[1] [1] CHAND T, DEBNATH S K, RAYAGOND S K, et al.. Design of refractive head-up display system using rotational symmetric aspheric optics［J］. Optik, 2017, 131: 515-519.

[2] [2] AUSTIN R L, DENNING B S, DREWS B C, et al.. Qualified viewing space determination of near-eye and head-up displays［J］. Journal of the Society for Information Display, 2018, 26(9): 567-575.

[3] [3] LI J G. Study of Optical Efficiency of LED Backlight Module［D］. Quanzhou: Huaqiao University, 2012. (in Chinese)

[4] [4] FENG Q B, LI Y N, LI Q G, et al.. Secondary optical design for LED backlight luminance improvement of helmet-mounted display［J］. Journal of Display Technology, 2016, 12(6): 577-582.

[5] [5] GANNON C, LIANG R G. Using spherical harmonics to describe large-angle freeform lenses［J］. Applied Optics, 2018, 57(28): 8143-8147.

[6] [6] ZHAO Z L, ZHANG H H, ZHENG H, et al.. New reversing freeform lens design method for LED uniform illumination with extended source and near field［J］. Optics Communications, 2018, 410: 123-129.

[7] [7] ZHENG J B, QIAN K Y. Designing single LED illumination distribution for direct-type backlight［J］. Applied Optics, 2013, 52(28): 7022-7027.

[8] [8] KIM B, KIM J, OHM W S. Eliminating hotspots in a multi-chip LED array direct backlight system with optimal patterned reflectors for uniform illuminance and minimal system thickness［J］. Optics Express, 2010, 18(8): 8595-8604.

[9] [9] CHEN B T, PAN J W. High-efficiency directional backlight design for an automotive display［J］. Applied Optics, 2018, 57(16): 4386-4395.

[10] [10] YEON J, LEE J H, LEE H S, et al.. An effective light-extracting microstructure for a single-sheet backlight unit for liquid crystal display［J］. Journal of Micromechanics and Microengineering, 2012, 22(9): 095006.

[11] [11] ZHANG R. Directional backlighting system using a light guide with paired microstructures［J］. Applied Optics, 2017, 56(24): 6735-6741.

[12] [12] PARK S R, KWON O J, SHIN D, et al.. Grating micro-dot patterned light guide plates for LED backlights［J］. Optics Express, 2007, 15(6): 2888-2899.

[13] [13] HUANG B L, GUO T L. Integrated backlight module to provide a collimated and uniform planar light source［J］. Applied Optics, 2016, 55(26): 7307-7313.

[14] [14] SEKIGUCHI Y, KONNO A, TSUMURA M. Design method for a thin uniform direct backlight using a diffuser plate with a pattern on the surface and optical films［J］. Applied Optics, 2015, 54(3): 482-491.

[15] [15] TENG T C, LAI W C. Optimization of an optical film for highly collimating the emerging light［J］. Journal of Display Technology, 2015, 11(4): 386-394.

[16] [16] QIN Z. Luminance enhancement without sacrificing the viewing angle in a direct-lit backlight by addressing the angle-dependent characteristic of the prism film［J］. Displays, 2017, 50: 49-56.

[17] [17] SU SH, ZHANG G Y, WANG L Y, et al.. Solar simulator based on LED array light source［J］. Opt. precision Eng., 2018,26(2): 307-315. (in Chinese)

[18] [18] LAN H B, GUO L L, XU Q, et al.. Wafer-level composite mold for large-area nanoimprint lithography［J］. Opt. Precision Eng., 2018, 26(4): 894-905. (in Chinese)