[1] [1] Amine K, Kanno R, Tzeng Y. Rechargeable lithium batteries and beyond: progress, challenges, and future directions［J］. MRS bulletin, 2014, 39(5): 395-405.

[2] [2] Goodenough J B, Park K S. The Li-ion rechargeable battery: a perspective［J］. Journal of the American Chemical Society, 2013, 135(4): 1167-1176.

[3] [3] Wang J, Liu Z, Yan G, et al. Improving the electrochemical performance of lithium vanadium fluorophosphate cathode material: focus on interfacial stability［J］. Journal of Power Sources, 2016, 329(15): 553-557.

[4] [4] Goodenough J B. Electrochemical energy storage in a sustainable modern society［J］. Energy & environmental science, 2014, 7(1): 14-18.

[5] [5] Wu X W, Xiang Y H, Peng Q J, et al. A green-low-cost rechargeable aqueous Zinc-ion battery using hollow porous spinel ZnMn2O4 as the cathode material［J］. Journal of Materials Chemistry A, 2017, 5: 17990-17997.

[6] [6] Wang J X, Zhang Q B, Li X H, et al. Three-dimensional hierarchical Co3O4/CuO nanowire heterostructure arrays on nickel foam for high-performance lithium ion batteries［J］. Nano Energy, 2014, 6: 19-26.

[7] [7] Wu X W, Li Y H, Xiang Y H, et al. The electrochemical performance of aqueous rechargeable battery of Zn/Na0.44MnO2based on hybrid electrolyte［J］. Journal of Power Sources, 2016, 336(30): 35-39.

[8] [8] Du K, Hu G R. Review of manganese-based solid solution xLi［Li1/3Mn2/3］O2·(1-x)LiMO2［J］. Chinese Science Bulletin(Chinese Version), 2012, 57(10): 794-804.

[10] [10] Yan J, Liu X, Li B. Recent progress in Li-rich layered oxides as cathode materials for Li-ion batteries［J］. RSC Adv, 2014, 4(108): 63268-63284.

[11] [11] Li B, Yan H, Ma J, et al. Manipulating the electronic structure of Li-rich manganese-based oxide using polyanions:towards better electrochemical performance［J］. Advanced Functional Materials, 2014, 24(32): 5112-5118.

[13] [13] Liu H, Wu Y P, Rahm E, et al. Cathode materials for lithium ion batteries prepared by sol-gel methods［J］. Journal of Solid State Electrochemistry, 2004, 8(7): 450-466.

[14] [14] Qiao Y Q, Wang X L, Mai Y J, et al. Freeze-drying synthesis of Li3V2(PO4)3/C cathode material for lithium-ion batteries［J］. Journal of Alloys & Compounds, 2012, 536: 132-137.

[15] [15] Fang J, Wang S, Yao X, et al. Ration design of porous Mn-doped Na3V2(PO4)3 cathode for high rate and super stable sodium-ion batteries［J］. Electrochimica Acta, 2019, 295: 262-269.

[16] [16] Zheng J M, Xu P H, Gu M, et al. Structural and chemical evolution of Li- and Mn-rich layered cathode material［J］. Chemistry of Materials, 2015, 27(4):1381-1390.

[19] [19] Liu L, Zhang N, Sun K, et al. High rate performance of Li［Ni1/3Co1/3Mn1/3］O2 synthesized via co-precipitation method by different precipitators［J］. Journal of Physics & Chemistry of Solids, 2009, 70(3/4): 727-731.

[24] [24] Wu L, Wang Z X, Li X H, et al. Preparation of Ti4+-doped LiFePO4 by precursor-doping and room temperature reduction Via ball-milling［J］. Journal of Central South University: Science and Technology, 2009, 40(2): 288-293.

[27] [27] Liu H, Chen C, Du C Y, et al. Lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 oxide coated by Li3PO4 and carbon nanocomposite layers as high performance cathode materials for lithium ion batteries［J］. Journal of Materials Chemistry A, 2014, 3(6): 2634-2641.