[1] Tkach R W. Scaling optical communications for the next decade and beyond[J]. Bell Labs Technical Journal, 14, 3-9(2010).

[2] Ellis A D, Zhao J, Cotter D. Approaching the non-linear Shannon limit[J]. Journal of Lightwave Technology, 28, 423-433(2010).

[3] Pei L, Li Z Q, Wang J S et al. Review on gain equalization technology of fiber amplifier using space division multiplexing[J]. Acta Optica Sinica, 41, 0106001(2021).

[4] Yu Z, Xu Z Y, Fu S N. Review of erbium-doped fiber for space-division multiplexing transmisison[J]. Designing Techniques of Posts and Telecommunications, 77-82(2018).

[5] Richardson D J, Fini J M, Nelson L E. Space-division multiplexing in optical fibres[J]. Nature Photonics, 7, 354-362(2013).

[6] Li G F, Bai N, Zhao N B et al. Space-division multiplexing: the next frontier in optical communication[J]. Advances in Optics and Photonics, 6, 413-487(2014).

[7] Winzer P J. Making spatial multiplexing a reality[J]. Nature Photonics, 8, 345-348(2014).

[8] Zhu B, Taunay T F, Yan M F et al. Seven-core multicore fiber transmissions for passive optical network[J]. Optics Express, 18, 11117-11122(2010).

[9] Wada M, Sakamoto T, Yamamoto T et al. Cladding pumped randomly coupled 12-core erbium-doped fiber amplifier with low mode-dependent gain[J]. Journal of Lightwave Technology, 36, 1220-1225(2018).

[10] Berdagué S, Facq P. Mode division multiplexing in optical fibers[J]. Applied Optics, 21, 1950-1955(1982).

[11] Ma L, Tsujikawa K, Hanzawa N et al. Design and fabrication of low loss hole-assisted few-mode fibers with consideration of surface imperfection of air holes[J]. Journal of Lightwave Technology, 34, 5164-5169(2016).

[12] Sillard P, Bigot-Astruc M, Boivin D et al. Few-mode fiber for uncoupled mode-division multiplexing transmissions[C](2011).

[13] Kasahara M, Saitoh K, Sakamoto T et al. Design of three-spatial-mode ring-core fiber[J]. Journal of Lightwave Technology, 32, 1337-1343(2014).

[14] Wada M, Sakamoto T, Aozasa S et al. Differential modal gain reduction of L-band 5-mode EDFA using EDF with center depressed core index[J]. Journal of Lightwave Technology, 35, 762-767(2017).

[15] Lopez-Galmiche G, Sanjabi Eznaveh Z, Antonio-Lopez J E et al. Few-mode erbium-doped fiber amplifier with photonic lantern for pump spatial mode control[J]. Optics Letters, 41, 2588-2591(2016).

[16] Herbster A F, Romero M A. Few-mode erbium-doped fiber amplifier design method based on the signal-pump overlap integral[J]. Optical Engineering, 53, 096101(2014).

[17] Ip E, Li M J, Gu R Y et al. Components for future optical networks based on few-mode fiber[C], AW3G.3(2013).

[18] Zhang Z Z, Guo C, Cui L et al. All-fiber few-mode erbium-doped fiber amplifier supporting six spatial modes[J]. Chinese Optics Letters, 17, 118-122(2019).

[19] Bai N, Ip E, Wang T et al. Multimode fiber amplifier with tunable modal gain using a reconfigurable multimode pump[J]. Optics Express, 19, 16601-16611(2011).

[20] Jung Y, Alam S, Li Z et al. First demonstration and detailed characterization of a multimode amplifier for Space Division Multiplexed transmission systems[J]. Optics Express, 19, B952-B957(2011).

[21] Kang Q, Lim E L, Jung Y et al. Accurate modal gain control in a multimode erbium doped fiber amplifier incorporating ring doping and a simple LP01 pump configuration[J]. Optics Express, 20, 20835-20843(2012).

[22] Salsi M, Ryf R, Le Cocq G et al. A six-mode erbium-doped fiber amplifier[C], Th.3.A.6(2012).

[23] Zhang Z Z, Guo C, Cui L et al. 21 spatial mode erbium-doped fiber amplifier for mode division multiplexing transmission[J]. Optics Letters, 43, 1550-1553(2018).

[24] Wang W S, Ning T G, Pei L et al. Gain equalization of few-mode fiber amplifier based on genetic algorithm[J]. Acta Optica Sinica, 41, 0906001(2021).

[25] Ruan J R, Pei L, Zheng J J et al. Gain equalization of 4-mode erbium-doped fiber amplifier based on cladding pump[J]. Acta Optica Sinica, 42, 0406001(2022).

[26] Townsend J E, Poole S B, Payne D N. Solution-doping technique for fabrication of rare-earth-doped optical fibres[J]. Electronics Letters, 23, 329-331(1987).

[27] Pal M, Sen R, Paul M C et al. Investigation of the deposition of porous layers by the MCVD method for the preparation of rare-earth doped cores of optical fibres[J]. Optics Communications, 254, 88-95(2005).

[28] Vienne G G, Caplen J E, Dong L et al. Fabrication and characterization of Yb3+: Er3+ phosphosilicate fibers for lasers[J]. Journal of Lightwave Technology, 16, 1990(1998).

[29] Zhang Z X, Jiang Z W, Peng J G et al. Fabrication and characterization of Er3+: Yb3+ Co-doped phosphosilicate fibers[J]. Journal of Inorganic Materials, 27, 485-488(2012).

[30] Li H Q, Liu C P, Zhao N et al. Study on the absorption coefficient measurement of Yb-doped fiber[J]. Optics & Optoelectronic Technology, 15, 72-75(2017).