[1] Geng Hai, Li Jing, Wu Chenchen. Development and application prospect of space electric propulsion technology[J]. Physics of Gases, 8, 1-16(2023).

[2] Zheng Maofan, Jiang Haocheng. C/C composite grid for ion thruster[J]. Spacecraft Environment Engineering, 27, 756-759(2010).

[3] Madeev S, Selivanov M, Shagayda A et al. Experimental study of ion optics with square apertures for high-power ion thrusters[J]. Review of Scientific Instruments, 90, 043302(2019).

[4] Jovel D R, Walker M L R, Herman D. Review of high-power electrostatic and electrothermal electric propulsion[J]. Journal of Propulsion and Power, 38, 1051-1081(2022).

[5] Zhang Tianping, Geng Hai, Zhang Xueer. Current Status and future development of ion electric propulsion[J]. Aerospace Shanghai, 36, 88-96(2019).

[6] Chen Juanjuan, Zhang Tianping, Jia Yanhui. Performance optimization of 20 cm xenon ion thruster discharge chamber[J]. High Power Laser and Particle Beams, 24, 2469-2473(2012).

[7] Jia Yanhui, Wang Cong, Li Juan. Parameter sensitivity analysis of electron backstreaming failure mode for 3-grid system ion thruster[J]. Journal of Propulsion Technology, 41, 140-148(2020).

[8] Sun Mingming, Geng Hai, Yang Juntai. Influence of ion beam perveance condition on grids erosion for ion thruster[J]. High Power Laser and Particle Beams, 33, 024005(2021).

[9] [9] Garner C E, Brophy J R. Fabrication testing of carboncarbon grids f ion optics[C]Proceedings of the 28th Joint Propulsion Conference Exhibit. 1992: 3149.

[10] [10] Meserole J S. Measurement of relative erosion rates of carboncarbon molybdenum optics[C]Proceedings of the 30th Joint Propulsion Conference Exhibit. 1994: 3119.

[11] [11] De Pano M K, Hart S L, Hanna A A, et al. Fabrication vibration results of 30cm pyrolytic graphite ion optics[C]Proceedings of the 40th AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2004: 3615.

[12] [12] Goebel D M, Katz I. Fundamentals of electric propulsion: ion Hall thrusters[M]. Hoboken: Wiley, 2008.

[13] [13] Mueller J, Brophy J R, Brown D K. Design, fabrication testing of 30cm dia. dished carboncarbon ion engine grids[C]Proceedings of the 32nd Joint Propulsion Conference Exhibit. 1996: 3204.

[14] [14] Rawal S P, Perry A R, Williams J D, et al. Perfmance evaluation of 8cm diameter ion optics assemblies fabricated from carboncarbon composites[C]Proceedings of the 40th AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2004: 3614.

[15] [15] Haag T, Soulas G C. Perfmance vibration of 30 cm pyrolytic ion thruster optics[C]Proceedings of the 39th AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2003: 3178.

[16] [16] Haag T, Patterson M, Rawlin V, et al. Carbonbased ion optics development at NASA GRC[C]Proceedings of the 27th International Electric Propulsion Conference. 2002: 1324.

[17] [17] Foster J E, Haag T, Kamhawi H, et al. The high power electric propulsion (HiPEP) ion thruster[C]Proceedings of the 40th AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2004: 3812.

[18] [18] Beatty J S, Snyder J S, Shih W. Manufacturing of 57cm carboncarbon composite ion optics f 20kWclass ion engine[C]Proceedings of the 41st AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2005: 4441.

[19] [19] Kitamura S, Miyazaki K, Hayakawa Y, et al. Fabrication testing of carboncarbon composite grids f a 14 cm ion thruster[J]. IEPC Paper, 1995: 9593.

[20] Shirakawa R, Yamashita Y, Koda D et al. Investigation and experimental simulation of performance deterioration of microwave discharge ion thruster μ10 during space operation[J]. Acta Astronautica, 174, 367-376(2020).

[21] Snyder J, Goebel D M, Hofer R R et al. Performance evaluation of the T6 ion engine[J]. Journal of Propulsion and Power, 28, 371-379(2012).

[22] [22] Chen Yue. Structural design mechanical analysis on CC grids f ion thruster[D]. Shanghai: Shanghai University, 2017

[23] Guo Dezhou, Gu Zuo, Zheng Maofan. The investigation of carbon-based material grid for ion thruster[J]. Vacuum & Cryogenics, 22, 125-131(2016).

[24] [24] Liu Haibo, Wang Jinyu, Han Lingsheng, et al. Experimental study on the cooling drilling of carbon liquid nitrogen in ion thruster[C]Conference Series on Electric Propulsion Technology. 2017: 4651

[25] Wei Heran, Luo Ruiqi, Zhang Chengshuang. Optimization of lamination angle based on carbon/carbon composite for grid[J]. Aerospace Manufacturing Technology, 32-38(2023).

[26] Funaki I, Kuninaka H, Toki K et al. Verification tests of carbon-carbon composite grids for microwave discharge ion thruster[J]. Journal of Propulsion and Power, 18, 169-175(2002).

[27] [27] Kitamura S, Hayakawa Y, Kasai Y, et al. Fabrication of carboncarbon composite ion thruster gridsimprovement of structural strength[J]. IEPC Paper, 1997: 9397.

[28] [28] Brophy J R, Marcucci M G, Ganapathi G B, et al. The ion propulsion system f Dawn[C]Proceedings of the 39th AIAAASMESAEASEE Joint Propulsion Conference Exhibit. 2003: 4542.

[29] [29] Mueller J, Brown D K, Garner C E, et al. Fabrication of CarbonCarbon grids f ion optics[C]International Electric Propulsion Conference. 1993: 93112.

[30] Hedges D E, Meserole J S. Demonstration and evaluation of carbon-carbon ion optics[J]. Journal of Propulsion and Power, 10, 255-261(1994).

[31] Zhang Tianping. New progress of electric propulsion technology in LIP[J]. Journal of Rocket Propulsion, 41, 7-12,32(2015).