[1] [1] CAI J M, MI G B, GAO F, et al.. Research and development of some advanced high temperature titanium alloys for aero-engine ［J］. Journal of Materials Engineering, 2016, 44(8): 1-10.(in Chinese)

[2] [2] SINGH P, PUNGOTRA H, KALSI N S. On the characteristics of titanium alloys for the aircraft applications ［J］. Materials Today: Proceedings, 2017, 4(8): 8971-8982.

[3] [3] DAI J J, ZHU J Y, CHEN C Z, et al.. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review ［J］. Journal of Alloys and Compounds, 2016, 685(11): 784-798.

[4] [4] LIANG S X, YIN L X, LIU L X, et al.. Kinetics of thermodiffusion of TZ20 titanium alloy gas-nitride within temperature of 500 ℃—650 ℃ ［J］. Journal of Alloys and Compounds, 2018, 734(2): 172-178.

[5] [5] SITEK R, BOLEK T, MIZERA J. Microstructure and properties of Ti-Al intermetallic/Al2O3 layers produced on Ti6Al2Mo2Cr titanium alloy by PACVD method ［J］. Applied Surface Science, 2018, 437(4): 19-27.

[6] [6] KOSEKI S, INOUE K, SEKIYA K, et al.. Wear mechanisms of PVD-coated cutting tools during continuous turning of Ti6Al4V alloy ［J］. Precision Engineering, 2017, 47(1): 434-444.

[7] [7] FOMIN A, FOMINA M, KOSHURO V, et al.. Structure and mechanical properties of hydroxyapatite coatings produced on titanium using plasma spraying with induction preheating ［J］. Ceramics International, 2017, 43(14): 11189-11196.

[8] [8] GAO C, DAI L, MENG W, et al.. Electrochemically promoted electroless nickel-phosphorous plating on titanium substrate ［J］. Applied Surface Science, 2017, 392(1): 912-919.

[9] [9] LIU H X, LI ZH X, ZHANG X W, et al.. Microstructure characteristics of laser in situ synthesis high niobium Ti-Al intermetallic compound coating under heat treatment ［J］. Opt. Precision Eng., 2017, 25(6): 1477-1485.(in Chinese)

[10] [10] YANG C Y, CHENG X, TANG H B, et al.. Influence of microstructures and wear behaviors of microalloyed coatings on TC11 alloy surface using laser cladding technique ［J］. Surface & Coatings Technology, 2018, 337(3): 97-103.

[11] [11] SADEQ F O, SHARIFITABAR M, AFARANI M S. Synthesis of Ti-Si-Al coatings on the surface of Ti6Al4V alloy via hot dip siliconizing route ［J］. Surface & Coatings Technology, 2018, 337(3): 349-356.

[12] [12] SHAHZAD A, ZADORAZHNYY V Y, PAVLOV M D, et al.. Deposition of the Ti-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment ［J］. Journal of Alloys and Compounds, 2018, 731(1): 295-1302.

[13] [13] VALKOV S, PETROV P, LAZAROVA R, et al. Formation and characterization of Al-Ti-Nb alloys by electron-beam surface alloying ［J］. Applied Surface Science, 2016, 389(12): 768-774.

[14] [14] DAI J J, ZHANG F Y, WANG A M, et al.. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti6Al4V fabricated by laser surface alloying ［J］. Surface & Coatings Technology, 2017, 309(1): 805-813.

[15] [15] CANDEL J J, JIMEMEZ J A, FRANCONETTI P. Effect of laser irradiation on failure mechanism of Ti-Al composite coating produced by laser cladding ［J］. Journal of Materials Processing Technology, 2014, 214(11): 2325-2332.

[16] [16] LIU H X, ZHANG X W, JIANG Y H, et al.. Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process ［J］. Journal of Alloys and Compounds, 2016, 670(6): 268-274.

[17] [17] MALIUTINA I N, MOHAND H S, SLJOBERT J, et al.. Structure and oxidation behavior of γ-TiAl coating produced by laser cladding on titanium alloy ［J］. Surface & Coatings Technology, 2017, 319(6): 136-144.

[18] [18] GUO CH, ZHOU J S, CHEN J M. Microstructure and tribological properties of Ti5Si3 coating in-situ synthesized on titanium substrate by laser cladding ［J］. Journal of Inorganic Materials, 2012, 27(9): 970-976.(in Chinese)

[19] [19] BROVA M J, ALAT E, PAULEY M A, et al.. Undoped and ytterbium doped titanium aluminum nitride coatings for improved oxidation behavior of nuclear fuel cladding ［J］. Surface & Coatings Technology, 2017, 331(12): 163-171.

[20] [20] ZHAO Y G, ZHOU W, PENG X, et al.. Low oxygen pressure self-fused Al-Cr coatings formed on surface of titanium alloy and their oxidation resistance ［J］. Journal of Jinlin Univsrsity (Engineering and Technology Edition), 2004, 34(4): 521-526.(in Chinese)

[21] [21] ZHANG H X. Investigation on Microstructures and Wear Resistance of Ceramics and Ti-Al-Si Composite Coating ［D］. Jinan: Shandong University, 2016.(in Chinese)

[22] [22] SHAN X H, WANG C SH, YU Q. Microstructure and property of Nb-Al-Ti high temperature alloy coating by laser cladding on Ti alloy surfaces ［J］. Chinese Journal of Lasers, 2016, 45(8): 184-191.(in Chinese)

[23] [23] TAO J. Preliminary Study on Preparation, Microstructure and Properties of New Types of Wear Resistance Coating on Titanium Alloy Substrate by Laser ［D］. Zhenjiang: Jiangsu University, 2014. (in Chinese)

[24] [24] ZHANG X W, LIU H X, JIANG Y H, et al.. Microstructure of Al2O3/Ti-Al composite coatings prepared by laser aluminum thermal reduction processing ［J］. Journal of Inorganic Materials, 2013, 28(9): 1033-1039.(in Chinese)

[25] [25] LIU H X, LI ZH X, ZHANG X W, et al.. Effect of heat treatment on high-temperature oxidation resistance of high niobium Ti-Al intermetallic coating fabricated by laser in situ synthesis on titanium alloy ［J］. Acta Metallurgica Sinica, 2017, 53(2): 201-210.(in Chinese)

[26] [26] BRAUN R, FROHLICH M, BRAUE W, et al.. Oxidation behavior of gamma titanium aluminides with EB-PVD thermal barrier coatings exposed to air at 900 ℃ ［J］. Surface & Coating Technology, 2007, 202(3): 676-680.