[1] [1] PAN J, STORER R, SALLADE R, et al.. Critical variables of solder paste stencil printing for micro-BGA and fine-pitch QFP ［J］. IEEE Trans. on Electron. Pack., 2004,27(2):125-132.

[2] [2] JU M, LEE Y, LEE J, et al.. Double screen printed metallization of crystalline silicon solar cells as low as 30 μm metal line width for mass production［J］. Sol. Energ. Mat. Sol. C., 2012, 100: 204-208.

[3] [3] YU A, BONEV I, ZSOMBOR-MURRAY P. New XY-Theta positioning table with partially decoupled parallel kinematics［C］. Proceeding of the IEEE Int. Symp. On Ind. Electron., Montreal, QC, Canada: ISIE, 2006:3108-3112.

[4] [4] GAO M, LI T M, TANG X Q. Calibration experiment research of parallel kinematics machine with a few degrees［J］. Chinese J. of Mech. Eng., 2003, 39(9):118-122. (in Chinese)

[5] [5] JOUBAIR A, SLAMNI M, BONEV I. A novel XY-Theta precision table and a geometric procedure for its kinematic calibration［J］. Robot. Cim.-Int. Manuf., 2012, 28: 57-65.

[6] [6] CHANG P, WANG J S, LI T M, et al.. Step kinematic calibration of a 3-DOF planar parallel kinematic machine tool［J］. Sci. China Ser. E-Tech. Sci., 2008, 51(12): 2155-2167.

[7] [7] HE X M DING H SH, FU T, et al.. Review on kinematic calibration of parallel kinematic machine［J］. Mach. Tool & Hydraulics,2004, 10:9-11. (in Chinese)

[8] [8] ZOU H, NOTASH L. Discussion on the camera-aided calibration of parallel manipulators［C］. Proceeding of CCToMM Symp. Mech. Mach., and Mechatron., Saint-Hubert, QC, Canada: CD-ROM, 2001:1-2.

[9] [9] LIANG J L, KUANG Y C, CHEN J Z, et al.. A novel XY-Theta alignment stage for screen printing and its accuracy analysis［C］. Proceeding of the IEEE Int. Conf. on Mech. and Autom., Chengdu, China: ICMA, 2012:1352-1357.

[10] [10] ZHANG X M, KUANG Y C, LU SH L, et al.. A L type double cameras image acquisition device for automatic screen printer. China:ZL20060123893.4［P］.2007-05-30.

[11] [11] MERLET J-P. Direct kinematic of planar parallel manipulators［C］. Proceeding of the IEEE Int. Conf. on Robot. and Autom., Minneapolis, USA: ICRA, 1994:3744-3749.

[12] [12] BRAND P, MOHR R. Accuracy in iamge measure［C］. Proceeding of SPIE Conf. Videometrics III, Vol. 2350, Boston, Ma, USA, 1994: 218-228.

[13] [13] WANG J M, PU ZH B, ZHAO H, et al.. A new method for calibrating 2-D image measuring systems［J］. J. of Harbin Institute of Technology, 2000, 32(3):37-41. (in Chinese)

[14] [14] ZHANG W J, YANG Y L, LI D, et al.. Key algorithms of automatic image measurement system［J］. Opt. Precision Eng., 2007, 15(2):294-301. (in Chinese)

[15] [15] LIANG J L, ZHANG X M, MO J H. Accuracy analysis and calibration of a XY-Theta parallel stage［J］. J. of South China University of Technology, 2012,11. (in Chinese)

[16] [16] Manipulating industrial robots—performance criteria and related test methods, ISO 9283, 1998.