[1] [1] Ren Z K, Guo X W, Fan W W, Wang T and Xiong X Y 2020 Research progress and prospects of precision ultra-thin strip rolling theory J. Mech. Eng.56 73–84

[2] [2] Liu X H, Zhao Q L and Yu Q B 2018 New discoveries in micro rolling of metal foils Steel Rolling35 1–5

[3] [3] Shit G, Mariappan K and Ningshen S 2023 Improvement of sensitization and intergranular corrosion of AISI type 304L stainless steel through thermo-mechanical treatment Corros. Sci.213 110975

[4] [4] Zhao M M, Wu H Y, Zhang B, Lu J N and Du L X 2023 Effect of Cr-rich carbide precipitates on austenite stability and consequent corrosion behavior of ultrafine-grained 304 stainless steel produced by cryogenic rolling and annealing treatment Mater. Charact.195 112553

[5] [5] Liu X H, Song M, Sun X K, Zhao Q L and Yu Q B 2017 Advances in research and application of foil rolling J. Mech. Eng.53 1–9

[6] [6] Qian W J 1986 30-High rolling mill for ultra-thin strip Iron Steel21 53–55

[7] [7] Xiao Y L 1993 Stainless steel foil production technology of nippon steel Spec. Steel14 28–29

[8] [8] Zhu Y Z, Zhang Y F, Wang S Z and Wang P 2014 Rolling of stainless steel foil Proc. 2014 National Steel deep Processing Seminar (The Chinese Society for Metals) pp 316–22

[9] [9] Salandro W A, Bunget C J and Mears L 2011 Several factors affecting the electroplastic effect during an electrically-assisted forming process J. Manuf. Sci. Eng.133 064503

[10] [10] Zhao Z Y, Wang G F, Hou H L, Zhang Y L and Wang Y Q 2018 The effect of pulsed current on the shear deformation behavior of Ti-6Al-4V alloy Sci. Rep.8 14748

[11] [11] Zimniak Z and Radkiewicz G 2008 The electroplastic effect in the cold-drawing of copper wires for the automotive industry Arch. Civ. Mech. Eng.8 173–9

[12] [12] Wang H B, Song G L and Tang G Y 2016 Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process Mater. Sci. Eng. A 662 456–67

[13] [13] Xie H Y, Dong X H, Ai Z Q, Wang Q, Peng F, Liu K, Chen F and Wang J F 2016 Experimental investigation on electrically assisted cylindrical deep drawing of AZ31B magnesium alloy sheet Int. J. Adv. Manuf. Technol.86 1063–9

[14] [14] Zhao G L, Zhao B, Ding W F, Xin L J, Nian Z W, Peng J H, He N and Xu J H 2024 Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community: a comparative analysis Int. J. Extrem Manuf.6 022007

[15] [15] Salandro W A, Joshua J J, Bunget C, Mears L and Roth J T 2015 Deformation of Metals Electrically Assisted Forming ed W A Salandro, J J Jones, C Bunget, L Mears and J T Roth (Springer) pp 1–21

[16] [16] Tang G Y, Zhang J, Zheng M X, Zhang J, Fang W and Li Q 2000 Experimental study of electroplastic effect on stainless steel wire 304L Mater. Sci. Eng. A 281 263–7

[17] [17] Fan W W, Ren Z K, Wei S F, Liu Q, Wang T and Wu G H 2024 Effect of high energy electric pulse on microstructure and mechanical properties of pre-deformed SUS 304 ultra-thin strip Mater. Sci. Eng. A 893 145364

[18] [18] Wang T, Wei X L, Zhang H R, Ren Z K, Gao B, Han J C and Bian L P 2022 Plastic deformation mechanism transition with solute segregation and precipitation of 304 stainless steel foil induced by pulse current Mater. Sci. Eng. A 840 142899

[19] [19] Fan W W, Liu Q, Liu W W, Wang T and Wang T X 2023 Research on pulse current-assisted tensile deformation of SUS304 ultra-thin strips China Mech. Eng.34 475–80,89

[20] [20] Zheng X P, Tang G Y, Song G L and Zheng Y S 2014 Electroplastic rolling of 304 stainless steel strip Iron Steel49 92–96

[21] [21] Ren Z K, Fan W W, Hou J and Wang T 2019 A numerical study of slip system evolution in ultra-thin stainless steel foil Materials12 1819

[22] [22] Ye K L, Luo H Y and Lv J L 2014 Producing nanostructured 304 stainless steel by rolling at cryogenic temperature Mater. Manuf. Process.29 754–8

[23] [23] Shi Y, La P Q, Han Y J, Wei F, Sheng J and Li Z N 2019 Rolling tuning microstructure and tensile properties of nano/microcrystalline 304 stainless steel Mod. Phys. Lett. B 33 1950344

[24] [24] Ren Z K, Guo X W, Liu X, Ma X B, Jiang S Y, Bian L P, Wang T and Huang Q X 2022 Effect of pulse current treatment on interface structure and mechanical behavior of TA1/304 clad plates Mater. Sci. Eng. A 850 143583

[25] [25] Wang K H, Wang L L, Zheng K L, He Z B, Politis D J, Liu G and Yuan S J 2020 High-efficiency forming processes for complex thin-walled titanium alloys components: state-of-the-art and perspectives Int. J. Extrem. Manuf.2 032001

[26] [26] Kubin L P and Mortensen A 2003 Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues Scr. Mater.48 119–25

[27] [27] Zhang Z C, Wang F, Yin F, Qian D S, Liu X Y and Wu M 2023 Microstructure evolution and deformation behaviors of pulse electro-assisted deformation in M50 bearing steel J. Mater. Res. Technol.23 4909–21

[28] [28] Zhang T, Jiang F, Huang H, Lu J, Wu Y Q, Jiang Z Y and Xu X P 2021 Towards understanding the brittle-ductile transition in the extreme manufacturing Int. J. Extrem. Manuf.3 022001

[29] [29] Mu˜noz J A, Bolmaro R E, Jorge J A M, Zhilyaev A and Cabrera J M 2020 Prediction of generation of high- and low-angle grain boundaries (HAGB and LAGB) during severe plastic deformation Metall. Mater. Trans. A 51 4674–84

[30] [30] De Moura A N, Alcˆantara C M D, Vieira E A, Rodrigues D G, Da Silva Labiapari W, Da Cunha M A, De Oliveira T R and Orlando M T D 2022 Microstructure and crystallographic texture of martensitic stainless steels after cold rolling and subsequent recrystallization Mater. Charact.192 112190

[31] [31] Mao W M and Zhang X M 1995 Quantitative Texture Analysis of Crystalline Materials (Metallurgical Industry Press) pp 96–118

[32] [32] Wang H S, Yuan G, Kang J, Cao G M, Li C G, Misra R D K and Wang G D 2017 Microstructural evolution and mechanical properties of dual phase steel produced by strip casting Mater. Sci. Eng. A 703 486–95

[33] [33] Zhang Z X, Fu Y W, Wang T, Wang B, Xiong X Y and Wang T X 2023 Prediction of mechanical properties of heat-treated 316l ultra-thin strip based on BP algorithm J. Netshape Form. Eng.15 68–77

[34] [34] Zhao Y, Li W J, Sun Y J and Wang M 2022 Research on size effect of mechanical properties of IF steel during the process of preparing foil by cold rolling Sichuan Metall.44 6–10

[35] [35] Tiwari J, Prasad K, Krishnaswamy H and Amirthalingam M 2023 Energy density to explain the ductility loss during electroplastic deformation of a dual phase steel Mater. Charact.205 113359

[36] [36] Hou J X, Zhang M, Ma S G, Liaw P K, Zhang Y and Qiao J W 2017 Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling Mater. Sci. Eng. A 707 593–601

[37] [37] Lyashenko V, Kobilskaya E and Aniskov A 2015 Copper strip electroplastic rolling Metall. Min. Ind.2 294–9

[38] [38] Liu W H, Lu Z P, He J Y, Luan J H, Wang Z J, Liu B, Liu Y, Chen M W and Liu C T 2016 Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases Acta Mater.116 332–42

[39] [39] Zhang Y L, Yang C, Zhou D S, Zhe Y, Meng L F, Zhu X K and Zhang D L 2019 Effect of stacking fault energy on microstructural feature and back stress hardening in Cu-Al alloys subjected to surface mechanical attrition treatment Mater. Sci. Eng. A 740–741 235–42

[40] [40] Li X P, Tang G Y, Kuang J, Li X H and Zhu J 2014 Effect of current frequency on the mechanical properties, microstructure and texture evolution in AZ31 magnesium alloy strips during electroplastic rolling Mater. Sci. Eng. A 612 406–13

[41] [41] Wang S P, Xiao A, Lin Y H, Cui X H and Sun X M 2022 Effect of induced pulse current on mechanical properties and microstructure of rolled 5052 aluminum alloy Mater. Charact.185 111757

[42] [42] Ferreira P J and Mllner P 1998 A thermodynamic model for the stacking-fault energy Acta Mater.46 4479–84

[43] [43] Song R B, Xiang J Y and Hou D P 2013 Microstructure characteristics and work-hardening mechanism of 316L austenitic stainless steel during cold deformation J. Univ. Sci. Technol.35 55–60

[44] [44] Han C Y, Ye F, Du H Y, Liu B B, Liang Y F, Li H and Li H L 2022 Improved ductility of Fe-6.5 wt%Si alloy under electropulsing tension Mater. Sci. Eng. A 851 143639

[45] [45] Lee M, Yu J, Bae M H, Won J W and Lee T 2021 Accelerated recrystallization behavior of commercially pure titanium subjected to an alternating-current electropulse J. Mater. Res. Technol.15 5706–11

[46] [46] Kuhfuss B, Moumi E, Clausen B, Epp B and Koehler B 2015 Investigation of deformation induced martensitic transformation during incremental forming of 304 stainless steel wires Key Eng. Mater.651–653 645–50