Laser & Optoelectronics Progress, Volume. 50, Issue 9, 91201(2013)
Design and Analysis of Back Embedded Adhesive Structure for Mirror Support
[3] [3] Wang Rudong, Tian Wei, Wang Ping, et al.. Effect of temperature change on the surface accuracy of bonded lens[J]. Chinese J Lasers, 2011, 38(8): 0808002.
[7] [7] Herbert J J. Techniques for derivingoptimal bondlines for athermal bonded mounts[C]. SPIE, 2006, 6288: 62880J.
[8] [8] Vukobratovich D, Fetterhoff K A, Myers J R, et al.. Bonded mounts for small cryogenic optics[C]. SPIE, 2000, 4131: 228-239.
[9] [9] Monti C L. Athermal bonded mounts: incorporating aspect ratio into a closed-form solution[C]. SPIE, 2007, 6665: 666503.
[10] [10] Tian Xinghe, Ye Lianhua. Study on the optical epoxystructure adhesive[J]. Adhesion, 1998, 19(5): 11-13.
[11] [11] Wang Qixia, Cheng Gang, Jiang Shilei, et al.. Application of epoxy resin structural adhesive in optical instruments[J]. Adhesion, 2003, 24(3): 33-35.
[13] [13] Zheng Ruiqi. Effect of adhesive thickness on adhesive performance[J]. Adhesion, 1990, 11(4): 30-35.
[14] [14] Zheng Xiaoling, Kong Fanrong, You Min, et al.. Numerical analysis for effect of adhesive thickness on the stress distribution in butt joint[J]. Adhesion, 2004, 25(5): 30-32.
[15] [15] Yang Min, Wang Cuihua, Li Tianshu, et al.. Study on bonding properties of one-component RTV silicone rubber[J]. Adhesion, 2007, 28(5): 26-27.
[16] [16] Wu Lianfeng. Study on Heat-Resistant RTV-1 Silicone Rubber Adhesive[D]. Tianjin: Tianjin University, 2010, 22-35.
[19] [19] Valente T, Richard R. Interference fit equations for lens cell design using elastomeric lens mountings[J]. Opt Eng, 1994, 33(4): 1223-1228.
Get Citation
Copy Citation Text
Liu Bo, Ding Yalin, Jia Jiqiang, Li Dawei, Jin Canqiang. Design and Analysis of Back Embedded Adhesive Structure for Mirror Support[J]. Laser & Optoelectronics Progress, 2013, 50(9): 91201
Category: Instrumentation, Measurement and Metrology
Received: Apr. 2, 2013
Accepted: --
Published Online: Aug. 8, 2013
The Author Email: Bo Liu (liubo1985@gmai.com)