[1] [1] WANG D H, SHI C J, WU Z M, et al. A review on ultra high performance concrete: part II. Hydration, microstructure and properties[J]. Constr Build Mater, 2015, 96: 368-377.

[2] [2] TAFRAOUI A, ESCADEILLAS G, VIDAL T. Durability of the ultra high performances concrete containing metakaolin[J]. Constr Build Mater, 2016, 112: 980-987.

[3] [3] MENG W N, VALIPOUR M, KHAYAT K H. Optimization and performance of cost-effective ultra-high performance concrete[J]. Mater Struct, 2017, 50(1): 29.

[5] [5] YOO D Y, YOON Y S. A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete[J].Int J Concr Struct Mater, 2016, 10(2): 125-142.

[6] [6] LIU J Z, WANG K J, ZHANG Q Q, et al. Influence of superplasticizer dosage on the viscosity of cement paste with low water-binder ratio[J]. Constr Build Mater, 2017, 149: 359-366.

[7] [7] TENG L, MENG W N, KHAYAT K H. Rheology control of ultra-high-performance concrete made with different fiber contents[J]. Cem Concr Res, 2020, 138: 106222.

[8] [8] YU R, ZHOU F J, YIN T Y, et al. Uncovering the approach to develop ultra-high performance concrete (UHPC) with dense meso-structure based on rheological point of view: experiments and modeling[J]. Constr Build Mater, 2021, 271: 121500.

[9] [9] HUANG H H, GAO X J, JIA D. Effects of rheological performance, antifoaming admixture, and mixing procedure on air bubbles and strength of UHPC[J]. J Mater Civ Eng, 2019, 31(4).

[10] [10] DILS J, BOEL V, DE SCHUTTER G. Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC[J]. Constr Build Mater, 2013, 41: 455-463.

[11] [11] DILS J, BOEL V, SCHUTTER G. Vacuum mixing technology to improve the mechanical properties of ultra-high performance concrete[J].Mater Struct, 2015, 48(11): 3485-3501.

[13] [13] OZOLINS E, ZAVICKIS J, LUKASENOKS A, et al. Compressive strength and rheology dependency on micro silica dosage in ultra-high-performance concrete[A]//20th International Scientific Conference on Engineering for Rural Development[C]. Jelgava, Latvia, 2021: 483-492.

[14] [14] WANG R, GAO X J, ZHANG J Y, et al. Spatial distribution of steel fibers and air bubbles in UHPC cylinder determined by X-ray CT method[J]. Constr Build Mater, 2018, 160: 39-47.

[15] [15] CAI Y X, LIU Q F, YU L W, et al. An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration[J]. Cem Concr Compos, 2021, 122: 104153.

[16] [16] WANG R, GAO X J, HUANG H H, et al. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC[J]. Constr Build Mater, 2017, 144: 65-73.

[17] [17] ABBAS S, SOLIMAN A M, NEHDI M L. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages[J]. Constr Build Mater, 2015, 75: 429-441.

[18] [18] RAGALWAR K A, NGUYEN H, RANADE R, et al. Influence of Distribution Modulus of Particle Size Distribution on Rheological and Mechanical Properties of Ultra-High-Strength SHCC Matrix[A]//4th International RILEM Conference on Strain-Hardening Cement-Based Composites (SHCC)[C]. Tech Univ Dresden, Dresden, Germany, 2018: 221-229.

[19] [19] ARORA A, AGUAYO M, HANSEN H, et al. Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC)[J]. Cem Concr Res, 2018, 103: 179-190.

[20] [20] BAUMERT C, GARRECHT H. Minimization of the influence of shear-induced particle migration in determining the rheological characteristics of self-compacting mortars and concretes[J]. Materials, 2020, 13(7): 1542.

[24] [24] FERRARA L, CREMONESI M, TREGGER N, et al. On the identification of rheological properties of cement suspensions: Rheometry, Computational Fluid Dynamics modeling and field test measurements[J]. Cem Concr Res, 2012, 42(8): 1134-1146.

[26] [26] WU Z M, KHAYAT K, SHI C. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content[J]. Cem Concr Res, 2019, 123:105786.

[27] [27] FEYS D, KHAYAT K H, PEREZ-SCHELL A, et al. Prediction of pumping pressure by means of new tribometer for highly-workable concrete[J]. Cem Concr Compos, 2015, 57: 102-115.

[29] [29] NEHDI M, RAHMAN M A. Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction[J]. Cem Concr Res, 2004, 34(11): 1993-2007.

[30] [30] YAHIA A, KHAYAT K H. Analytical models for estimating yield stress of high-performance pseudoplastic grout[J]. Cem Concr Res, 2001, 31(5): 731-738.

[31] [31] YAHIA A, KHAYAT K H. Applicability of rheological models to high-performance grouts containing supplementary cementitious materials and viscosity enhancing admixture[J]. Mat Struct, 2003, 36(6): 402-412.

[35] [35] Yalcinkaya C, Felekoglu B, Yazici H. Influence of aggregate volume on the shrinkage, rheological and mechanical properties of ultra-high performance concrete[J]. J Fac Eng Archit Gaz, 2020, 35(4): 1701-1718.

[36] [36] ZHU J, LIU J P, KHAYAT K H, et al. Mechanisms affecting viscosity of cement paste made with microfines of manufactured sand[J]. Cem Concr Res, 2022, 156: 106757.

[37] [37] XIONG X, WU M M, SHEN W G, et al. Performance and microstructure of ultra-high-performance concrete (UHPC) with silica fume replaced by inert mineral powders[J]. Constr Build Mater, 2022, 327: 126996.

[38] [38] LIN Y Z, YAN J C, WANG Z F, et al. Effect of silica fumes on fluidity of UHPC: experiments, influence mechanism and evaluation methods[J]. Constr Build Mater, 2019, 210: 451-460.

[39] [39] SUN H, QUE Z C, WEI H N, et al. Tunning matrix rheology and mechanical performance of ultra-high performance concrete using cellulose nanofibers[J]. Nanotechnol Rev, 2022, 11(1): 1570-1582.

[40] [40] ABDELRAZIK A T, KHAYAT K H. Effect of fiber characteristics on fresh properties of fiber-reinforced concrete with adapted rheology[J]. Constr Build Mater, 2020, 230: 116852.

[41] [41] MENG W N, KHAYAT K H. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC[J]. Cem Concr Res, 2018, 105: 64-71.

[42] [42] LIU J H, KHAYAT K H, SHI C J. Effect of superabsorbent polymer characteristics on rheology of ultra-high performance concrete[J]. Cem Concr Compos, 2020, 112: 103636.

[43] [43] RAGALWAR K, HEARD W F, WILLIAMS B A, et al. Significance of the particle size distribution modulus for strain-hardening-ultra-high performance concrete (SH-UHPC) matrix design[J]. Constr Build Mater, 2020, 234: 117423.

[45] [45] ZHOU M, WU Z M, OUYANG X, et al. Mixture design methods for ultra-high-performance concrete - a review[J]. Cem Concr Compos, 2021, 124: 104242.

[50] [50] YAMADA K. Basics of analytical methods used for the investigation of interaction mechanism between cements and superplasticizers[J]. Cem Concr Res, 2011, 41(7): 793-798.

[51] [51] Gelardi G, Flatt R J. 11 - Working mechanisms of water reducers and superplasticizers[A]//Atcin P-C, Flatt R J, ed. Science and Technology of Concrete Admixtures[M]. Woodhead Publishing, 2016: 257-278.

[52] [52] SADRMOMTAZI A, TAJASOSI S, TAHMOURESI B. Effect of materials proportion on rheology and mechanical strength and microstructure of ultra-high performance concrete (UHPC)[J]. Constr Build Mater, 2018, 187: 1103-1112.

[55] [55] SCHRFL C, GRUBER M, PLANK J. Preferential adsorption of polycarboxylate superplasticizers on cement and silica fume in ultra-high performance concrete (UHPC)[J]. Cem Concr Res, 2012, 42(11): 1401-1408.

[56] [56] PLANK J, SCHROEFL C, GRUBER M, et al. Effectiveness of polycarboxylate superplasticizers in ultra-high strength concrete: the importance of PCE compatibility with silica fume[J]. J Adv Concr Technol, 2009, 7(1): 5-12.

[57] [57] PLANK J, SACHSENHAUSER B, DE REESE J. Experimental determination of the thermodynamic parameters affecting the adsorption behaviour and dispersion effectiveness of PCE superplasticizers[J]. Cem Concr Res, 2010, 40(5): 699-709.

[58] [58] ANDERSEN P J, ROY D M, GAIDIS J M. The effect of superplasticizer molecular weight on its adsorption on, and dispersion of, cement[J]. Cem Concr Res, 1988, 18(6): 980-986.

[59] [59] UCHIKAWA H, HANEHARA S, SHIRASAKA T, et al. Effect of admixture on hydration of cement, adsorptive behavior of admixture and fluidity and setting of fresh cement paste[J]. Cem Concr Res, 1992, 22(6): 1115-1129.

[62] [62] ZHAO M, ZHANG X, ZHANG Y J. Effect of free water on the flowability of cement paste with chemical or mineral admixtures[J]. Constr Build Mater, 2016, 111: 571-579.

[63] [63] PYO S, KIM H K. Fresh and hardened properties of ultra-high performance concrete incorporating coal bottom ash and slag powder[J]. Constr Build Mater, 2017, 131: 459-466.

[64] [64] LONG G, WANG X Y, XIAO R, et al. The influences of ultra-fine powders on the compatibility of cement and superplasticiser with very low water/binder ratio[J]. Adv Cem Res, 2003, 15(1): 17-21.

[65] [65] WANG Q, WANG D Q, CHEN H H. The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete[J]. Cem Concr Compos, 2017, 83: 125-137.

[68] [68] VIKAN H, JUSTNES H. Rheology of cementitious paste with silica fume or limestone[J]. Cem Concr Res, 2007, 37(11): 1512-1517.

[70] [70] BAHRAMI N, ZOHRABI M, ALI MAHMOUDY S, et al. Optimum recycled concrete aggregate and micro-silica content in self-compacting concrete: Rheological, mechanical and microstructural properties[J]. J Build Eng, 2020, 31: 101361.

[71] [71] Yan H E, Zhang X, Zhang Y, et al. Effect of Remnant Carbon on Rheological Properties of Cement Paste with FDN Superplasticizer Added[J]. J Build Mater, 2014, 17(3): 507-510, 525.

[72] [72] CHANDARA C, SAKAI E, AZIZLI K A M, et al. The effect of unburned carbon in palm oil fuel ash on fluidity of cement pastes containing superplasticizer[J]. Constr Build Mater, 2010, 24(9): 1590-1593.

[73] [73] CHOI M S, KIM Y J, KWON S H. Prediction on pipe flow of pumped concrete based on shear-induced particle migration[J]. Cem Concr Res, 2013, 52: 216-224.

[75] [75] KHAYAT K H, MENG W N, VALLURUPALLI K, et al. Rheological properties of ultra-high-performance concrete-an overview[J]. Cem Concr Res, 2019, 124: 105828.

[76] [76] WENG Y W, LI M Y, TAN M J, et al. Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model[J]. Constr Build Mater, 2018, 163: 600-610.

[78] [78] YOSHIOKA K, TAZAWA E I, KAWAI K J, et al. Adsorption characteristics of superplasticizers on cement component minerals[J]. Cem Concr Res, 2002, 32(10): 1507-1513.

[79] [79] Nikola Mikanovic, Jeff Sharman, Carmel jolicoeur, et al. Compatibility of viscosity-enhancing agents and superplasticizers in cementitious and model systems: rheology, bleeding, and segregation[A]//9th International Conference on Superplasticizers and Other Chemical Admixtures in Concrete[C]. Seville, Spain, 2009: 67-85.

[81] [81] ADJOUDJ M, EZZIANE K, KADRI E H, et al. Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer[J]. Constr Build Mater, 2014, 70: 549-559.

[82] [82] VANCE K, KUMAR A, SANT G, et al. The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash[J]. Cem Concr Res, 2013, 52: 196-207.

[86] [86] YU R, SPIESZ P, BROUWERS H J H. Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)[J]. Cem Concr Res, 2014, 56: 29-39.

[87] [87] MARTINIE L, ROSSI P, ROUSSEL N. Rheology of fiber reinforced cementitious materials: classification and prediction[J]. Cem Concr Res, 2010, 40(2): 226-234.

[89] [89] MENG W N, KHAYAT K H. Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar[J]. Compos B Eng, 2017, 117: 26-34.

[90] [90] LI Z G, ZHANG H, WANG R. Influence of steel fiber distribution on splitting damage and transport properties of ultra-high performance concrete[J]. Cem Concr Compos, 2022, 126: 104373.

[91] [91] WU Z M, SHI C J, HE W, et al. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete[J]. Constr Build Mater, 2016, 103: 8-14.

[92] [92] SULTANGALIYEVA F, CARR H, LA BORDERIE C, et al. Influence of flexible fibers on the yield stress of fresh cement pastes and mortars[J]. Cem Concr Res, 2020, 138: 106221.

[93] [93] YAMANOI M, MAIA J M. Analysis of rheological properties of fibre suspensions in a Newtonian fluid by direct fibre simulation. Part1: rigid fibre suspensions[J]. J Non Newton Fluid Mech, 2010, 165(19-20): 1055-1063.

[94] [94] YU R, SPIESZ P, BROUWERS H J H. Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): experiments and modeling[J]. Constr Build Mater, 2014, 68: 158-171.

[96] [96] BOULEKBACHE B, HAMRAT M, CHEMROUK M, et al. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material[J]. Constr Build Mater, 2010, 24(9): 1664-1671.

[97] [97] CAO M L, XU L, ZHANG C. Rheological and mechanical properties of hybrid fiber reinforced cement mortar[J]. Constr Build Mater, 2018, 171: 736-742.