANG Y, et al. Influence of Ta2O5-Co2O3 co-doping on the magnetic property of NiMgCuZn ferrites［J］. Phys: B Condens Matter, 2015(476): 122-128.

[19] [19] WU G H, YU Z, TANG Z, et al. Effect of CaCO3 and V2O5 composite additives on the microstructure and magnetic property of MnZn ferrites［J］. IEEE Trans on Magn, 2018, 54(11): 1-7.

[20] [20] YAN M, YI S B, FAN X, et al. High-frequency MnZn soft magnetic ferrite by engineering grain boundaries with multiple-ion doping［J］. J Mater Sci Technol, 2021, 79: 165-170.

[21] [21] WU G H, YU Z, SUN K, et al. Effect of CaCu3Ti4O12 dopant on the magnetic and dielectric properties of high-frequency MnZn power ferrites［J］. J Magn Magn Mater, 2020, 513(11): 167095.

[22] [22] GUO R D, YU Z, et al. Effects of Bi2O3 on FMR linewidth and microwave dielectric properties of LiZnMn ferrite［J］. J Alloys Compd, 2014, 589(3): 1-4.

[23] [23] TEO M, KONG L B, LI Z W, et al. Development of magneto-dielectric materials based on Li-ferrite ceramics. II. DC resistivity and complex relative permittivity［J］. J Alloys Compd, 2008, 459(1/2): 567-575.

[24] [24] WU G H, YU Z, SUN K, et al. Ultra-low core losses at high frequencies and temperatures in MnZn ferrites with nano-BaTiO3 additives-science direct［J］. J Alloys Compd, 2020, 821: 153573.

[25] [25] YING Y, HU X, LI Z C, et al. Low power loss manganese ferrites with the addition of Ta2O5 for MHz applications［J］. J Magn Magn Mater, 2022, 561: 169699.

[26] [26] SUN B, CHEN F, XIE D, et al. A large domain wall pinning effect on the magnetic properties of ZrO2 added Mn-Zn ferrites［J］. Ceram Int, 2014, 40(4):6351-6354.

[27] [27] LEE J, KIM D, FLEIG J, et al. Geometry and electrical properties of grain boundaries in manganese zinc ferrite ceramics［J］. J Am Ceram Soc, 2004, 87(10): 1895-1902.

[28] [28] ZNIDARSIC A, DROFENIK M. High-resistivity grain boundaries in CaO-doped MnZn ferrites for high-frequency power application［J］. J Am Ceram Soc, 1999, 82(2): 359-365.

[29] [29] JOHNSON MT, VISSER EG. A coherent model for the complex permeability in polycrystalline ferrites［J］. IEEE Trans on Magn, 1990, 26(5): 1987-1989.

[30] [30] ZASPALIS V T, TSAKALOUDI V, KOLENBRANDER M. The effect of dopants on the incremental permeability of MnZn-ferrites［J］. J Magn Magn Mater, 2007, 313(1): 29-36.

[31] [31] HSIANG H, HSI C, LIN R L, et al. Addition of a minor amount of Co2Y effects on the microstructure, magnetic properties and DC-bias superposition characteristics of low-fire NiCuZn ferrites［J］. Mater Chem Phys, 2015, 151(151): 295-300.

[32] [32] ANDALIB P, HARRIS V G. Grain boundary engineering of power inductor cores for MHz applications［J］. J Alloys Compd, 2019, 832(8): 153131.

[33] [33] ANDALIB P, CHEN Y, HARRIS V G. Concurrent core loss suppression and high permeability by introduction of highly insulating intergranular magnetic inclusions to MnZn ferrite［J］. IEEE Magn Lett, 2018, 9(11): 1-5.

[34] [34] YING Y, FENG J W, et al. Effect of a YIG nanoparticle additive on the magnetic properties of MnZn ferrites for MHz frequency applications［J］. J Am Ceram Soc,2023, 106(1): 251-258

[35] [35] PANKERT J. Influence of grain boundaries on complex permeability in MnZn ferrites［J］. J Magn Magn Mater, 1994, 138(1/2): 45-51.

[36] [36] ZAAG P. New views on the dissipation in soft magnetic ferrites［J］. J Magn Magn Mater, 1999, 196-197(1-3): 315-319.

[37] [37] MIYOSHI Y, OKAMOTO N, KAGEYAMA K. Preparation of Mn-Zn Ferrites Having Fine Grain Size［J］. J Jpn Soc Powder Powder Metall, 2009, 39(11): 1011-1014.

[38] [38] PAPAZOGLOU P, ELEFTHERIOU E, ZASPALIS V T. Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz［J］. J Magn Magn Mater, 2006, 296(1): 25-31.

[39] [39] HANDA S, OHSHIMA Y, NAKASATO Y. Magnetic properties and magnetization process of low temperature sintering MnZn ferrites［J］. J Jpn Soc Powder Powder Metall, 2006, 53(3): 231-236.

[40] [40] HIROTA K, AOYAMA T, ENOMOTO S, et al. Microstructures and magnetic and electric properties of low-temperature sintering Mn-Zn ferrites without and with addition of lithium borosilicate glass［J］. J Magn Magn Mater,1999, 205(2): 283-289.

[41] [41] YING Y, XIONG X B, et al. Low temperature sintered MnZn ferrites for power applications at the frequency of 1 MHz［J］. J Eur Ceram Soc, 2021, 41(12): 5924-5930.

[43] [43] LI Z C, YING Y, et al. Effect of compressive stress on power loss of Mn-Zn ferrite for high-frequency applications［J］. Ceram Int, 2022, 48(12): 17723-17728.

[44] [44] LE F, et al. Effect of pressure on soft magnetic materials［J］. IEEE Trans Magn, 1981, 17(6): 3129-3134.

[45] [45] VARASTEGANI N, YOURDKHANI A, EBRAHIMI S, et al. Varistor and electrical properties of MgO. (Fe2O3)1-x (Bi2O3) x ceramics［J］, J Eur Ceram Soc, 2020, 40(4): 1325-1329

[46] [46] LUO G, HONG Y, ZHOU W, et al. Effect of chromium substitution on structural, electrical and magnetic properties of NiZn ferrites［J］. Trans Nonferrous Met Soc China, 2020, 30(7): 1895-1903

[47] [47] LORD H, PARKER R, Electrical resistivity of nickel ferrite［J］. Nature,1960, 188(4754): 929-930

[48] [48] AHMED M, ATEIA M, SALAH L, et al. Structural and electrical studies on La3+ substituted Ni-Zn ferrites［J］. Mater Chem Phys, 2005, 92(2/3): 310-321

[49] [49] HUSSAIN A. BAI G Bai, et al. Co2O3 and SnO2 doped MnZn ferrites for applications at 3-5 MHz frequencies［J］. Ceram Int, 2019, 45(9): 12544-12549.

[50] [50] WANG X, YI S, et al. Correlating the microstructure and magnetic properties of MnZn power ferrites via Co2O3 and MoO3 co-doping for MHz applications［J］. J Magn Magn Mater, 2021, 538(11): 168324