[1] Schubert E F, Kim J K. Solid-state light sources getting smart[J]. Science, 308, 1274-1278(2005).

[2] Luo X B, Hu R, Liu S et al. Heat and fluid flow in high-power LED packaging and applications[J]. Progress in Energy and Combustion Science, 56, 1-32(2016).

[3] Peng Y, Li R X, Wang S M et al. Luminous properties and thermal reliability of screen-printed phosphor-in-glass-based white light-emitting diodes[J]. IEEE Transactions on Electron Devices, 64, 1114-1119(2017).

[4] Li J M, Liu Z Q, Wei T B et al. Development summary of semiconductor lighting in China[J]. Acta Optica Sinica, 41, 0116002(2021).

[5] Wang Z, Wang Y T, Liu J X et al. Preparation of PCB Substrate embedded with ceramic circuit board and performance of LED packaging[J]. Chinese Journal of Luminescence, 43, 1139-1146(2022).

[6] Wang X Q, Wang C. Influence of shell thickness on luminescent properties of Cu-doped Zn-In-S/ZnS core/shell quantum dots WLEDs[J]. Laser＆Optoelectronics Progress, 58, 1723003(2021).

[7] Liu Y, Huang Y Q, Zhao Y J et al. Luminescence properties of doped two-dimensional materials[J]. Laser＆Optoelectronics Progress, 58, 1516014(2021).

[8] Mou Y, Yu Z K, Lei Z Y et al. Enhancing opto-thermal performances of white laser lighting by high reflective phosphor converter[J]. Journal of Alloys and Compounds, 918, 165637(2022).

[9] Zhang K, Xiao G D, Zeng Z M et al. A novel thermally conductive transparent die attach adhesive for high performance LEDs[J]. Materials Letters, 235, 216-219(2019).

[10] Peng Y, Chen M X, Luo X B. Status and perspectives of deep ultraviolet LED packaging technology[J]. Chinese Journal of Luminescence, 42, 542-559(2021).

[11] Yang C X, Li X, Kong Y F et al. High power COB LED modules attached by nanosilver paste[J]. Chinese Journal of Luminescence, 37, 94-99(2016).

[12] Zhang B T, Sun R, Wang Z P. LED Die bonding materials[J]. Journal of Integration Technology, 3, 1-7(2014).

[13] Chen C J, Chen C M, Horng R H et al. Thermal management and interfacial properties in high-power GaN-based light-emitting diodes employing diamond-added Sn-3 wt.%Ag-0.5 wt.%Cu solder as a die-attach material[J]. Journal of Electronic Materials, 39, 2618-2626(2010).

[14] Cheng L C, Chen C M, Chen M G et al. A high-temperature die-bonding structure fabricated at low temperature for light-emitting diodes[J]. IEEE Electron Device Letters, 36, 835-837(2015).

[15] Jiang C S, Fan J J, Qian C et al. Effects of voids on mechanical and thermal properties of the die attach solder layer used in high-power LED chip-scale packages[J]. IEEE Transactions on Components, 8, 1254-1262(2018).

[16] Mou Y, Wang H, Peng Y et al. Enhanced heat dissipation of high-power light-emitting diodes by Cu nanoparticle paste[J]. IEEE Electron Device Letters, 40, 949-952(2019).

[17] Peng J, Wang R C, Liu H S et al. Mechanical reliability of transient liquid phase bonding of Au-Sn solder with Ni(Cu) substrates[J]. Journal of Materials Science, 29, 313-322(2018).

[18] Yoon J W, Bae S, Lee B S et al. Bonding of power device to ceramic substrate using Sn-coated Cu micro paste for high-temperature applications[J]. Applied Surface Science, 515, 146060(2020).

[19] Shao H K, Wu A P, Bao Y D et al. Novel transient liquid phase bonding through capillary action for high-temperature power devices packaging[J]. Materials Science and Engineering A, 724, 231-238(2018).

[20] Tuo C J, Yao Z H, Liu W et al. Fabrication and characteristics of Cu@Ag composite solder preform by electromagnetic compaction for power electronics[J]. Journal of Materials Processing Technology, 292, 117056(2021).

[21] Chen T F, Siow K S. Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) joints[J]. Journal of Alloys and Compounds, 866, 158783(2021).

[22] Liu Z Y, Cai J, Wang Q et al. Modified pulse laser deposition of Ag nanostructure as intermediate for low temperature Cu-Cu bonding[J]. Applied Surface Science, 445, 16-23(2018).

[23] Ren H, Zhang H Q, Wang W G et al. Low-temperature sintering and joint reliability of metal nano-particle paste[J]. Chinese Journal of Lasers, 48, 0802011(2021).

[24] Chen C T, Suganuma K. Large-scale ceramic-metal joining by nano-grained Ag particles paste sintering in low-temperature pressure-less conditions[J]. Scripta Materialia, 195, 113747(2021).

[25] Yang F, Zhu W B, Wang X T et al. Enhancement of high-temperature stability in sintered Ag joints on bare Cu substrates by inducing the transient liquid phase[J]. Materials Letters, 292, 129620(2021).

[26] Liu J X, Mou Y, Peng Y et al. Novel Cu-Ag composite nanoparticle paste for low temperature bonding[J]. Materials Letters, 248, 78-81(2019).

[27] Xie Y J, Wang Y J, Mei Y H et al. Rapid sintering of nano-Ag paste at low current to bond large area (>100 mm2) power chips for electronics packaging[J]. Journal of Materials Processing Technology, 255, 644-649(2018).

[28] Tang H, Li Q, Zhang Q F et al. Effect of bow Tie type silver metal array structure on light extraction efficiency of GaN-based light emitting diodes[J]. Acta Optica Sinica, 41, 2123001(2021).

[29] Pan S H, Yu H, Zhao Y P et al. FDTD simulation and study on effect of metal nanoparticle introduction on light extraction of top-emitting OLED[J]. Acta Optica Sinica, 42, 0916001(2022).

[30] Liu J X, Lei Z Y, Wang Q et al. Fabrication of Sn-plated Cu foam for high-efficiency transient-liquid-phase bonding[J]. Materials Today Communications, 30, 103058(2022).

[31] Tang Y R, Zhao D, Yi X Z et al. Current and temperature effects on luminescence properties of blue and white LEDs[J]. Chinese Journal of Lasers, 48, 2103003(2021).