[1] Levy G N, Schindel R, Kruth J P. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives[J]. CIRP Annals, 52, 589-609(2003).

[2] Kruth J P, Wang X, Laoui T et al. Lasers and materials in selective laser sintering[J]. Assembly Automation, 23, 357-371(2003).

[3] Vasquez G M, Majewski C E, Haworth B et al. A targeted material selection process for polymers in laser sintering[J]. Additive Manufacturing, 1/2/3/4, 127-138(2014).

[4] Shi Y, Chen J, Wang Y et al. Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement[J]. Journal of Materials: Design and Applications, 221, 37-42(2007).

[5] Wu H, Fahy W P, Kim S et al. Recent developments in polymers/polymer nanocomposites for additive manufacturing[J]. Progress in Materials Science, 111, 100638(2020).

[6] Goodridge R D, Tuck C J, Hague R J M. Laser sintering of polyamides and other polymers[J]. Progress in Materials Science, 57, 229-267(2012).

[7] Ziegelmeier S, Christou P, Wöllecke F et al. An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties[J]. Journal of Materials Processing Technology, 215, 239-250(2015).

[8] Kruth J P, Levy G, Klocke F et al. Consolidation phenomena in laser and powder-bed based layered manufacturing[J]. CIRP Annals, 56, 730-759(2007).

[9] Li Z H, Zhu F, Xu H Y et al. Effect of powder recycling on hardness and impact toughness of polyamide formed by selective laser sintering[J]. Chinese Journal of Lasers, 45, 0502010(2018).

[10] Schmidt M, Pohle D, Rechtenwald T. Selective laser sintering of PEEK[J]. CIRP Annals, 56, 205-208(2007).

[11] Gu H, Bashir Z, Yang L T. The re-usability of heat-exposed poly (ethylene terephthalate) powder for laser sintering[J]. Additive Manufacturing, 28, 194-204(2019).

[12] Thelakkadan A S, Bashir Z. Fabrication of crystalline articles of aromatic polycarbonate by hot powder-compaction[J]. Polymer Engineering & Science, 57, 581-590(2017).

[13] Schmid M, Wegener K. Additive manufacturing: polymers applicable for laser sintering (LS)[J]. Procedia Engineering, 149, 457-464(2016).

[14] Ghita O, James E, Davies R et al. High Temperature Laser Sintering (HT-LS): an investigation into mechanical properties and shrinkage characteristics of Poly (Ether Ketone) (PEK) structures[J]. Materials & Design, 61, 124-132(2014).

[15] Berretta S, Evans K E, Ghita O. Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)[J]. European Polymer Journal, 68, 243-266(2015).

[16] Hoskins T J, Dearn K D, Kukureka S N. Mechanical performance of PEEK produced by additive manufacturing[J]. Polymer Testing, 70, 511-519(2018).

[17] Ghita O R, James E, Trimble R et al. Physico-chemical behaviour of poly (ether ketone) (PEK) in high temperature laser sintering (HT-LS)[J]. Journal of Materials Processing Technology, 214, 969-978(2014).

[18] Blundell D J, Osborn B N. The morphology of poly (aryl-ether-ether-ketone)[J]. Polymer, 24, 953-958(1983).

[19] Mylläri V, Ruoko T P, Vuorinen J et al. Characterization of thermally aged polyetheretherketone fibres-mechanical, thermal, rheological and chemical property changes[J]. Polymer Degradation and Stability, 120, 419-426(2015).

[20] Wang D, Fan L S. Particle characterization and behavior relevant to fluidized bed combustion and gasification systems[M]. Scala F. Fluidized bed technologies for near-zero emission combustion and gasification, 42-76(2013).

[21] Sobieraj M C, Rimnac C M. Fracture, fatigue, and Notch behavior of PEEK[M]. Kurtz S M. PEEK biomaterials handbook, 61-73(2012).

[22] Dupin S, Lame O, Barrès C et al. Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering[J]. European Polymer Journal, 48, 1611-1621(2012).

[23] Stichel T, Frick T, Laumer T et al. A Round Robin study for Selective Laser Sintering of polyamide 12: microstructural origin of the mechanical properties[J]. Optics & Laser Technology, 89, 31-40(2017).

[24] Xia L, Xiong J S, Shentu B Q et al. Thermal-oxidative degradation and accelerated aging behavior of polyamide 6/epoxy resin-modified montmorillonite nanocomposites[J]. Journal of Applied Polymer Science, 131, 40825(2014).

[25] Xie R D, Zhu J W, Zhong Q et al. Prediction of laser selective sintering temperature based on neural network[J]. Laser & Optoelectronics Progress, 59, 1916005(2022).

[26] Wu H H, He J C, Li Y F et al. Selective laser sintering of natural flake graphite prototype forming process research[J]. Laser & Optoelectronics Progress, 58, 0914005(2021).

[27] Van Hooreweder B, De Coninck F, Moens D et al. Microstructural characterization of SLS-PA12 specimens under dynamic tension/compression excitation[J]. Polymer Testing, 29, 319-326(2010).

[28] Jauffrès D, Lame O, Vigier G et al. Mechanical and physical characterization of polyoxymethylene processed by high-velocity compaction[J]. Journal of Applied Polymer Science, 106, 488-497(2007).

[29] Li J C, Zhao Z, Yan R et al. Process parameter optimization and mechanical properties of PA12/HA porous scaffold based on SLS[J]. Chinese Journal of Lasers, 46, 1102003(2019).

[30] Estevez R, Tijssens M G A, Van der Giessen E. Modeling of the competition between shear yielding and crazing in glassy polymers[J]. Journal of the Mechanics and Physics of Solids, 48, 2585-2617(2000).

[31] Abbott C S, Sperry M, Crane N B. Relationships between porosity and mechanical properties of polyamide 12 parts produced using the laser sintering and multi-jet fusion powder bed fusion processes[J]. Journal of Manufacturing Processes, 70, 55-66(2021).

[32] Hu P, Ai L, Qiu Z Y et al. Research progress of laser ultrasonic nondestructive testing for metal additive manufacturing components[J]. Chinese Journal of Lasers, 49, 1402803(2022).

[33] Duan L M, Fang C, Luo X Q et al. Direct generation of triangular mesh finite element model from industrial CT images[J]. Acta Optica Sinica, 41, 1411002(2021).