[1] [1] MYSIAK J, SURMINSKI S, THIEKEN A, et al. Brief communication: sendai framework for disaster risk reduction-success or warning sign for Paris?[J]. Natural Hazards and Earth System Sciences Discussions, 2015, 3(6): 3955-3966.

[2] [2] ANTUNES M, SANTOS R L, PEREIRA J, et al. Alternative clinker technologies for reducing carbon emissions in cement industry: a critical review[J]. Materials, 2021, 15(1): 209.

[3] [3] SOUSA V, BOGAS J A. Comparison of energy consumption and carbon emissions from clinker and recycled cement production[J]. Journal of Cleaner Production, 2021, 306: 127277.

[5] [5] WU P F, ZENG Q S, LIU X M, et al. Synergistic preparation of high-performance composite blast furnace slag powder from multiple industrial solid wastes: performance regulation and optimization[J]. Construction and Building Materials, 2024, 411: 134231.

[6] [6] DAI J P, WANG Q C, XIE C, et al. The effect of fineness on the hydration activity index of ground granulated blast furnace slag[J]. Materials, 2019, 12(18): 2984.

[7] [7] GHORBANI S, STEFANINI L, SUN Y B, et al. Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements[J]. Cement and Concrete Composites, 2023, 143: 105230.

[8] [8] ETCHEVERRY J M, VILLAGRAN-ZACCARDI Y A, VAN DEN HEEDE P, et al. Effect of sodium sulfate activation on the early age behaviour and microstructure development of hybrid cementitious systems containing Portland cement, and blast furnace slag[J]. Cement and Concrete Composites, 2023, 141: 105101.

[9] [9] ZHAO J H, LI Z H, WANG D M, et al. Hydration superposition effect and mechanism of steel slag powder and granulated blast furnace slag powder[J]. Construction and Building Materials, 2023, 366: 130101.

[11] [11] XIA J L, ZHANG W, DU Y J, et al. Cooperative stabilization of calcium carbonate powder, blast furnace slag, and white cement in composite concrete: volume variation and hydration behavior[J]. Construction and Building Materials, 2024, 450: 138722.

[12] [12] WU J J, TAN Y, LI P, et al. Centrifugal-granulation-assisted thermal energy recovery towards low-carbon blast furnace slag treatment: state of the art and future challenges[J]. Applied Energy, 2022, 325: 119835.

[13] [13] TRIPATHY S K, DASU J, MURTHY Y R, et al. Utilisation perspective on water quenched and air-cooled blast furnace slags[J]. Journal of Cleaner Production, 2020, 262: 121354.

[14] [14] ZBAY E, ERDEMIR M, DURMU H . Utilization and efficiency of ground granulated blast furnace slag on concrete properties: a review[J]. Construction and Building Materials, 2016, 105: 423-434.

[15] [15] WU J J, TAN Y, LI P, et al. Centrifugal-granulation-assisted thermal energy recovery towards low-carbon blast furnace slag treatment: state of the art and future challenges[J]. Applied Energy, 2022, 325: 119835.

[16] [16] ZHANG Y L, LIU X M, XU Y T, et al. Preparation and characterization of cement treated road base material utilizing electrolytic manganese residue[J]. Journal of Cleaner Production, 2019, 232: 980-992.

[17] [17] WANG Y G, LIU X M, ZHANG W, et al. Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer[J]. Journal of Cleaner Production, 2020, 244: 118852.

[18] [18] GAO J M, QIAN C X, LIU H F, et al. ITZ microstructure of concrete containing GGBS[J]. Cement and Concrete Research, 2005, 35(7): 1299-1304.

[19] [19] DUXSON P, FERNNDEZ-JIMNEZ A, PROVIS J L, et al. Geopolymer technology: the current state of the art[J]. Journal of Materials Science, 2007, 42(9): 2917-2933.

[20] [20] WU L S, LI H, MEI H Q, et al. Generation, utilization, and environmental impact of ladle furnace slag: a minor review[J]. Science of the Total Environment, 2023, 895: 165070.

[21] [21] BEN HAHA M, LOTHENBACH B, LE SAOUT G, et al. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag: part II. effect of Al2O3[J]. Cement and Concrete Research, 2012, 42(1): 74-83.

[22] [22] JAMBUNATHAN N, SANJAYAN J G, PAN Z, et al. The role of alumina on performance of alkali-activated slag paste exposed to 50 ℃[J]. Cement and Concrete Research, 2013, 54: 143-150.

[23] [23] CAO J, GU H Z, WU J J, et al. Recycling of Ti and Si from Ti-bearing blast furnace slag and diamond wire saw silicon waste by flux alloying technique[J]. Journal of Environmental Management, 2024, 362: 121302.

[24] [24] HOU H, ZHOU J Z, JI M T, et al. Mechanochemical activation of titanium slag for effective selective catalytic reduction of nitric oxide[J]. Science of the Total Environment, 2020, 743: 140733.

[25] [25] SHEN F M, ZHANG G P, TIAN J J, et al. Effect of TiO2 on the structural properties and viscosity of CaO-SiO2-8.25% MgO-15% Al2O3-TiO2 slags[J]. Journal of Non-Crystalline Solids, 2024, 640: 123114.

[26] [26] YANG Y Y, LI C Y, LI H, et al. Microwave-thermal-assisted curing method on geopolymer preparation from Panzhihua high-titanium slag by alkali activation[J]. Construction and Building Materials, 2023, 400: 132614.

[28] [28] SIDDIQUE R, CACHIM P. Waste and supplementary cementitious materials in concrete[M]. 1st ed. Britain: Woodhead Publishing, 2018: 361.

[29] [29] PAL S C, MUKHERJEE A, PATHAK S R. Investigation of hydraulic activity of ground granulated blast furnace slag in concrete[J]. Cement and Concrete Research, 2003, 33(9): 1481-1486.

[30] [30] GIANNAROS P, KANELLOPOULOS A, AL-TABBAA A. Sealing of cracks in cement using microencapsulated sodium silicate[J]. Smart Materials and Structures, 2016, 25(8): 084005.

[31] [31] LIU Y L, SU Y P, XU G Q, et al. Research progress on controlled low-strength materials: metallurgical waste slag as cementitious materials[J]. Materials, 2022, 15(3): 727.

[32] [32] MENNDEZ G, BONAVETTI V, IRASSAR E F. Strength development of ternary blended cement with limestone filler and blast-furnace slag[J]. Cement and Concrete Composites, 2003, 25(1): 61-67.

[33] [33] JIN F, AL-TABBAA A. Strength and drying shrinkage of slag paste activated by sodium carbonate and reactive MgO[J]. Construction and Building Materials, 2015, 81: 58-65.

[34] [34] ZHU S, HU J G, ZHANG C H, et al. Study on optimization and mechanism of mechanical activation process of titanium-bearing blast furnace slag[J]. Journal of Materials Research and Technology, 2022, 19: 3130-3144.

[35] [35] ZHANG Q, LIU B, WANG S Y, et al. Effect of wet milling activation on mechanical properties and hydration process of cement composites with blast furnace slag[J]. Construction and Building Materials, 2024, 427: 136298.

[36] [36] KUMAR S, KUMAR R, BANDOPADHYAY A, et al. Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of Portland slag cement[J]. Cement and Concrete Composites, 2008, 30(8): 679-685.

[37] [37] SAJEDI F. Mechanical activation of cement-slag mortars[J]. Construction and Building Materials, 2012, 26(1): 41-48.

[38] [38] YANG Z X, XIONG X L, CHEN S H, et al. Effect of fineness on the hydration and microstructure of cementitious materials with high-volume steel slag and blast furnace slag[J]. Journal of Building Engineering, 2023, 72: 106682.

[39] [39] ZHOU H H, WU X Q, XU Z Z, et al. Kinetic study on hydration of alkali-activated slag[J]. Cement and Concrete Research, 1993, 23(6): 1253-1258.

[40] [40] BROUGH A R, ATKINSON A. Sodium silicate-based, alkali-activated slag mortars: part I. strength, hydration and microstructure[J]. Cement and Concrete Research, 2002, 32(6): 865-879.

[41] [41] SAJEDI F, ABDUL RAZAK H. Thermal activation of ordinary Portland cement-slag mortars[J]. Materials & Design, 2010, 31(9): 4522-4527.

[42] [42] MARVILA M T, GARCEZ DE AZEVEDO A R, TOSTES LINHARES J A Jr, et al. Activated alkali cement based on blast furnace slag: effect of curing type and concentration of Na20[J]. Journal of Materials Research and Technology, 2023, 23: 4551-4565.

[43] [43] ZENG Q S, LIU X M, ZHANG Z Q, et al. Synergistic utilization of blast furnace slag with other industrial solid wastes in cement and concrete industry: synergistic mechanisms, applications, and challenges[J]. Green Energy and Resources, 2023, 1(2): 100012.

[44] [44] JIANG T, JIN Y, YE H L. Correlating slag chemistry to setting and mechanical behaviors of alkali-activated slag[J]. Construction and Building Materials, 2022, 338: 127661.

[45] [45] ALIABDO A A, ABD ELMOATY A E M, EMAM M A. Factors affecting the mechanical properties of alkali activated ground granulated blast furnace slag concrete[J]. Construction and Building Materials, 2019, 197: 339-355.

[46] [46] JI X, WANG Z J, WANG X F, et al. Microstructures and properties of alkali-activated slags with composite activator: effects of Na2O equivalents[J]. Journal of Cleaner Production, 2024, 450: 141754.

[47] [47] MANOJSUBURAM R, SAKTHIVEL E, JAYANTHIMANI E. A study on the mechanical properties of alkali activated ground granulated blast furnace slag and fly ash concrete[J]. Materials Today: Proceedings, 2022, 62: 1761-1764.

[48] [48] MARJANOVI N, KOMLJENOVI M, BAAREVI Z, et al. Comparison of two alkali-activated systems: mechanically activated fly ash and fly ash-blast furnace slag blends[J]. Procedia Engineering, 2015, 108: 231-238.

[49] [49] YUAN B, YU Q L, BROUWERS H J H. Evaluation of slag characteristics on the reaction kinetics and mechanical properties of Na2CO3 activated slag[J]. Construction and Building Materials, 2017, 131: 334-346.

[50] [50] BURCIAGA-DAZ O, BETANCOURT-CASTILLO I E, MONTES-ESCOBEDO M E, et al. One-part pastes and mortars of CaO-Na2CO3 activated blast furnace slag: microstructural evolution, cost and CO2 emissions[J]. Construction and Building Materials, 2023, 368: 130431.

[51] [51] MOHAMED O A, NAJM O, ZUAITER H A, et al. Effect of activator concentration on setting time, workability and compressive strength of sustainable concrete with alkali-activated slag binder[J]. Materials Today: Proceedings, 2024

[52] [52] HUBLER M H, THOMAS J J, JENNINGS H M. Influence of nucleation seeding on the hydration kinetics and compressive strength of alkali activated slag paste[J]. Cement and Concrete Research, 2011, 41(8): 842-846.

[53] [53] KRIZAN D, ZIVANOVIC B. Effects of dosage and modulus of water glass on early hydration of alkali-slag cements[J]. Cement and Concrete Research, 2002, 32(8): 1181-1188.

[54] [54] XU Z Q, LI W F, SUN J F, et al. Hydration of Portland cement with alkanolamines by thermal analysis[J]. Journal of Thermal Analysis and Calorimetry, 2018, 131(1): 37-47.

[55] [55] AZAR P, SAMSON G, PATAPY C, et al. Durability of sodium carbonate alkali-activated slag concrete assessed by a performance-based approach[J]. Construction and Building Materials, 2024, 423: 135873.

[56] [56] YU S Y, HE J, SANG G C, et al. Study on hydration process of alkali-activated slag cement activated by weakly alkaline components[J]. Construction and Building Materials, 2024, 413: 134716.

[57] [57] YILMAZ V T, MENEK N, ODABASOLU M. Quantitative determination of triethanolamine in cements[J]. Cement and Concrete Research, 1993, 23(3): 603-608.

[58] [58] CHANG L, LIU H, WANG J F, et al. Effect of chelation via ethanol-diisopropanolamine on hydration of pure steel slag[J]. Construction and Building Materials, 2022, 357: 129372.

[61] [61] HE Y, LIU S H, ZHANG X, et al. Influence of triethanolamine on mechanical strength and hydration performance of blended cement containing fly ash, limestone and slag[J]. Journal of Building Engineering, 2021, 44: 102879.

[62] [62] HAN J G, WANG K J, SHI J Y, et al. Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics[J]. Construction and Building Materials, 2015, 93: 457-462.

[63] [63] HE Y, LIU S H, HOOTON R D, et al. Effects of TEA on rheological property and hydration performance of lithium slag-cement composite binder[J]. Construction and Building Materials, 2022, 318: 125757.

[65] [65] ZOU F B, TAN H B, HE X Y, et al. Effect of triisopropanolamine on compressive strength and hydration of steaming-cured cement-fly ash paste[J]. Construction and Building Materials, 2018, 192: 836-845.

[66] [66] ZHANG Y R, ZHANG X S, CAI X P, et al. A further understanding on the strength development of cement pastes in the presence of triisopropanolamine used in CRTS III slab track[J]. Construction and Building Materials, 2022, 315: 125743.

[67] [67] LU X L, YE Z M, ZHANG L N, et al. The influence of ethanol-diisopropanolamine on the hydration and mechanical properties of Portland cement[J]. Construction and Building Materials, 2017, 135: 484-489.

[68] [68] LU X L, WANG S X, YE Z M, et al. Study on the hydration product of ettringite in cement paste with ethanol-diisopropanolamine[J]. Journal of Thermal Analysis and Calorimetry, 2020, 139(2): 1007-1016.

[69] [69] MA S H, LI W F, ZHANG S B, et al. Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine[J]. Cement and Concrete Research, 2015, 67: 122-130.

[70] [70] ZHAI Q, KURUMISAWA K, MOON J. A comparative study of alkanolamines and inorganic additives on the microstructure development of blast furnace slag blended cement at low curing temperature[J]. Construction and Building Materials, 2023, 408: 133779.

[71] [71] TAN H B, NIE K J, HE X Y, et al. Effect of organic alkali on compressive strength and hydration of wet-grinded granulated blast-furnace slag containing Portland cement[J]. Construction and Building Materials, 2019, 206: 10-18.

[72] [72] DENG X F, GUO H Y, TAN H B, et al. Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate[J]. Ceramics International, 2022, 48(2): 1611-1621.

[73] [73] BARZAGLI F, GIORGI C, MANI F, et al. Reversible carbon dioxide capture by aqueous and non-aqueous amine-based absorbents: a comparative analysis carried out by 13C NMR spectroscopy[J]. Applied Energy, 2018, 220: 208-219.

[74] [74] BARZAGLI F, GIORGI C, MANI F, et al. Comparative study of CO2 capture by aqueous and nonaqueous 2-amino-2-methyl-1-propanol based absorbents carried out by 13C NMR and enthalpy analysis[J]. Industrial & Engineering Chemistry Research, 2019, 58(11): 4364-4373.

[77] [77] WANG D Y, LIU R T, XIE Y J, et al. Fabrication of a laminated felt-like electromagnetic shielding material based on nickel-coated cellulose fibers via self-foaming effect in electroless plating process[J]. International Journal of Biological Macromolecules, 2020, 154: 954-961.

[78] [78] XIN P H, LIU H, WANG J F, et al. Effects of CO2-absorbed triethanolamine solutions on strength development of cement mortars and the mechanism: synergism of cement hydration and carbonation[J]. Construction and Building Materials, 2024, 413: 134708.

[79] [79] LIU H, LIN H, LIU X Y, et al. Mechanism of accelerated self-healing behavior of cement mortars incorporating triethanolamine: carbonation of portlandite[J]. Construction and Building Materials, 2021, 308: 125050.

[80] [80] WU Y X, XU J H, MUMFORD K, et al. Recent advances in carbon dioxide capture and utilization with amines and ionic liquids[J]. Green Chemical Engineering, 2020, 1(1): 16-32.

[81] [81] UTHAMAN S, VISHWAKARMA V, GEORGE R P, et al. Enhancement of strength and durability of fly ash concrete in seawater environments: synergistic effect of nanoparticles[J]. Construction and Building Materials, 2018, 187: 448-459.

[82] [82] ZHANG S, QIAO W G, WU Y, et al. Optimization of microfine-cement-based slurry containing microfine fly ash and nano-CaCO3 for microfracture grouting[J]. Bulletin of Engineering Geology and the Environment, 2021, 80(6): 4821-4839.

[83] [83] HOSAN A, SHAIKH F U A, SARKER P, et al. Nano- and micro-scale characterisation of interfacial transition zone (ITZ) of high volume slag and slag-fly ash blended concretes containing nano SiO2 and nano CaCO3[J]. Construction and Building Materials, 2021, 269: 121311.