[1] [1] ZHOU M Y, REN L B, FAN L L, et al. Progress in research on hybrid metal matrix composites[J]. J Alloys Compd, 2020, 838: 155274.

[2] [2] TANG S, SHAO S, LIU H, et al. Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles[J]. Mater Sci Eng A, 2021, 804: 140732.

[3] [3] LIU C, SUN J. Erosion behaviour of B4C-based ceramic composites[J]. Ceram Int, 2010, 36(4): 1297-1302.

[4] [4] GHASALI E, ALIZADEH M, EBADZADEH T, et al. Investigation on microstructural and mechanical properties of B4C-aluminum matrix composites prepared by microwave sintering[J]. J Mater Res, 2015, 4(4): 411-415.

[5] [5] RAHIMIAN M, PARVIN N, EHSANI N. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy[J]. Mater Sci Eng A, 2010, 527(4-5): 1031-1038.

[8] [8] GU D, HAGEDORN Y C, MEINERS W, et al. Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by selective laser melting (SLM): densification, growth mechanism and wear behavior[J]. Compos Sci Technol, 2011, 71(13): 1612-1620.

[11] [11] VIALA J C, FORTIER P.Stable and metastable phase equilibria in the chemical interaction between aluminium and silicon carbide[J]. J Mater Sci, 1990, 25: 1842-1850.

[12] [12] YADROITSEV I, KRAKHMALEV P, YADROITSAVA I, et al. Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder[J]. J Mater Process Technol, 2013, 213(4): 606-613.

[14] [14] GUO B, CHEN B, ZHANG X, et al. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes[J]. Carbon, 2018, 135: 224-235.

[15] [15] GüLSOY H. Production of injection moulded 316L stainless steels reinforced with TiC(N) particles[J]. Mater Sci Technol, 2013, 24(12): 1484-1491.

[18] [18] KK M. Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method[J]. Compos Part A, 2006, 37(3): 457-464.

[19] [19] MAZAHERY A, SHABANI M O. Process conditions optimization in Al-Cu alloy matrix composites[J]. Powder Technol, 2012, 225: 101-106.

[20] [20] KUMARAN S T, UTHAYAKUMAR M, ARAVINDAN S, et al. Dry sliding wear behavior of SiC and B4C-reinforced AA6351 metal matrix composite produced by stir casting process[J]. J Mater: Des Appl, 2015, 230(L2): 484-491.

[21] [21] ROFMAN O V, MIKHAYLOVSKAYA A V, KOTOV A D, et al. AA2024/SiC metal matrix composites simultaneously improve ductility and cracking resistance during elevated temperature deformation[J]. Mater Sci Eng A, 2020, 790: 139697.

[22] [22] HASSANEIN W S, SADOUN A, ABUOQAIL A, et al. Effect of SiC addition on the mechanical properties and wear behavior of Al-SiC nanocomposites produced by accumulative roll bonding[J]. Mater Res Express, 2020, 7: 075006.

[23] [23] HEMANTH J. Tribological behavior of cryogenically treated B4Cp/Al-12% Si composites[J]. Wear, 2005, 258: 1732-1744.

[24] [24] WANG H M, TANG F, et al. Microstructure and properties of B4Cp/Al composite prepared by microwave sintering with low temperature[J]. Mater Res Express, 2020, 7: 09651.

[25] [25] Gao M Q, Kang H J, et al. Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites[J]. Mater Sci Eng A, 2019, 744: 682-690.