[1] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012). http://www.tandfonline.com/doi/full/10.1179/1743280411Y.0000000014

[2] Ma Y Y, Liu Y D, Shi W T et al. Effect of scanning speed on forming defects and properties of selective laser melted 316L stainless steel powder[J]. Laser & Optoelectronics Progress, 56, 101403(2019).

[3] Wan L, Wang S Q, Zhang X W et al. Forming quality of titanium alloys by selective laser melting based on partition scanning[J]. Laser & Optoelectronics Progress, 55, 091401(2018).

[4] Carter L N, Martin C, Withers P J et al. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy[J]. Journal of Alloys and Compounds, 615, 338-347(2014). http://www.sciencedirect.com/science/article/pii/S092583881401528X

[5] Catchpole-Smith S, Aboulkhair N, Parry L et al. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys[J]. Additive Manufacturing, 15, 113-122(2017).

[6] Perevoshchikova N, Rigaud J, Sha Y et al. Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert’s design[J]. Rapid Prototyping Journal, 23, 881-892(2017).

[7] Wang H, Zhang X, Wang G B et al. Selective laser melting of the hard-to-weld IN738LC superalloy: efforts to mitigate defects and the resultant microstructural and mechanical properties[J]. Journal of Alloys and Compounds, 807, 151662(2019). http://www.sciencedirect.com/science/article/pii/S0925838819328956

[8] Zhou Y, Duan L C, Wu X L et al. Effect of powder particle size on wear and corrosion resistance of S136 mould steels fabricated by selective laser melting[J]. Laser & Optoelectronics Progress, 55, 101403(2018).

[9] Wu W H, Yang Y Q, Wei G Q. Direct manufacturing of precision metal parts by selective laser melting[J]. China Journal of Lasers, 34, 175-179(2007).

[10] Li K F, Mao X H, Khanlari K et al. Effects of powder size distribution on the microstructural and mechanical properties of a Co-Cr-W-Si alloy fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 825, 153973(2020). http://www.researchgate.net/publication/338821259_Effects_of_powder_size_distribution_on_the_microstructural_and_mechanical_properties_of_a_Co-Cr-W-Si_alloy_fabricated_by_selective_laser_melting

[11] Yang Q, Hu Y, Ding Y T et al. Properties and formability of IN738 alloy powder for selective laser melting[J]. Laser & Optoelectronics Progress, 56, 101402(2019).

[12] Sun J F, Yang Y Q, Yang Z. Study on surface roughness of selective laser melting Ti6Al4V based on powder characteristics[J]. Chinese Journal of Lasers, 43, 0702004(2016).

[13] Nguyen Q B. Nai M L S, Zhu Z G, et al. Characteristics of inconel powders for powder-bed additive manufacturing[J]. Engineering, 3, 695-700(2017).

[14] Wei Q S, Wang L, Zhang S et al[J]. Study on the effects of powder properties on the performance of stainless steel parts produced by selective laser melting Electromachining & Mould, 2011, 52-56, 69.

[15] Spierings A B, Herres N, Levy G. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts[J]. Rapid Prototyping Journal, 17, 195-202(2011). http://www.emeraldinsight.com/doi/full/10.1108/13552541111124770

[16] Gu H F, Gong H J. Dilip J J S, et al. Effects of powder variationon the microstructure and tensile strength of Ti6Al4V parts fabricated by selective laser melting. [C]//International Solid Freeform Fabrication Symposium. Aug. 2014, Austin, USA: FFS, 39, 470-483(2014).

[17] Wang L, Wei Q S, He W T et al. Influence of powder characteristic and process parameters on SLM formability[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 40, 20-23(2012).

[18] Egbewande A T, Zhang H R, Sidhu R K et al. Improvement in laser weldability of INCONEL 738 superalloy through microstructural modification[J]. Metallurgical & Materials Transactions A, 40, 2694-2704(2009).

[19] Campo E, Lupinc V. High temperature structural materials for gas turbines[J]. Metallurgical Science & Technology, 11, 31-45(2013).

[20] Balikci E, Mirshams R A, Raman A. Tensile strengthening in the nickel-base superalloy IN738LC[J]. Journal of Materials Engineering and Performance, 9, 324-329(2000).

[21] Zhong M L, Sun H Q, Liu W J et al. Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy[J]. Scripta Materialia, 53, 159-164(2005). http://www.sciencedirect.com/science/article/pii/S1359646205002022

[22] Sames W J, Unocic K A, Helmreich G W et al. Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing[J]. Additive Manufacturing, 13, 156-165(2017).

[23] Slotwinski J A, Garboczi E J. Metrology needs for metal additive manufacturing powders[J]. JOM, 67, 538-543(2015).

[24] Rickenbacher L, Etter T, Hövel S et al. High temperature material properties of IN738LC processed by selective laser melting (SLM) technology[J]. Rapid Prototyping Journal, 19, 282-290(2013). http://www.emeraldinsight.com/doi/abs/10.1108/13552541311323281

[25] Cloots M, Uggowitzer P J, Wegener K. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles[J]. Materials & Design, 89, 770-784(2016). http://www.sciencedirect.com/science/article/pii/S0264127515306055

[26] Kunze K, Etter T, Grässlin J et al. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)[J]. Materials Science and Engineering: A, 620, 213-222(2015). http://www.sciencedirect.com/science/article/pii/S0921509314012362

[27] Qiu C L, Chen H X, Liu Q et al. On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting[J]. Materials Characterization, 148, 330-344(2019). http://www.sciencedirect.com/science/article/pii/S1044580318331176

[28] Li R D. Research on the key basic issues in selective laser melting of metallic powder[D]. Wuhan: Huazhong University of Science and Technology(2010).

[29] Akram J, Chalavadi P, Pal D et al. Understanding grain evolution in additive manufacturing through modeling[J]. Additive Manufacturing, 21, 255-268(2018).

[30] Tao P, Li H X, Huang B Y et al. The crystal growth, intercellular spacing and microsegregation of selective laser melted Inconel 718 superalloy[J]. Vacuum, 159, 382-390(2019). http://www.sciencedirect.com/science/article/pii/S0042207X18319845

[31] Henderson M B, Arrell D, Larsson R et al. Nickel based superalloy welding practices for industrial gas turbine applications[J]. Science and Technology of Welding and Joining, 9, 13-21(2004). http://www.ingentaconnect.com/content/maney/stwj/2004/00000009/00000001/art00002

[32] Wang N, Mokadem S, Rappaz M et al. Solidification cracking of superalloy single- and bi-crystals[J]. Acta Materialia, 52, 3173-3182(2004).