Fig. 1. Air/Si(111) interface rotation diagram

Fig. 2. (a) SHG response curve of air/Si(111) interface with the pp polarization combination. The circles in the figure represent experimental data points and the solid line represents the fitted curves. (b) Polar map of the air/Si(111) interface. The red circle represents the intensity of the SHG signal and the polar axis represents the angle

Fig. 3. (a) Cyclic voltammogram (CV) curve measured from the Si(111)/CH$$\text{Unknown environment 'document'}$$CN system with a scan rate of 50 mV/s. (b) The Mott-Schottky diagram from the Si(111)/CH$$\text{Unknown environment 'document'}$$CN system measured at 1500 Hz. The red dots are the experimental data, and the red solid line is obtained by fitting using Eq.(5). The experiment temperature was 298 K

Fig. 4. The potential-dependent SHG intensity of the Si(111)/CH$$\text{Unknown environment 'document'}$$CN system at azimuthal angles $$\text{Unknown environment 'document'}$$ = 0$$\text{Unknown environment 'document'}$$, 30$$\text{Unknown environment 'document'}$$ and 60$$\text{Unknown environment 'document'}$$. The red dots are the experimental data, and the black solid line is the fitting curve.