[1] DAROLIA R. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects[J]. International Materials Reviews, 58, 315-348(2013).

[2] CURRY N, MARKOCSAN N, LI X H et al. Next generation thermal barrier coatings for the gas turbine industry[J]. Journal of Thermal Spray Technology, 20, 108-115(2011).

[3] STӦVER D, PRACHT G, LEHMANN H et al. New material concepts for the next generation of plasma-sprayed thermal barrier coatings[J]. Journal of Thermal Spray Technology, 13, 76-83(2004).

[4] XUE Z L, GUO H B, GONG S K et al. Novel ceramic materials for thermal barrier coatings[J]. Journal of Aeronautical Materials, 38, 10-20(2018).

[5] CURRY N, JANIKOWSKI W, PALA Z et al. Impact of impurity content on the sintering resistance and phase stability of dysprosia- and yttria-stabilized zirconia thermal barrier coatings[J]. Journal of Thermal Spray Technology, 23, 160-169(2014).

[6] LYU G, CHOI B G, LU Z et al. Effect of thermal cycling frequency on the durability of Yb-Gd-Y-based thermal barrier coatings[J]. Surface & Coatings Technology, 364, 187-195(2019).

[7] GORAL M, KOTOWSKI S, NOWOTNIK A et al. PS-PVD deposition of thermal barrier coatings[J]. Surface & Coatings Technology, 237, 51-55(2013).

[8] ŁATKA L. Thermal barrier coatings manufactured by suspension plasma spraying- a review[J]. Advances in Materials Science, 18, 95-117(2018).

[9] JONNALAGADDA K P, ERIKSSON R, LI X H et al. Thermal barrier coatings: life model development and validation[J]. Surface & Coatings Technology, 362, 293-301(2019).

[10] PARK H M, JUN S H, LYU G et al. Thermal durability of thermal barrier coatings in furnace cyclic thermal fatigue test: effects of purity and monoclinic phase in feedstock powder[J]. Journal of the Korean Ceramic Society, 55, 608-617(2018).

[11] KARLSSON A M. Modeling failures of thermal barrier coatings[J]. Key Engineering Materials, 333, 155-166(2007).

[12] HUA J J, ZHANG L P, LIU Z W et al. Progress of research on the failure mechanism of thermal barrier coatings[J]. Journal of Inorganic Materials, 27, 681-686(2012).

[13] MATSUI K. Sintering kinetics at constant rates of heating: mechanism of silica-enhanced sintering of fine zirconia powder[J]. Journal of the American Ceramic Society, 91, 2534-2539(2008).

[14] TSIPAS S A, GOLOSNOY I O, DAMANI R et al. The effect of a high thermal gradient on sintering and stiffening in the top coat of a thermal barrier coating system[J]. Journal of Thermal Spray Technology, 13, 370-376(2004).

[15] CHOI S R, ZHU D M, MILLER R A. Effect of sintering on mechanical properties of plasma-sprayed zirconia-based thermal barrier coatings[J]. Journal of the American Ceramic Society, 88, 2859-2867(2005).

[16] VAβEN R, CZECH N, MALLÉNER W et al. Influence of impurity content and porosity of plasma-sprayed yttria-stabilized zirconia layers on the sintering behaviour[J]. Surface and Coatings Technology, 141, 135-140(2001).

[17] PAUL S, CIPITRIA A, GOLOSNOY I O et al. Effects of impurity content on the sintering characteristics of plasma-sprayed zirconia[J]. Journal of Thermal Spray Technology, 16, 798-803(2007).

[18] XIE L, DORFMAN M R, CIPITRIA A et al. Properties and performance of high-purity thermal barrier coatings[J]. Journal of Thermal Spray Technology, 16, 804-808(2007).

[19] HELMINIAK M A, YANAR N M, PETTIT F S et al. The behavior of high-purity, low-density air plasma sprayed thermal barrier coatings[J]. Surface & Coatings Technology, 204, 793-796(2009).

[20] MARKOCSAN N, NYLÉN P, WIGREN J et al. Low thermal conductivity coatings for gas turbine applications[J]. Journal of Thermal Spray Technology, 16, 498-505(2007).

[21] ZHU D M, MILLER R A. Development of advanced low conductivity thermal barrier coatings[J]. International Journal of Applied Ceramic Technology, 1, 86-94(2004).

[22] WANG L, WANG Y, SUN X G et al. Influence of pores on the thermal insulation behavior of thermal barrier coatings prepared by atmospheric plasma spray[J]. Materials and Design, 32, 36-47(2011).

[23] ZHU D M, MILLER R A. Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions[J]. Journal of Thermal Spray Technology, 9, 175-180(2000).

[24] ZHU D M, MILLER R A, NAGARAJ B A et al. Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady- state laser heat flux technique[J]. Surface and Coatings Technology, 138, 1-8(2001).

[25] LI Y J, YU Y G, JI X J et al. Effects of Al₂O₃ content on properties of YSZ thermal barrier coatings[J]. Thermal Spray Technology, 10, 61-67(2018).

[26] GREMILLARD L, EPICIER T, CHEVALIER J et al. Microstructural stucy of silica-doped zirconia ceramics[J]. Acta Materialia, 48, 4647-4652(2000).

[27] HODGSON S N B, CAWLEY J, CLUBLEY M. The role of SiO₂ impurities in the microstructure and properties of Y-TZP[J]. Journal of Materials Processing Technology, 86, 139-145(1999).

[28] MATSUI K, YOSHIDA H, IKUHARA Y. Phase-transformation and grain-growth kinetics in yttria-stabilized tetragonal zirconia polycrystal doped with a small amount of alumina[J]. Journal of the European Ceramic Society, 30, 1679-1690(2010).

[29] SAKKA Y, ISHII T, SUZUKI T S et al. Fabrication of high-strain rate superplastic yttria-doped zirconia polycrystals by adding manganese and aluminum oxides[J]. Journal of the European Ceramic Society, 24, 449-453(2004).

[30] WU S X, BROOK R J. Kinetics of densification in stabilized zirconia[J]. Solid State Ionics, 14, 123-130(1984).