[1] [1] YU R N. Analysis of fine_gear industry［C］. Years proceedings of CGMA2007. Years of CGMA, Zhejiang Zhuji: CGMA, 2007-10: 34-38. (in Chinese)

[2] [2] WANG L D, LING S Y, MA Y, et al.. Processing methods of precision and ultra-precision cylindrical involute gear［J］. Opt.Precision Eng., 2009, 17(02): 321-325.(in Chinese)

[3] [3] WANG L D, LU ZH SH. Development of normal master gear with modulus 2［J］. Opt. Precision Eng., 1982, (4): 28-34. (in Chinese)

[4] [4] LIU B, MA Y, LING S Y, et al.. Error separation method of precise gear-measuring mandrel ［J］. Tool Engineering, 2010, 44(03): 92-95.(in Chinese)

[5] [5] QIN B CH, PANG X D. How to Grind Gear Shaving Cutter［M］. Beijing: China Machine Press, 1977: 11-12. (in Chinese)

[6] [6] Editor Group of Gear Grinding Principle. Gear Grinding Principle［M］. Beijing: China Machine Press, 1977: 170-173. (in Chinese)

[7] [7] WANG L D, LING S Y, MA Y, et al.. Effects of comprehensive eccentricity of involute cam on gear profile deviations［J］. Chinese Journal of Mechanical Engineering, 2011, 24(3): 392-398.

[8] [8] WANG L D. Study of gear pitch accuracy on gear grinder with indexing plate［J］. Precise Manufacturing & Automation, 1981, 3: 35-41. (in Chinese)

[9] [9] LING S Y, WANG L D, MA Y, et al.. Effect of cone-shaped error of flat-faced wheel’s grinding face on gear profile deviation［J］. Manufacturing Technology & Machine Tool, 2010(8): 116-120. (in Chinese)

[10] [10] LING S Y, WANG L D, MA Y, et al.. Improving gear helix accuracy by controlling cone-shaped error of flat-faced wheel’s grinding face ［J］. Opt.Precision Eng., 2010, 18(3): 630-636.(in Chinese)

[11] [11] LING S Y, WANG L D, MA Y, et al.. Experimental study on the influence of belt tightness on grinder Y7125’s vibration ［J］. Journal of Vibration, Measurenent & Diagnosis, 2010, 30(5): 525-528. (in Chinese)

[12] [12] WANG Q N, MA Y, LING S Y. Experimental study on the influence of number of damping sheets on grinder Y7125’s vibration ［J］. Noise and Vibration Control, 2010, 30(5): 34-38. (in Chinese)