[1] [1] XIAO Z H, YU S J, LI Y M, et al. Materials development and potential applications of transparent ceramics: a review[J]. Materials Science and Engineering: R: Reports, 2020, 139: 100518.

[2] [2] WANG S F, ZHANG J, LUO D W, et al. Transparent ceramics: processing, materials and applications[J]. Progress in Solid State Chemistry, 2013, 41(1/2): 20-54.

[4] [4] YIN D L, WANG J, WANG Y, et al. Fabrication of Er∶Y2O3 transparent ceramics for 2.7 m mid-infrared solid-state lasers[J]. Journal of the European Ceramic Society, 2020, 40(2): 444-448.

[5] [5] LIU Z Y, IKESUE A, LI J. Research progress and prospects of rare-earth doped sesquioxide laser ceramics[J]. Journal of the European Ceramic Society, 2021, 41(7): 3895-3910.

[6] [6] LIU L X, HOU W T, LIU J, et al. Spectroscopic characterization of Yb3+-doped sesquioxide transparent ceramics[J]. Journal of Luminescence, 2024, 275: 120830.

[7] [7] HUANG Z Y, DENG J R, WANG H M, et al. A new method for the preparation of transparent Y2O3 nanocrystalline ceramic with an average grain size of 20 nm[J]. Scripta Materialia, 2020, 182: 57-61.

[8] [8] WANG J, ZHANG J, NING K J, et al. Densification of zirconia doped yttria transparent ceramics using co-precipitated powders[J]. Ceramics International, 2016, 42(9): 10770-10778.

[9] [9] LIU L K, ZHU Q H, ZHU Q Q, et al. Fabrication of fine-grained undoped Y2O3 transparent ceramic using nitrate pyrogenation synthesized nanopowders[J]. Ceramics International, 2019, 45(5): 5339-5345.

[10] [10] NI M, WANG J, MA J, et al. Synthesis of yttria nanopowder with poly acrylic acid as dispersant for highly transparent yttria ceramics[J]. Journal of the American Ceramic Society, 2022, 105(3): 2029-2037.

[11] [11] CHERNOMORETS D G, PIANCASTELLI A, ESPOSITO L, et al. Effect of milling parameters on the morphology and sinterability of the yttrium oxide powders for transparent ceramics[J]. Open Ceramics, 2023, 15: 100391.

[12] [12] WANG J, ZHANG J, LUO D W, et al. Densification and microstructural evolution of yttria transparent ceramics: the effect of ball milling conditions[J]. Journal of the European Ceramic Society, 2015, 35(3): 1011-1019.

[15] [15] OLHERO S M, GANESH I, TORRES P M C, et al. Aqueous colloidal processing of ZTA composites[J]. Journal of the American Ceramic Society, 2009, 92(1): 9-16.

[16] [16] JIN L L, ZHOU G H, SHIMAI S, et al. ZrO2-doped Y2O3 transparent ceramics via slip casting and vacuum sintering[J]. Journal of the European Ceramic Society, 2010, 30(10): 2139-2143.

[17] [17] HOU X R, ZHOU S M, JIA T T, et al. Structural, thermal and mechanical properties of transparent Yb∶(Y0.97Zr0.03)2O3 ceramic[J]. Journal of the European Ceramic Society, 2011, 31(5): 733-738.

[18] [18] HOU X R, ZHOU S M, LI W J, et al. Study on the effect and mechanism of zirconia on the sinterability of yttria transparent ceramic[J]. Journal of the European Ceramic Society, 2010, 30(15): 3125-3129.

[19] [19] YOSHIDA H, KODO M, SOGA K, et al. Doping effect on sinterability of polycrystalline yttria: from the viewpoint of cation diffusivity[J]. Journal of the European Ceramic Society, 2012, 32(12): 3103-3114.

[20] [20] BERNARD-GRANGER G, GUIZARD C, SAN-MIGUEL L. Sintering behavior and optical properties of yttria[J]. Journal of the American Ceramic Society, 2007, 90(9): 2698-2702.

[21] [21] LI X K, XU Y Y, MAO X J, et al. Investigation of optical, mechanical, and thermal properties of ZrO2-doped Y2O3 transparent ceramics fabricated by HIP[J]. Ceramics International, 2018, 44(2): 1362-1369.

[22] [22] HUANG Y H, JIANG D L, ZHANG J X, et al. Sintering of transparent yttria ceramics in oxygen atmosphere[J]. Journal of the American Ceramic Society, 2010, 93(10): 2964-2967.

[23] [23] CAO Y F, LI H Y, ZHENG X Y, et al. Simultaneous precipitation of Zr4+ and Y3+ ions induced refinement of precursors and powders in fabrication of Zr4+ doped Y2O3 transparent ceramics[J]. Optical Materials, 2023, 139: 113802.

[24] [24] GAN L, PARK Y J, ZHU L L, et al. Fabrication and properties of La2O3-doped transparent yttria ceramics by hot-pressing sintering[J]. Journal of Alloys and Compounds, 2017, 695: 2142-2148.

[25] [25] LI X K, MAO X J, FENG M H, et al. Fabrication of transparent La-doped Y2O3 ceramics using different La2O3 precursors[J]. Journal of the European Ceramic Society, 2016, 36(10): 2549-2553.

[26] [26] NING K J, WANG J, LUO D W, et al. New double-sintering aid for fabrication of highly transparent ytterbium-doped yttria ceramics[J]. Journal of the European Ceramic Society, 2016, 36(1): 253-256.

[27] [27] ZHANG L, BEN Y, WU J D, et al. Alumina assisted grain refinement and physical performance enhancement of yttria transparent ceramics by two-step sintering[J]. Materials Science and Engineering: A, 2017, 684: 466-469.

[28] [28] WANG Z Y, ZHANG L, YANG H, et al. Effect of -Al2O3 additives on the microstructure of Y2O3 ceramics[J]. Journal of Materials Science: Materials in Electronics, 2016, 27(4): 3384-3389.

[29] [29] LI X K, ZHU Q Q, XU Y Y, et al. Optical and thermal properties of TiO2-doped Y2O3 transparent ceramics synthesized by hot isostatic pressing[J]. Journal of the American Ceramic Society, 2019, 102(4): 2021-2028.

[30] [30] MENDELSON M I. Average grain size in polycrystalline ceramics[J]. Journal of the American Ceramic Society, 1969, 52(8): 443-446.

[31] [31] CROCOMBETTE J P, JOLLET F. Site selectivity in ZrO2-doped Y2O3 evidenced by X-ray absorption spectra calculations[J]. Journal of Physics: Condensed Matter, 1994, 6(40): 8341-8348.