[1] [1] DUAN J H, SHI Y Y, ZHANG J F, et al.. Flexible polishing technology for blade of aviation engine［J］. Acta Aeronautica et Astronautica Sinica, 2012, 33(3): 573-578. (in Chinese)

[2] [2] FANG J G, MA Y L, LI D, et al.. Intelligent method of machining-measuring integration for aero-engine elliptical blade-edges［J］. Aviation Precision Manufacturing Technology, 2016, 52(6): 1-6, 12. (in Chinese)

[3] [3] PEI J D, WANG W H, WANG SH, et al.. Elliptical leading edge fitting strategy of elementary blade profile［J］. Computer Engineering and Applications, 2015, 51(3): 243-246. (in Chinese)

[4] [4] CHEN L, CHEN J, ZHAO SH L, et al.. Effect of blade leading edge on aerodynamic performance of turbine［J］. Journal of Aerospace Power, 2013, 28(4): 921-929. (in Chinese)

[5] [5] LIU J, ZHAO J, YANG X, et al.. A reconstruction algorithm for blade surface based on less measured points［J］. International Journal of Aerospace Engineering, 2015, 2015: 431824.

[6] [6] ZHANG CH, NING T, SHEN Y CH, et al.. Machining the leading and trailing surface of turbine blades by the bottom of the flat-end cutter［J］. Journal of Graphics, 2015, 36(6): 834-839. (in Chinese)

[7] [7] SUN B, LI B. A rapid method to achieve aero-engine blade form detection［J］. Sensors, 2015, 15(12): 12782-12801.

[8] [8] LIN X J, SHAN CH W, WANG Z Q, et al.. Measurement techniques of coordinate measuring machine for blade surface of aero-engine［J］. Computer Integrated Manufacturing Systems, 2012, 18(1): 125-131. (in Chinese)

[9] [9] XIANG ZH C, HU ZH, BAI Y L, et al.. High-precision measurement for the three-dimensional profile of gas turbine blade’s leading edge［J］. Journal of Aerospace Power, 2016, 31(7): 1761-1765. (in Chinese)

[10] [10] VUYE C, VANLANDUIT S, PRESEZNIAK F, et al.. Optical measurement of the dynamic strain field of a fan blade using a 3D scanning vibrometer［J］. Optics and Lasers in Engineering, 2011, 49(7): 988-997.

[11] [11] MOUSSAVI S A, BENISI A H, DURALI M. Effect of splitter leading edge location on performance of an automotive turbocharger compressor［J］. Energy, 2017, 123: 511-520.

[12] [12] LI B, SUN B, CHEN L, et al.. Application of laser displacement sensor to free-form surface measurement［J］. Opt. Precision Eng., 2015, 23(7): 1939-1947. (in Chinese)

[13] [13] BI CH, FANG J G, LIU J L, et al.. Calibration of beam direction of laser displacement sensor based on spherical target［J］. Opt. Precision Eng., 2015, 23(3): 678-685. (in Chinese)

[14] [14] LIN A C, CHANG H C. Automatic 3D measuring system for optical scanning of axial fan blades［J］. International Journal of Advanced Manufacturing Technology, 2011, 57(5-8): 701-717.

[15] [15] YU H, ZHANG J M, PANG CH T, et al.. Research on blade edge measuring techniques based on points cloud registration［J］. Aviation Precision Manufacturing Technology, 2014, 50(1): 23-26. (in Chinese)