[1] Ye Y X, Jia Z Y, Fu H et al. Study on evalution law of manufacturing micro-convex points on 45# steel surface by pulse-width laser[J]. Laser & Optoelectronics Progress, 53, 031408(2016).

[2] Zhou J, Shen H, Pan Y Q et al. Experimental study on laser microstructures using long pulse[J]. Optics and Lasers in Engineering, 78, 113-120(2016).

[3] Hu M N, Ge L C, Zhang J P et al. Hole-drilling with high depth-diameter ratio using multi-pulse femtosecond laser[J]. Chinese Journal of Lasers, 43, 0403006(2016).

[4] Lü J F, Han X G, He D et al. Effect of typical laser parameters on micro-dimple geometry of high-silicon aluminum alloy cylinder liner surface[J]. Laser & Optoelectronics Progress, 57, 131402(2020).

[5] Tan X H, Shan J G, Tang L et al. Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint[J]. Chinese Journal of Lasers, 42, 0303002(2015).

[6] Chen X, Wang F, Wu Q et al. Pit morphology evolution law of 3A21 aluminum alloy surface in laser texturing[J]. Laser & Optoelectronics Progress, 56, 241404(2019).

[7] Zhang Y M, Shen Z H, Ni X W et al. Modeling and simulation on long pulse laser drilling processing[J]. International Journal of Heat and Mass Transfer, 73, 429-437(2014).

[8] Shen H, Pan Y Q, Zhou J et al. Forming mechanism of bump shape in pulsed laser melting of stainless steel[J]. Journal of Heat Transfer, 139, 062301(2017).

[9] Povarnitsyn M E, Levashov P R. Simulation of multi-pulse laser ablation for laser-induced breakdown spectroscopy applications[J]. Applied Physics A, 125, 688(2019).

[10] Fu Y H, Huang T, Ye Y X et al. Influence of melt flow characteristics on textured bump forming[J]. Chinese Journal of Lasers, 46, 0702005(2019).

[11] Sharma S, Mandal V, Ramakrishna S A et al. Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications[J]. Journal of Manufacturing Processes, 39, 282-294(2019).

[12] Gao L Y, Zhou J Z, Sun Q et al. Numerical simulation and surface morphology of laser-cleaned aluminum alloy paint layer[J]. Chinese Journal of Lasers, 46, 0502002(2019).

[13] Courtois M, Carin M, Masson P L et al. A two-dimensional axially-symmetric model of keyhole and melt pool dynamics during spot laser welding[J]. Revue De Métallurgie, 110, 165-173(2013).

[14] Chen X F. Study on simulation of slender keyhole transient formation process during deep penetration laser welding of thick plate[D], 23-34(2014).

[15] Wan D P, Hu D J, Liu H B et al. Computational fluid dynamic numerical simulation for pulse laser texturing machining[J]. Chinese Journal of Lasers, 34, 070802(2007).

[16] Zhang C, Zhou J, Shen H et al. Role of capillary and thermocapillary forces in laser polishing of metals[J]. Journal of Manufacturing Science and Engineering, 139, 041019(2017).

[17] Sahoo P, Debroy T, McNallan M J. Surface tension of binary metal: surface active solute systems under conditions relevant to welding metallurgy[J]. Metallurgical Transactions B, 19, 483-491(1988).