[1] SIMONS R E, EllSWORTH M J, CHU R C. An assessment of module cooling enhancement with thermoelectric coolers.[J]. Heat Transf, 127, 76-84(2005).

[2] ZHANG H Y, MUI Y C, TARIN M. Analysis of thermoelectric cooler performance for high power electronic package[D]. Appl. Therm. Eng, 30, 561-568(2010).

[3] AVRAM B C, IYENGAR M, KRAUS A D. Design of optimum plate-fin natural convective heat sinks.[J]. Electronic Packag, 125, 208-216(2003).

[4] BELL L E. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems[D]. Science, 321, 1457-1461(2008).

[5] HARMAN T C, TAYLOR P J, WALSH M P et al. Quantum dot superlattice thermoelectric materials and devices[D]. Science, 297, 2229-2232(2002).

[6] CHOWDHURY I, PRASHER R, LOFGREE K et al. On-chip cooling by superlattice-based thin-film thermoelectrics[D]. Nat. nanotechnol, 4, 235-238(2009).

[7] HAO F, QIU P F, TANG Y S et al. High efficiency Bi₂Te₃-based materials and devices for thermoelectric power generation between 100 and 300 ℃[D]. Energy & Environ Sci, 9, 3120-3127(2016).

[8] DISALVO F J. Thermoelectric cooling and power generation[D]. Science, 285, 703-706(1999).

[9] YANG J, STABLER F R. Automotive applications of thermoelectric materials.[J]. Electron. Mater, 38, 1245-1251(2009).

[10] LU Z, LAYANI M, ZHAO X et al. Fabrication of flexible thermoelectric thin film devices by inkjet printing[D]. Small, 10, 3551-3554(2014).

[11] XU B, AGNE M T, FENG T L et al. Nanocomposites from solution- synthesized PbTe-BiSbTe nanoheterostructure with unity figure of merit at low-medium temperatures (500-600 K)[D]. Adv.Mater, 29(2017).

[12] ZHU T J, HU L P, ZHAO X B et al. New insight into intrinsic point defects in V₂VI₃ thermoelectric materials[D]. Adv. Sci, 3(2016).

[13] MADAN D, CHEN A, WRIGHT P K et al. Dispenser printed composite thermoelectric thick films for thermoelectric generator application[D]. J. Appl. Phys, 109(2011).

[14] MADAN D, WANG Z Q, CHEN A et al[D], 104(2014).

[15] KIM S J, WE J H, CHO B J. A wearable thermoelectric generator fabricated on a glass fabric[D]. Energy & Environ Sci, 7, 1959-1965(2014).

[16] VARGHESE T, HOLLAR C, RICHARDSON J et al. High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals[D]. Sci. Rep, 6(2016).

[17] WU H, LIU X, WEI P et al. Fabrication and characterization of brush-printed p-type Bi_0.5Sb_1.5Te₃ thick films for thermoelectric cooling devices.[J]. Electron. Mater, 46, 2950-2957(2016).

[18] SHI J X, CHEN H L, JIA S H et al. Rapid and low-cost fabrication of thermoelectric composite using low-pressure cold pressing and thermocuring methods[D]. Mater. Lett, 212, 299-302(2018).

[19] CAO Z, KOUKHARENKO E, TUDOR M J et al. Flexible screen printed thermoelectric generator with enhanced processes and materials[D]. Sens. Actuators, A, 238, 196-206(2016).

[20] MADAN D, WANG Z Q, CHEN A et al. Enhanced performance of dispenser printed MA n-type Bi₂Te₃ composite thermoelectric generator[D]. ACS Appl. Mater. Inter, 4, 6117-6124(2012).

[21] MADAN D, WANG Z Q, CHEN A et al. High-performance dispenser printed MA p-type Bi_0.5Sb_1.5Te₃ flexible thermoelectric generators for powering wireless sensor networks[D]. ACS Appl. Mater. Inter, 5, 11872-11876(2013).

[22] HOU W K, NIE X L, ZHAO W Y et al. Fabrication and excellent performance of Bi_0.5Sb_1.5Te₃/epoxy flexible thermoelectric cooling devices[D]. Nano Energy, 50, 766-776(2018).

[23] GUO X, JIA X, QIN J et al. Fast preparation and high thermoelectric performance of the stable Bi_0.5Sb_1.5Te₃ bulk materials for different synthesis pressures[D]. Chem. Phys. Lett, 610, 204-208(2014).

[24] SUH D, LEE S, MUN H et al. Enhanced thermoelectric performance of Bi_0.5Sb_1.5Te₃-expanded grapheme composites by simultaneous modulation of electronic and thermal carrier transport[D]. Nano Energy, 13, 67-76(2015).

[25] MADAN D, WANG Z Q, WRIGHT P K et al. Printed flexible thermoelectric generators for use on low levels of waste heat[D]. Appl.Energy, 156, 587-592(2015).

[26] CHEN J C, YAN Z J, WU L Q. Nonequilibrium thermodynamic analysis of a thermoelectric device[D]. Energy, 22, 979-985(1997).

[27] CHEN L G, WU C, SUN F R. Heat transfer effect on the specific cooling load of refrigerators[D]. Appl. Therm. Eng, 16, 989-997(1996).