[1] L JIAN Z, L ZHAO, L PAN H et al. Carbon coated Na₃V₂(PO₄)₃ as novel electrode material for sodium-ion batteries. Electrochemistry Communications, 14, 86-89(2012).

[2] L ZHAO, M ZHAO J, S HU Y et al. Disodium terephthalate (Na₂C₈H₄O₄) as high performance anode material for low-cost room-temperature sodium-ion battery. Advanced Energy Materials, 2, 962-965(2012).

[3] L RUAN Y, F GUO, J LIU J et al. Optimization of Na₃Zr₂Si₂PO₁₂ ceramic electrolyte and interface for high performance solid-state sodium battery. Ceramics International, 45, 1770-1776(2019).

[4] J VETTER, P NOVAK, R WAGNER M et al. Ageing mechanisms in lithium-ion batteries. Journal of Power Sources, 147, 269-281(2005).

[5] N KAMAYA, K HOMMA, Y YAMAKAWA et al. A lithium superionic conductor. Nature Materials, 10, 682-686(2011).

[6] M TARASCON J, M ARMAND. Issues and challenges facing rechargeable lithium batteries. Nature, 414, 359-367(2001).

[7] A KHOKHAR W, N ZHAO, L HUANG W et al. Different behaviors of metal penetration in Na and Li solid electrolytes. ACS Applied Materials & Interfaces, 12, 53781-53787.

[8] M OUDENHOVEN J F, L BAGGETTO, L NOTTEN P H. All- solid-state lithium-ion microbatteries: a review of various three- dimensional concepts. Advanced Energy Materials, 1, 10-33(2011).

[9] L ZHAO C, L LIU L, G QI X et al. Solid-state sodium batteries. Advanced Energy Materials, 8, 1703012(2017).

[10] A HAYASHI, K NOI, A SAKUDA et al. Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries. Nature Communications, 3, 856(2012).

[11] F LOU S, F ZHANG, K FU C et al. Interface issues and challenges in all-solid-state batteries: lithium, sodium, and beyond. Advanced Materials, 33, 2000721(2020).

[12] L HUANG W, N ZHAO, J BI Z et al. Can we find solution to eliminate Li penetration through solid garnet electrolytes?. Materials Today Nano, 10, 100075(2020).

[13] L JIAN Z, S HU Y, L JI X et al. NASICON-structured materials for energy storage. Advanced Materials, 29, 1601925(2016).

[14] R HOU W, W GUO X, Y SHEN X et al. Solid electrolytes and interfaces in all-solid-state sodium batteries: progress and perspective. Nano Energy, 52, 279-291(2018).

[15] B GOODENOUGH J, H Y P HONG, J A KAFALAS. Fast Na⁺-ion transport in skeleton structures. Materials Research Bulletin, 11, 203-220(1976).

[16] P HONG H Y. Crystal structures and crystal chemistry in the system Na_1+xZr₂Si_xP_3-xO₁₂. Materials Research Bulletin, 11, 173-182(1976).

[17] B RAN L, A BAKTASH, M LI et al. Sc, Ge co-doping NASICON boosts solid-state sodium ion batteries’ performance. Energy Storage Materials, 40, 282-291(2021).

[18] J YANG, Z LIU G, M AVDEEV et al. Ultrastable all-solid-state sodium rechargeable batteries. ACS Energy Letters, 5, 2835-2841(2020).

[19] Y LENG H, J HUANG J, Y NIE J et al. Cold sintering and ionic conductivities of Na_3.256Mg_0.128Zr_1.872Si₂PO₁₂ solid electrolytes. Journal of Power Sources, 391, 170-179(2018).

[20] C HUANG C, M YANG G, H YU W et al. Gallium-substituted Nasicon Na₃Zr₂Si₂PO₁₂ solid electrolytes. Journal of Alloys And Compounds, 855, 157501(2021).

[21] Z ZHANG Z, H ZHANG Q, N SHI J et al. A self-forming composite electrolyte for solid-state sodium battery with ultralong cycle life. Advanced Energy Materials, 7, 1601196(2017).

[22] N ANANTHARAMULU, K RAO K, G RAMBABU et al. A wide-ranging review on Nasicon type materials. Journal of Materials Science, 46, 2821-2837(2011).

[23] X WANG X, H LIU Z, H TANG Y et al. Low temperature and rapid microwave sintering of Na₃Zr₂Si₂PO₁₂ solid electrolytes for Na-ion batteries. Journal of Power Sources, 481, 228924(2021).

[24] M GRADY Z, K TSUJI, A NDAYISHIMIYE et al. Densification of a solid-state NASICON sodium-ion electrolyte below 400 ℃ by cold sintering with a fused hydroxide solvent. ACS Applied Energy Materials, 3, 4356-4366(2020).

[25] J SHAO Y, M ZHONG G, X LU Y et al. A novel NASICON- based glass-ceramic composite electrolyte with enhanced Na-ion conductivity. Energy Storage Materials, 23, 514-521(2019).

[26] Y LENG H, Y NIE J, J LUO. Combining cold sintering and Bi₂O₃-activated liquid-phase sintering to fabricate high-conductivity Mg-doped NASICON at reduced temperatures. Journal of Materiomics, 5, 237-246(2019).

[27] S OH J A, C HE L, A PLEWA et al. Composite NASICON (Na₃Zr₂Si₂PO₁₂) solid-state electrolyte with enhanced Na⁺ ionic conductivity: effect of liquid phase sintering. ACS Applied Materials & Interfaces, 11, 40125-40133(2019).

[28] J G P DA SILVA, M BRAM, M LAPTEV A et al. Sintering of a sodium-based NASICON electrolyte: a comparative study between cold, field assisted and conventional sintering methods. Journal of the European Ceramic Society, 39, 2697-2702(2019).

[29] H WANG, K OKUBO, M INADA et al. Low temperature- densified NASICON-based ceramics promoted by Na₂O-Nb₂O₅-P₂O₅ glass additive and spark plasma sintering. Solid State Ionics, 322, 54-60(2018).

[30] Y HUO H, J GAO, N ZHAO et al. A flexible electron-blocking interfacial shield for dendrite-free solid lithium metal batteries. Nature Communications, 12, 176(2021).

[31] Y JIA M, N ZHAO, Y HUO H et al. Comprehensive investigation into garnet electrolytes toward application-oriented solid lithium batteries. Electrochemical Energy Reviews, 3, 656-689(2020).

[32] N ZHAO, W KHOKHAR, J BI Z et al. Solid garnet batteries. Joule, 3, 1190-1199(2019).

[33] B VERTRUYEN, N ESHRAGHI, C PIFFET et al. Spray-drying of electrode materials for lithium- and sodium-ion batteries. Materials, 11, 1076(2018).

[34] Y KOU Z, C MIAO, Y WANG Z et al. Novel NASICON-type structural Li_1.3Al_0.3Ti_1.7Si_xP_5(3-0.8x)O₁₂ solid electrolytes with improved ionic conductivity for lithium ion batteries. Solid State Ionics, 343, 115090(2019).

[35] L SHEN, J YANG, Z LIU G et al. High ionic conductivity and dendrite-resistant NASICON solid electrolyte for all-solid-state sodium batteries. Materials Today Energy, 20, 100691(2021).

[36] Q LI Y, Z WANG, L LI C et al. Densification and ionic- conduction improvement of lithium garnet solid electrolytes by flowing oxygen sintering. Journal of Power Sources, 248, 642-646(2014).