Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 5, 1588(2024)

Research Progress of Stereolithography 3D Printing of Silicon Nitride Ceramics

ZHOU Qingxuan1... WANG Yang1, HAN Zhuoqun1, ZHAO Zhicheng1, CHU Wei2, ZHAO Jie2, LIU Jia2, WANG Yingying2, CHENG Zhiqiang2, LI Ling2 and LIU Futian1,* |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    References(55)

    [1] [1] TYUGANOVA M A,ZUBKOVA N S,BUTYLKINA N G. Polymeric fibre materials with low combustibility: a review[J]. Fibre Chemistry,1994,26(5): 294-305.

    [2] [2] XUE W J,YI J,XIE Z P,et al. Enhanced fracture toughness of silicon nitride ceramics at cryogenic temperatures[J]. Scripta Materialia,2012,66(11): 891-894.

    [3] [3] KRSTIC Z,KRSTIC V D. Silicon nitride: the engineering material of the future[J]. Journal of Materials Science,2012,47(2): 535-552.

    [4] [4] ZHOU Y,HYUGA H,KUSANO D,et al. Development of high-thermal-conductivity silicon nitride ceramics[J]. Journal of Asian Ceramic Societies,2015,3(3): 221-229.

    [5] [5] BOCANEGRA-BERNAL M H,MATOVIC B. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures[J]. Materials Science and Engineering: A,2010,527(6): 1314-1338.

    [6] [6] YANG Y,SONG X,LI X J,et al. Recent progress in biomimetic additive manufacturing technology: from materials to functional structures[J]. Advanced Materials,2018,30(36): 1706539.

    [7] [7] CHEN Z W,LI Z Y,LI J J,et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society,2019,39(4): 661-687.

    [8] [8] ABOULIATIM Y,CHARTIER T,ABELARD P,et al. Optical characterization of stereolithography alumina suspensions using the Kubelka-Munk model[J]. Journal of the European Ceramic Society,2009,29(5): 919-924.

    [9] [9] ZOCCA A,COLOMBO P,GOMES C M,et al. Additive manufacturing of ceramics: issues,potentialities,and opportunities[J]. Journal of the American Ceramic Society,2015,98(7): 1983-2001.

    [10] [10] WANG F,LI L,SONG T,et al. Study on preparation and sintering of porous silicon nitride ceramics based on fused deposition technology[J]. Advanced Ceramics,2023,44(supplement 1): 461-472 (in Chinese).

    [11] [11] DONG X J,WU J Q,YU H L,et al. Additive manufacturing of silicon nitride ceramics: a review of advances and perspectives[J]. International Journal of Applied Ceramic Technology,2022,19(6): 2929-2949.

    [12] [12] ZANCHETTA E,CATTALDO M,FRANCHIN G,et al. Stereolithography of SiOC ceramic microcomponents[J]. Advanced Materials,2016,28(2): 370-376.

    [13] [13] ZHANG K Q,HE R J,XIE C,et al. Photosensitive ZrO2 suspensions for stereolithography[J]. Ceramics International,2019,45(9): 12189-12195.

    [14] [14] SUN J X,BINNER J,BAI J M. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography[J]. Journal of the European Ceramic Society,2019,39(4): 1660-1667.

    [15] [15] SUN J X,BINNER J,BAI J M. 3D printing of zirconia via digital light processing: optimization of slurry and debinding process[J]. Journal of the European Ceramic Society,2020,40(15): 5837-5844.

    [16] [16] ZHANG K Q,MENG Q Y,ZHANG X Q,et al. Roles of solid loading in stereolithography additive manufacturing of ZrO2 ceramic[J]. International Journal of Refractory Metals and Hard Materials,2021,99: 105604.

    [17] [17] HAN Z Q,LIU S H,QIU K,et al. The enhanced ZrO2 produced by DLP via a reliable plasticizer and its dental application[J]. Journal of the Mechanical Behavior of Biomedical Materials,2023,141: 105751.

    [18] [18] WANG Y,ZHOU Q X,HAN Z Q,et al. Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography[J]. Ceramics International,2024,50(1): 2467-2478.

    [19] [19] XING H Y,ZOU B,LAI Q G,et al. Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent[J]. Powder Technology,2018,338: 153-161.

    [20] [20] ZHANG S,SHA N,ZHAO Z. Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions[J]. Journal of the European Ceramic Society,2017,37(4): 1607-1616.

    [21] [21] GU Y,DUAN W Y,WANG T C,et al. Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry[J]. Ceramics International,2023,49(15): 25216-25224.

    [22] [22] GU Q C,SUN L,JI X Y,et al. High-performance and high-precision Al2O3 architectures enabled by high-solid-loading,graphene-containing slurries for top-down DLP 3D printing[J]. Journal of the European Ceramic Society,2023,43(1): 130-142.

    [23] [23] XU X H,ZHOU S X,WU J F,et al. Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology,solid loading,and self-leveling behavior[J]. Journal of the European Ceramic Society,2021,41(4): 2763-2774.

    [24] [24] WANG Y Y,WANG Z Y,LIU S H,et al. Additive manufacturing of silica ceramics from aqueous acrylamide based suspension[J]. Ceramics International,2019,45(17): 21328-21332.

    [25] [25] KCS L,TEGZE B,ALBERT E,et al. Ammonia-vapour-induced two-layer transformation of mesoporous silica coatings on various substrates[J]. Vacuum,2021,192: 110415.

    [26] [26] BAE C J,KIM D,HALLORAN J W. Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing[J]. Journal of the European Ceramic Society,2019,39(2/3): 618-623.

    [27] [27] LIU Y,CHEN Z W. Research progress in photopolymerization-based 3D printing technology of ceramics[J]. Journal of Materials Engineering,2020,48(9): 1-12 (in Chinese).

    [28] [28] HINCZEWSKI C,CORBEL S,CHARTIER T. Ceramic suspensions suitable for stereolithography[J]. Journal of the European Ceramic Society,1998,18(6): 583-590.

    [29] [29] GU Y,WANG G,DUAN W Y,et al. Application and prospect of photopolymerization technologies for ceramics[J]. Journal of the Chinese Ceramic Society,2021,49(5): 867-877 (in Chinese).

    [30] [30] ZAKERI S,VIPPOLA M,LEVNEN E. A comprehensive review of the photopolymerization of ceramic resins used in stereolithography[J]. Additive Manufacturing,2020,35: 101177.

    [31] [31] YANG Y,GUO X T,TANG J,et al. Research progress and prospects of non-oxide ceramic in stereolithography additive manufacturing[J]. Journal of Inorganic Materials,2022,37(3): 267-277 (in Chinese).

    [32] [32] HAN Z Q,LI L,LIU S H,et al. Research on rheological properties of stereolithography ZrO2 ceramic slurry[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1965-1971 (in Chinese).

    [33] [33] SUBBANNA M,KAPUR P C,PRADIP. Role of powder size,packing,solid loading and dispersion in colloidal processing of ceramics[J]. Ceramics International,2002,28(4): 401-405.

    [34] [34] GRIFFITH M L,HALLORAN J W. Freeform fabrication of ceramics via stereolithography[J]. Journal of the American Ceramic Society,1996,79(10): 2601-2608.

    [35] [35] LIU S,MO L N,BI G Y,et al. DLP 3D printing porous β-tricalcium phosphate scaffold by the use of acrylate/ceramic composite slurry[J]. Ceramics International,2021,47(15): 21108-21116.

    [36] [36] LIN L F,WU H D,XU Y R,et al. Fabrication of dense aluminum nitride ceramics via digital light processing-based stereolithography[J]. Materials Chemistry and Physics,2020,249: 122969.

    [37] [37] LIU Y,ZHAN L N,HE Y,et al. Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering[J]. Ceramics International,2020,46(2): 2063-2071.

    [38] [38] HALLORAN J W. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization[J]. Annual Review of Materials Research,2016,46: 19-40.

    [39] [39] MU Y H,CHEN J W,AN X L,et al. Effect of synergism of solid loading and sintering temperature on microstructural evolution and mechanical properties of 60vol% high solid loading ceramic core obtained through stereolithography 3D printing[J]. Journal of the European Ceramic Society,2023,43(2): 661-675.

    [40] [40] GRIFFITH M L,HALLORAN J W. Scattering of ultraviolet radiation in turbid suspensions[J]. Journal of Applied Physics,1997,81(6): 2538-2546.

    [41] [41] LI X B,ZHANG J X,DUAN Y S,et al. Rheology and curability characterization of photosensitive slurries for 3D printing of Si3N4 ceramics[J]. Applied Sciences,2020,10(18): 6438.

    [42] [42] HUANG R J,JIANG Q G,WU H D,et al. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method[J]. Ceramics International,2019,45(4): 5158-5162.

    [43] [43] LI Y H,HUANG S W,WANG S L,et al. Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP)[J]. Ceramics International,2022,48(3): 3652-3658.

    [44] [44] LIU Y,CHENG L J,LI H,et al. Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant[J]. Ceramics International,2020,46(10): 14583-14590.

    [45] [45] LI M,HUANG H L,WU J M,et al. Preparation and properties of Si3N4 ceramics via digital light processing using Si3N4 powder coated with Al2O3-Y2O3 sintering additives[J]. Additive Manufacturing,2022,53: 102713.

    [46] [46] LIU Y,ZHAN L N,WEN L,et al. Effects of particle size and color on photocuring performance of Si3N4 ceramic slurry by stereolithography[J]. Journal of the European Ceramic Society,2021,41(4): 2386-2394.

    [47] [47] HUANG S W,LI Y H,YANG P,et al. Cure behaviour and mechanical properties of Si3N4 ceramics with bimodal particle size distribution prepared using digital light processing[J]. Ceramics International,2023,49(8): 12166-12172.

    [48] [48] LIN L F,WU H D,HUANG Z Q,et al. Effect of monomers with different functionalities on stability,rheology,and curing behavior of ceramic suspensions[J]. Materials Chemistry and Physics,2022,275: 125243.

    [49] [49] ZOU W J,YANG P,LIN L F,et al. Improving cure performance of Si3N4 suspension with a high refractive index resin for stereolithography-based additive manufacturing[J]. Ceramics International,2022,48(9): 12569-12577.

    [50] [50] CAO C R,WANG C,ZHAO Z. Optimization of curing behavior of Si3N4 UV resin for photopolymerization 3D printing[J]. IOP Conference Series: Materials Science and Engineering,2019,678(1): 012013.

    [51] [51] SHEN M H,FU R L,LIU H B,et al. Photosensitive Si3N4 slurry with combined benefits of low viscosity and large cured depth for digital light processing 3D printing[J]. Journal of the European Ceramic Society,2023,43(3): 881-888.

    [52] [52] CHEN R F,DUAN W Y,WANG G,et al. Preparation of broadband transparent Si3N4-SiO2 ceramics by digital light processing (DLP) 3D printing technology[J]. Journal of the European Ceramic Society,2021,41(11): 5495-5504.

    [53] [53] TIAN C,WU J M,WU Y R,et al. Effect of polystyrene addition on properties of porous Si3N4 ceramics fabricated by digital light processing[J]. Ceramics International,2023,49(16): 27040-27049.

    [54] [54] WU Y R,TIAN C,WU J M,et al. Influence of the content of polymethyl methacrylate on the properties of porous Si3N4 ceramics fabricated by digital light processing[J]. Ceramics International,2023,49(19): 31228-31235.

    [55] [55] WU Y R,TIAN C,WU J M,et al. Influence of the ratio of sintering aids on the properties of porous Si3N4 ceramics fabricated by digital light processing[J]. Ceramics International,2023,49(20): 33004-33010.

    Tools

    Get Citation

    Copy Citation Text

    ZHOU Qingxuan, WANG Yang, HAN Zhuoqun, ZHAO Zhicheng, CHU Wei, ZHAO Jie, LIU Jia, WANG Yingying, CHENG Zhiqiang, LI Ling, LIU Futian. Research Progress of Stereolithography 3D Printing of Silicon Nitride Ceramics[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(5): 1588

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Special Issue:

    Received: Jan. 17, 2024

    Accepted: --

    Published Online: Aug. 15, 2024

    The Author Email: Futian LIU (mse_liuft@ujn.edu.cn)

    DOI:

    CSTR:32186.14.

    Topics