Journal of Inorganic Materials, Volume. 37, Issue 3, 241(2022)

Research Progress on Powder-based Laser Additive Manufacturing Technology of Ceramics

Jiwei CAO1...2, Pei WANG1,2, Zhiyuan LIU1,2, Changyong LIU1,2, Jiamin WU3,4,*, and Zhangwei CHEN12,* |Show fewer author(s)
Author Affiliations
  • 11. Additive Manufacturing Institute, Shenzhen University, Shenzhen 518060, China
  • 22. Guangdong Key Laboratory of Electromagnetic Control and Intelligent Robot, Shenzhen 518060, China
  • 33. State Key Leboratory of Materials Processing and Die & Mould Technology, College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
  • 44. Engineering Research Center for Additive Manufacturing Ceramic Materials, Ministry of Education, Huazhong University of Science and Technology, Wuhan 430074, China
  • show less
    References(83)

    [5] R DECKARD C.

    [6] U LAKSHMINARAYAN, S OGRYDIZIAK, H MARCUS. Selective Laser Sintering of Ceramic Materials, 16-26(1990).

    [7] U LAKSHMINARAYAN, H MARCUS. Microstructural and Mechanical Properties of Al2O3/P2O5 and Al2O3/B2O3 Composties Fabricated by Selective Laser Sintering, 205-212(1991).

    [12] N HARLAN, M PARK S, L BOURELL D et al. Selective Laser Sintering of Zirconia with Micro-scale Features, 297-302(1999).

    [16] S SHI Y, D CHENG, H LIU J et al. Al2O3/SiO2 composite ceramic parts by selective laser sintering. Journal of Huazhong University of Science and Technology (Nature Science Edition), 35, 20-23(2007).

    [18] K VAIL N, B BALASUBRAMANIAN, W BARLOW J et al. A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders. Rapid Prototyping Journal, 2, 24-40(1996).

    [20] M WU J, N CHEN A, Y LIU M et al. Preparation of ceramic materials used for selective laser sintering and related forming methods. Materials China, 36, 575-582(2017).

    [23] M WOHLERT, D BOURELL. Rapid Prototyping of Mg/SiC Composites by a Combined SLS and Pressureless Infiltration Process, 79-88(1996).

    [30] S SHI Y, K LIU, T HE W et al. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing. Applied Laser, 2013, 7-12.

    [31] Y DU Y, S SHI Y, S WEI Q. Technology and simulation of cold isostatic pressing of selective laser sintered parts. Laser Technology, 38, 96-100(2014).

    [32] T HE W, S WEI Q, K LIU et al. The application of numerical simulation in the SLS/CIP process of alumina ceramics. Materials Science & Technology, 22, 56-60(2014).

    [37] K ZHANG, T ZENG, G XU et al. Mechanical properties of SiCp/SiC composite lattice core sandwich panels fabricated by 3D printing combined with precursor impregnation and pyrolysis. Composite Structures, 240, 12060(2020).

    [57] T MÜHLER, C GOMES, M ASCHERI et al. Slurry-based powder beds for the selective laser sintering of silicate ceramics. J. Ceram. Sci. Technol., 6, 113-118(2015).

    [61] M GRIFFITH, D KEICHER, C ATWOOD et al. Free Form Fabrication of Metallic Components Using Laser Engineered Net Shaping (LENS)(1996).

    [70] H LIU, H SU, Z SHEN et al. Preparation of large-size Al2O3/GdAlO3/ZrO2 ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism. Journal of Materials Science & Technology, 85, 218-223(2021).

    [73] P AGGARANGSI, L BEUTH J. Localized Preheating Approaches for Reducing Residual Stress in Additive Manufacturing(2006).

    [74] Y HAGEDORN, N BALACHANDRAN, W MEINERS et al. SLM of Net-shaped High Strength Ceramics: New Opportunities for Producing Dental Restorations, 536-546(2011).

    [75] Z LIU, K SONG, B GAO et al. Microstructure and mechanical properties of Al2O3/ZrO2 directionally solidified eutectic ceramic prepared by laser 3D printing. Journal of Materials Science & Technology, 32, 320-325(2016).

    [76] J WILKES, C HAGEDORN Y, S OCYLOK et al. Rapid Manufacturing of Ceramic Parts by Selective Laser Melting(2010).

    [80] E DUBINENKO G, L ZINOVIEV A, N BOLBASOV E et al. Preparation of poly(l-lactic acid)/hydroxyapatite composite scaffolds by fused deposit modeling 3D printing. Materials Today: Proceedings, 22, 228-234(2020).

    Tools

    Get Citation

    Copy Citation Text

    Jiwei CAO, Pei WANG, Zhiyuan LIU, Changyong LIU, Jiamin WU, Zhangwei CHEN. Research Progress on Powder-based Laser Additive Manufacturing Technology of Ceramics[J]. Journal of Inorganic Materials, 2022, 37(3): 241

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Sep. 26, 2021

    Accepted: --

    Published Online: Nov. 16, 2022

    The Author Email: WU Jiamin (jiaminwu@hust.edu.cn), CHEN Zhangwei (chen@szu.edu.cn)

    DOI:10.15541/jim20210590

    Topics