[1] DAHL P, KAUS I, ZHAO Z et al. Densification and properties of zirconia prepared by three different sintering techniques[J]. Ceramic International, 33, 1603-1610(2007).

[2] MUKHOPADHYAY M, MUKHOPADHYAY J, SHARTNA A D et al. High performance planar solid oxide fuel cell fabricated with Ni-yttria stabilized zirconia anode prepared by electroless technique[J]. International Journal of Applied Ceramic Technology, 9, 999-1010(2012).

[3] CHANG W G, SANG S H, JUN S H et al. Investigation of stainless steel 316L/zirconia joint part fabricated by powder injection molding[J]. International Journal of Applied Ceramic Technology, 16, 315-323(2019).

[4] ZHU T B, XIE Z P, HAN Y et al. A novel approach to improve flexural strength of Al₂O₃-20wt% ZrO₂ composites by oscillatory pressure sintering[J]. Journal of the American Ceramic Society, 101, 1397-1401(2018).

[5] KARIHALOO B L. Contribution of t→m phase transformation to the toughening of ZTA[J]. Journal of the American Ceramic Society, 74, 1703-1706(1991).

[6] WANG X Z, MA Z L, SUN X et al. Effects of ZrO₂, and Y₂O₃, on physical and mechanical properties of ceramic bond and ceramic CBN composites[J]. International Journal of Refractory Metals & Hard Materials, 75, 18-24(2018).

[7] BAO Y W, SU S B, YANG J J et al. Pre-stressed ceramics and improvement of impact resistance[J]. Materials Letters, 57, 518-524(2002).

[8] BAO Y W, KUANG F H, SUN Y et al. A simple way to make pre-stressed ceramics with high strength[J]. Journal of Materiomics, 5, 657-662(2019).

[9] BAO Y W, SUN Y, KUANG F H et al. Development and prospects of high strength pre-stressed ceramics[J]. Journal of Inorganic Materials, 35, 399-408(2020).

[10] LI L, WAN L L, ZHOU Q M. Crack propagation during Vickers indentation of zirconia ceramics[J]. Ceramics International, 46, 21311-21318(2020).

[11] GREEN D J. Compressive surface strengthening of brittle materials by a residual stress distribution[J]. Journal of the American Ceramic Society, 66, 807-810(1983).

[12] HIROYUKI M, YOSHIZAWA Y. A reinvestigation of the validity of the indentation fracture (IF) method as applied to ceramics[J]. Journal of the European Ceramic Society, 37, 4437-4441(2017).

[13] Test Method for Fracture Resistance of Silicon Nitride Materials for Rolling Bearing Balls at Room Temperature by Indentation Fracture (IF) Method[standard]. ISO 14627-2012(2012).

[14] HAN Y, LI S, ZHU T B et al. Enhanced properties of pure alumina ceramics by oscillatory pressure sintering[J]. Ceramics International, 44, 5238-5241(2018).

[15] DU W Y, AI Y L, HE W et al. Formation and control of “intragranular” ZrO₂ strengthened and toughened Al₂O₃ ceramics[J]. Ceramics International, 46, 8452-8461(2020).

[16] LI Y L, HYOUN-EE K, YOUNG-HAG K. Improving the surface hardness of zirconia toughened alumina (ZTA) composites by surface treatment with a boehmite sol.[J]. Ceramics International, 38, 2889-2892(2012).

[17] TEBALDO V, GAUTIER G. Influences of evaluation methods and testing load on microhardness and Young’s modulus of ZTA and ATZ ceramics[J]. Ceramics International, 39, 2683-2693(2013).

[18] YAO Y, ZHANG G F. Experimental study on pre-stress grinding process for alumina ceramic[J]. Mining and Metallurgical Engineering, 37, 125-129(2017).

[19] CHAUDHRI M M, CHEN L Y. The catastrophic failure of thermally tempered glass caused by small-particle impact[J]. Nature, 320, 48-50(1986).